PDA

View Full Version : wiper arm connection



steve1434
29-01-14, 02:51 PM
Hi. My drivers side wiper keeps popping off the linkage. Its a ball and socket joint. The socket just falls off when wipers have been on for a few seconds.

Vauxhall have discontinued the parts, but they didn't shed much light on what was needed, or if I have something missing.

Any ideas?

GRUNT 16V
29-01-14, 03:02 PM
common problem in my rally days we modded the linkage to take rose joints this never ever broke

steve1434
29-01-14, 03:41 PM
I see. Will have to find a similar solution I guess :(

steve1434
29-01-14, 07:09 PM
Fixed it with a hair bobble in a figure of eight. Works for now til I can get it fixed properly :)

dgbnova#1
29-01-14, 07:19 PM
The used linkage are getting hard to find now most I get are beyond saving

steve1434
29-01-14, 09:54 PM
As I am finding out mate, will just keep a handful of elastic bands etc in the glove box

mowgli
30-01-14, 01:18 AM
i had this happen back in the olden days... at a ton on the autobahn near dusseldorf..... only the drivers side stopped working in a cloudburst... once i'd got the car safely on the hard shoulder & managed to get rid of the pooey smell, i managed to get some more life out of the joint using a small punch & a hammer & peened some little dents round the outside of the socket hole, tightening it up. i got the car back to the uk a week later, bought a scrapyard linkage as a spare, ready to fit it but never got round to it & it lasted about 18months until i got the car written off in a misunderstanding with a cavalier.

steve1434
30-01-14, 07:46 AM
Yeah glad I wasn't going too fast as it was bloody chucking it down! It seems that the socket part is a plastic insert - will fiddle once the wife sods off to work haha

Damo
31-01-14, 08:37 PM
I squashed the end together a little to stop mine popping off.