PDA

View Full Version : C20XE and Nova bits clearout



Mieran
09-10-13, 11:32 AM
C20XE engine loom.

Looks like an early 20XE engine loom from a GTE because it has the fuel pump relay in the engine bay but it also has a lambda plug too so must be a very early C20XE loom.

In good condition, all plugs are intact and there only thing missing is the 4 metal injector clips and mini loom.

£50

http://s16.postimg.org/o0knxkgz9/IMG_1264.jpg



C20XE starting and charging loom.

£10

http://s16.postimg.org/6ehe6iy9h/IMG_1265.jpg



C20XE flat flywheel

£20

http://s16.postimg.org/9nvtczmd1/IMG_1266.jpg



Nova Morettes including grille and loom (loom in not in the pic but included)

In very good condition.

£150

http://s16.postimg.org/hhweydu5x/IMG_1267.jpg



Nova track dash

Fiber glass mould taken off a MK2 dash and fitted with a digi clocks and MK2 plugs for hazard, lights, windows, fogs.

Clocks come with both white & black plugs and tranducer & wiring for it.

£120

http://s16.postimg.org/glvc56v3p/IMG_1269.jpg



Nova column with snap off boss

Boss comes with 2 release keys

£60

http://s16.postimg.org/oiker5vxx/IMG_1270.jpg



Sparco 'Nova' steering wheel

300mm leather

£50

http://s16.postimg.org/3s1vpl71x/IMG_1274.jpg



Nova part smoked rear lights

£10

http://s16.postimg.org/xmitrlxit/IMG_1271.jpg



Clutch for fitting big block box on a small block engine

Has splines to match F16/F18/F20 input shaft but is 200mm diameter so will fit small block flywheel

Made by Valeo and has loads of meat on it still

£20

http://s16.postimg.org/kjn78c7at/IMG_1275.jpg

RyanGorman
12-10-13, 09:36 PM
Hi. How much for the starter and change loom posted ?

shaunboy84
12-10-13, 09:46 PM
nova morettes :O nice ha

chrisd1986
12-10-13, 10:52 PM
nova morettes :O nice ha

I know they always pop up when im skint

Mieran
29-10-13, 12:25 PM
Flywheel sold.

Bump

Mieran
18-11-13, 12:13 AM
Dash sold.

Bump

Mieran
05-12-13, 10:29 PM
Bump

mk3 vinny
06-12-13, 08:05 PM
just sent you a text mate hope you still got the same number im after the steering wheel and column as my just been bent after the attempted theft

Mieran
11-12-13, 11:15 PM
Column and steering wheel sold.

silk violet
12-12-13, 03:15 PM
Hi mate do you still have the loom and charging loom also wwhat number is on it where it plugs into ecu....???

Mieran
13-12-13, 10:57 AM
I still have both looms mate, part number on the plug is 1928401304

silk violet
13-12-13, 12:27 PM
Pm'd...