c16se/(e16se?) rear water pipe needed urgently part no. GM 90354840 pic inside

[gav93]

:( as above mine was brittle tried to repair it but wont go again it must look exactly like this and have the part number 90354840 underneath
http://i249.photobucket.com/albums/gg228/photorobo/untitled_zps088a0b9a.png (http://s249.photobucket.com/user/photorobo/media/untitled_zps088a0b9a.png.html)
can anyone help asap? cheers

[dgbnova#1]

Have you tryed Opel Classic parts Germany

[mowgli]

what does the Z16se one look like?

[gav93]

not the same mate , can anyone help me out? must have one laying around or a scrap c16se?

[dgbnova#1]

There are many people on here always asking about the c16 engines with not a lot of reply tbh
your best bet is ocp as I said or get a steel one modded to match yours if that's possible I don't know for sure but some models run steel not saying c16 or e16 do but may be an option

[gav93]

where can I get a steel one from? already rung tx motorsport they only cater for big blocks , proper gutted about this slapping myself right now ha! thanks for your help guys hopefully someone will see this and hopefully have one :)

[dgbnova#1]

Think 1,3 1.2 have steel ones but will need to add what pipes you need a good welder can do this no probs

[gav93]

I can weld no problem but where would I find the steel pipe fittings as I may need to add a fitting ? thanks for your help there mate

[dgbnova#1]

Just find a local pipe welding firm and take your plastic pipe or sizes and see if they have some they will sell you got a great guy here who does just that if you get the sizes Possably get you some but no promises

[gav93]

ok matey will have a look around if not I guess if I fine some steel tube the same diameter that will get me out of trouble I guess? what novas have the steel water pipe then mate?

[dgbnova#1]

1,2 1.3 as far as I rember so I prob even got one but not able to get it to you for a bit but I would try ocp first as Possably one on the shelf lol

[gav93]

ocp? there a link to that at all ?

[dgbnova#1]

Pm sent

[Wazza30]

I think I have a steel nova one lying around if you want me to look?

[gav93]

I think I have a steel nova one lying around if you want me to look?

please mate if you could see if you got it wazza and let me know grab a pic if you can cheers :)

[Wazza30]

please mate if you could see if you got it wazza and let me know grab a pic if you can cheers :)

http://i177.photobucket.com/albums/w212/gary23_2007/S7300636.jpg (http://s177.photobucket.com/user/gary23_2007/media/S7300636.jpg.html)

Is that any good?

[gav93]

replied to your pm wazza, cheers dude

[dgbnova#1]

Best check the measurements of it all od of pipes and the lengths of the pipe as they could be smaller

ocp have not got any but 2 others do have them at the price I pmd you

[gav93]

I will get the guy t double check the diameter and length of pipe cheer mate, and the prices you pm'ed me were far to high mate :(

[dgbnova#1]

Ye Possably only sorce of one if you don't get a used one

[nevidred]

I have a few e16 ones but they don't have the small outlet at the water pump end !!
Where does this go on your engine?? Would it be possible to use the rubber s connector from an e16 to join this pipe to the pump as they have a small rubber hose Tee,d in ??