PDA

View Full Version : Locating an X18XE1



nad
23-09-13, 11:59 PM
Right, fair few of these about but I've yet to find one that comes complete, as in Engine, ECU, Loom, Transponder, Chip/Key etc etc. Have looked now at the possibility of just buying a donor vehicle, taking what I need and scrapping the rest.

I know it came in the 99 and early 00 Astra's and also some Vectra's but not sure which ones. The problem is, most people selling them haven't a clue and seeing as there isn't much difference between this and the Z18XE engine I can see me easily buying the wrong one over the net. Can it only be found out via the VIN number and if I had that, where would I get the info from other than Vauxhall?

Many thanks

Nad

Mark
24-09-13, 12:08 AM
All Vectra B's are XE1

Mark
24-09-13, 12:09 AM
And you could just ask the seller if there is a throttle cable attached to the throttle body?

nad
24-09-13, 12:11 AM
And you could just ask the seller if there is a throttle cable attached to the throttle body?


If its a lady owner I doubt they would want to pull the cover off. Out of interest, does the engine cover just pull off?

Secondly, did they all run distributors, or did they change after a certain time? I only ask as running the reg's through ECP, some gives the options for them, some dont.

Thanks

Mark
24-09-13, 12:13 AM
2 Torx screws to remove the cover.

None are distributor fed they all run top down coilpacks.

nad
24-09-13, 12:50 AM
All Vectra B's are XE1

Two of the 98 ones I've seen are running XE's not XE1's?

Pistol Pete
24-09-13, 12:56 AM
lol how much you willing to pay??!! My Vectra that i use every day without fail has one of these fitted!! Its the SXi version...

raf24
24-09-13, 01:12 AM
Two of the 98 ones I've seen are running XE's not XE1's?

Correct,the earlier vectras were z18xe,only the the later ones were x18xe1 so they are not all the same.

peester
24-09-13, 05:25 AM
Its facelift Vectra B 1.8's (1999 onwards) that have the X18xe1, small block engine:
http://img.photobucket.com/albums/v11/peester/x18xe1vec_zpsba576643.jpg (http://smg.photobucket.com/user/peester/media/x18xe1vec_zpsba576643.jpg.html)

Models earlier than that are big block (x18xe), so any '97 and '98 pre facelift 1.8 wont do.

1.8 Sri models (1999 onwards again) run the z18xe small block. Same engine essentially as the x18xe1 with a few subtle differences.

These engine codes are stamped on the block, by the gearbox. So any scrapyard will be able to tell them apart. I'm sure they'll have had this sort of enquiry before.

chrisd1986
24-09-13, 08:32 AM
Dgbnova"1 has just took one out of a astra and is complete with everything you need, just use your nova shafts n mounts and your away

dgbnova#1
24-09-13, 11:27 AM
Yep one here all removed by myself with key transponder and full loomnot cut anything and was running before I removed it

http://i1328.photobucket.com/albums/w535/dgbnova1/IMAG0583_zpsb68493f6.jpg

Mieran
24-09-13, 12:23 PM
All Vectra B's are XE1

Nope

First 1.8s were X18XE (big block), then X18XE1 (facelift), then Z18XE

Mark
24-09-13, 01:15 PM
Two of the 98 ones I've seen are running XE's not XE1's?

You were talking about X18XE1's and Z18XE's so I obviously wrongly assumed you would understand I was was basically saying that Vectra B's (with the small block engines.....) are XE1's....

Mark
24-09-13, 01:15 PM
Nope

First 1.8s were X18XE (big block), then X18XE1 (facelift), then Z18XE

Gees...see above.

nad
24-09-13, 03:57 PM
lol how much you willing to pay??!! My Vectra that i use every day without fail has one of these fitted!! Its the SXi version...

Well I've seen a few spare and repairs Astras with body panel damage etc going for less than £200 so trying to grab one of those fairly locally.


Its facelift Vectra B 1.8's (1999 onwards) that have the X18xe1, small block engine:
http://img.photobucket.com/albums/v11/peester/x18xe1vec_zpsba576643.jpg (http://smg.photobucket.com/user/peester/media/x18xe1vec_zpsba576643.jpg.html)

Models earlier than that are big block (x18xe), so any '97 and '98 pre facelift 1.8 wont do.

1.8 Sri models (1999 onwards again) run the z18xe small block. Same engine essentially as the x18xe1 with a few subtle differences.

These engine codes are stamped on the block, by the gearbox. So any scrapyard will be able to tell them apart. I'm sure they'll have had this sort of enquiry before.

Many thanks for clearing that up.


You were talking about X18XE1's and Z18XE's so I obviously wrongly assumed you would understand I was was basically saying that Vectra B's (with the small block engines.....) are XE1's....

No thats fair enough, I wrongly assumed you meant all 1.8 Vectra's had that engine.

Mark
24-09-13, 06:02 PM
No thats fair enough, I wrongly assumed you meant all 1.8 Vectra's had that engine.

:thumb: