intercooler

[novait]

hello all,
where is the best place to buy an intercooler been looking all over Google / eBay (are they good enough?) etc.. etc. also what size dose every one use? been looking round the forum for picture / ideas etc.
can any one help?
cheer
ben

[burgo]

hello all,
where is the best place to buy an intercooler been looking all over Google / eBay (are they good enough?) etc.. etc. also what size dose every one use? been looking round the forum for picture / ideas etc.
can any one help?
cheer
ben

Get a frontera one for £20

[novait]

Get a frontera one for £20

have you got any measurement burgo? any idea what type of bhp they can take?

[philip]

What specs your engine now or go ing to be?

[novait]

What specs your engine now or go ing to be?

looking into building a 2.0 8v turbo with a t28 turbo!!!, been looking into it for last 3 weeks so just trying to find the parts etc now, think I have a list with all the parts I need, will post up a new post soon for everyone input cheers

[scott.parker]

Ive been looking to buy a frontera one for my project, but cant find one for under £40/50 posted...

[novait]

Ive been looking to buy a frontera one for my project, but cant find one for under £40/50 posted...

well if the one burgo got any good for you Scott your more than welcome to talk to him about it.
im just trying to get some info and a price list together the the moment and won't be buying any parts for a while

[Benn]

I just looked on Ebay to find the size i wanted, was about £55 for a jap spec dealer...

[novait]

I just looked on Ebay to find the size i wanted, was about £55 for a jap spec dealer...


I've been looking and measuring all day Benn lol need to work out how to cut out the NEW crossmemeber as well so it fits with out cutting the bumper

[Benn]

Made a ic out of cardboard, then you can test fit it. How i did it, so i knew how far to sink it in and such.

[novait]

ok will get a cooler first the make up a template etc and go from there thanks for the help benn

[Martin.p]

I used a frontera one. Ive been told there good for up to 400bhp.
There's more in my thread (wanna be gte)
Some pics from thread.
http://i992.photobucket.com/albums/af46/martinstu/514C7E29-A1CF-4000-8A72-0267B4297DAC-4549-0000050AA3C86095-1.jpg



http://i992.photobucket.com/albums/af46/martinstu/39C0A341-23AB-4665-B885-6812291478BA-2028-000002C97127E841.jpg

Rad needs moving si intercooler pipes can fit down either side.http://i992.photobucket.com/albums/af46/martinstu/1356ECAD-5F9A-4584-900D-70E207C92130-2028-000002C97939A84D.jpg
Mk2 bupmer fitted over ic.
http://i992.photobucket.com/albums/af46/martinstu/885E65FF-B3FC-4F65-BF7E-929D7F3F8C93-2028-000002C98172397E.jpg
http://i992.photobucket.com/albums/af46/martinstu/20BB78F7-B3F7-4B74-B828-C85007C6A8F3-938-000000E0D99650B6.jpg

[novait]

Wicked thank you very much

[Martin.p]

There are 4 lugs on the frontera ic that I cut off 2 at top point upwards. And 2 that point out sideways about half way down. I cut all 4 off. The ones on top where no problem. But be carfull cutting the side ones! See 2nd pic down. Dont try to cut off anymore than what I did. The bit left on the side is hollow. (I had to have mine repaired coz I cut to deep)

Dont think its much problem when using gsi bumper. But youll need to take them off as best you can to fit under std one.

I also had to cut away the crash bar that sits in back of front bumper.

All thats left is a bit about 7" long on each side that connects to the fitting bracket.

[scott.parker]

See i was trying to figure out if you could fit one from a frontera up the other way round, so it sits close to the slam, and half behind the bumper etc, as i reckon on a mk1 all in one theres possibley enough room behind the grill area with a slight bit of trimming..

[Martin.p]

Not sure about that scott. I don't think restricting air to the radiator would be a good compromise.
Running a let or any other bigger engine on a 1.6 rad is pushing limits imo. And the grill opening is yhe the largest and it has the biggest void behind it to aid through flow.
Where my ic sits 1/3 has cross membet behind it. But bumper opening sits over the upper half. (Which still has rad behind that. And turbo right behind rad) all restricting air flow.
My priority would/was/is

Rad
Ic
Oil cooler

[scott.parker]

I was thinking of using some small front mount blowing fans on the rad, and if enough room another on back pulling air.

[Benn]

I was thinking of using some small front mount blowing fans on the rad, and if enough room another on back pulling air.

If you use good slim line fans, you wont need 3. I use to small ones (7inch) on the front of my rad, They cool it really well.

[mowgli]

look at van ones.. the renault, citroen, and ford ones have all sorts of slim ic's stuck in them.

[novait]

Thank you for all your help guys. Been looking at few build threads and got loads of ideas. Was thinking of the twin small cooling fan set up to..
just need to start buying few parts and making a start ::)