View Full Version : inlet/exhaust manifold studs
conza123
30-09-13, 09:04 PM
what thread size are they so i can order some new ones off the bay
conza123
06-10-13, 05:10 PM
bump anyone
Not sure if this will help, I don't know whatsize they are but I took some last year form my 1.4 off an 8v corsa in the scrappy. Same thread etc
conza123
06-10-13, 09:22 PM
They are M8
many thanks +rep
Novasport
06-10-13, 09:45 PM
M8x28
conza123
06-10-13, 09:49 PM
M8x28
ive order 40mm long ones will that be ok? or will i have to cut them down
8valve-craig
06-10-13, 09:53 PM
You might have to trim them depending on engine. I found the longer ones on an XE made the manifold hit the rad before it would come free.
conza123
06-10-13, 09:55 PM
You might have to trim them depending on engine. I found the longer ones on an XE made the manifold hit the rad before it would come free.
its a c14se if that helps
Jeff16v
10-10-13, 07:52 PM
I ordered mine from autovaux, do they have yours?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.