Tachometer wiring

[ABoresta]

http://imageshack.com/scaled/large/221/ihb8.jpg


http://imageshack.com/scaled/large/819/y8w7.jpg


Hi all I have been fitting a set of mk2 dials to my mk1 allmthemwiring is complete for the 14 pin plug however the tachometer is still not working. I believe it could be down to the wire shown in the above image. It's a green wire with a black sleeve located near the ignition coil and the switched live.

The wire in the picture isn't plugged into or attached anywhere currently could this be the problem? Or do any of you know where this wire goes? Cheers


If any of you have any ideas to do with this wire or why the tachometer isn't working I would very much appreciate your help to get my c20xe loon back on the road!

Cheers

Alex

[dan23]

if I remember correct that wire goes on a spade terminal found on the standard coil
your coil looks like an aftermarket item an not original
I think the terminal is earth but not sure

[ABoresta]

I think it goes to the negative on the coil am I correct people?