PDA

View Full Version : Toyota yaris coils onto let with dta



Longdogcharlie
20-07-13, 04:22 PM
I have a set of 4 yaris coils, anyone know how to wire them up to the 3 wires coming from the dta..

Adam
20-07-13, 08:09 PM
Independent coils ?

You can't unless the ECU has four ignition output drivers, or you can add a module that can drive a cop ignition setup.

Less hassle just stick with a generic 2 output coilpack tbh

Graeme
20-07-13, 08:20 PM
It an be done as big Rons and Ste powells, call Chris at efi parts and see if he can help

Stuart
20-07-13, 09:32 PM
Could wire them up as if they were a coil pack.... Common 12v feed to all 4 then hook up the tdc pairs to the other two wires.

Lazy but doable.

Longdogcharlie
20-07-13, 09:50 PM
I think I have figured it out. The standard coil pack has 2 coils, fired by 2 wires.
Plug 1&4 and 2&3. I should be able to run a wasted spark set up with the same 2 wires.

Stuart
20-07-13, 10:00 PM
Yep, what I said lol

Longdogcharlie
20-07-13, 10:08 PM
Ok cool. Will make up a small loom and away we go..