PDA

View Full Version : Engines and looms


DAFTJOHN
14-07-13, 10:09 PM
I've taken the xe out my sr, along with the loom. A 1.3 sr engine is going back in it. What would I need wiring wise. I take it the xe loom from the ecu is not needed but is there much wiring for the 1.3 engine?
Marcusgeorge
14-07-13, 10:14 PM
Has hahahaha not a lot really on old carb engines would probably take you half a day to make the wires again :p and I bet the old wires are still in there just probably cut
DAFTJOHN
14-07-13, 10:16 PM
Lol yeah was having a look at pics. Starter motor and coil lol
kent14sr
15-07-13, 01:42 PM
Starter and alternator mini loom for a smallblock - that attached to positive terminal of battery (assuming it doesnt come on your 1.3 engine already). I have several, so PM me if you get stuck.

Other than than the black feed for the coil, and green wire for rev counter (also to coil)
DAFTJOHN
15-07-13, 04:36 PM
Starter and alternator mini loom for a smallblock - that attached to positive terminal of battery (assuming it doesnt come on your 1.3 engine already). I have several, so PM me if you get stuck.

Other than than the black feed for the coil, and green wire for rev counter (also to coil)

Cheers, will let you know