mk1 nova c20let

[saberautospares]

Here we have my finished nova...
put this up for sale a few months back as didnt think i would finish it!!
However it is finished....

I am going to miss some bits out as everyone always does so heres my number 07896202559 if you need any info...

First of it started of as a 1.2 L in red
When i brought it it had a 2.0 8v with few mods
It now has a c20let engine

The engine has only covered just shy of 350 miles since having a full rebuild
this inc new gaskets.. seals.. shells piston rings ect...

spec of the engine is the following
xe inlet cam with kent verniers
regal phase 3 with powerwheel (10 settings)
charge cooler setup
Currently Ran 244 bhp and 242 torque set to 11psi on the 2/11/13
did not want to go too mad with boost due to not being fully run in yet...

has gte interior.. kit and mk2 astra gte digital clocks..

shell has had new new paint job but it is not 100% perfect
has had new shocks..springs.. bushes..steering rack.. bearings.. brakes..

exhaust is loud and car torque steers like you would not believe which im guessing anyone who wants to buy will know that anyway.

pictures will show more than words so please view and if any more are needed then please do ask pref txt as its more instant than me logging on

http://i1337.photobucket.com/albums/o675/Christopher_Jinks/novac20let1_zps09edb254.jpg (http://s1337.photobucket.com/user/Christopher_Jinks/media/novac20let1_zps09edb254.jpg.html)

http://i1337.photobucket.com/albums/o675/Christopher_Jinks/novac20let_zpse4868936.jpg (http://s1337.photobucket.com/user/Christopher_Jinks/media/novac20let_zpse4868936.jpg.html)

http://i1337.photobucket.com/albums/o675/Christopher_Jinks/novac20let2_zpsef1ea096.jpg (http://s1337.photobucket.com/user/Christopher_Jinks/media/novac20let2_zpsef1ea096.jpg.html)

http://i1337.photobucket.com/albums/o675/Christopher_Jinks/novac20let4_zps2e2cb71d.jpg (http://s1337.photobucket.com/user/Christopher_Jinks/media/novac20let4_zps2e2cb71d.jpg.html)

have not got a price as such as the price on these vary so much but if had to put a price between £2500-2800

[Will F]

What suspension, brakes and exhaust has it got?
also has it been stitch welded?
pics of arches, engine bay seams, boot floor etc

[saberautospares]

kyb shocks with 40mm lowering springs.. 256 mm fronts and rear drums..stainless powerflow system 2 1/2'' with slightly oversized tailpipe!
no stitchwelding as engine bay / front end was solid! understand some people swear by it and say its a must but its the third one owned by myself and a few mates that hasnt been stitch welded and non have pulled apart ect
a few of when was being built however will get some better pics taken tonight..
http://i1337.photobucket.com/albums/o675/Christopher_Jinks/IMG_0705_zpsc112e4ac.jpg (http://s1337.photobucket.com/user/Christopher_Jinks/media/IMG_0705_zpsc112e4ac.jpg.html)
http://i1337.photobucket.com/albums/o675/Christopher_Jinks/photo_zps7cd7c0b2.jpg (http://s1337.photobucket.com/user/Christopher_Jinks/media/photo_zps7cd7c0b2.jpg.html)
http://i1337.photobucket.com/albums/o675/Christopher_Jinks/IMG_0277_zps13b3a1b3.jpg (http://s1337.photobucket.com/user/Christopher_Jinks/media/IMG_0277_zps13b3a1b3.jpg.html)
http://i1337.photobucket.com/albums/o675/Christopher_Jinks/IMG_0075_zpsa6c9d239.jpg (http://s1337.photobucket.com/user/Christopher_Jinks/media/IMG_0075_zpsa6c9d239.jpg.html)
http://i1337.photobucket.com/albums/o675/Christopher_Jinks/IMG_0090_zps12e1c71b.jpg (http://s1337.photobucket.com/user/Christopher_Jinks/media/IMG_0090_zps12e1c71b.jpg.html)
http://i1337.photobucket.com/albums/o675/Christopher_Jinks/IMG_0145_zpsbb2cb554.jpg (http://s1337.photobucket.com/user/Christopher_Jinks/media/IMG_0145_zpsbb2cb554.jpg.html)

will get closer pics of the areas asked for when home from work as have non on me atm

[saberautospares]

The pics i have just uploaded are the pics before brakes and suspension ect was renewned!!