PDA

View Full Version : Uprated 1300 8v, F13 Quaife SCCR box and Quaife ATB - Phone number INCLUDED!!



Liam_Nova
25-06-13, 07:33 PM
Hi All,

Have a couple of items to selling, only selling due to wanting to upgrade:

Rare 1300 8v Sport engine. Was fully stripped down and rebuild last year (only completed at the beginning of september).

It has had full rebuilt with new bears, seals, gaskets, piston rings, oil and water pump.
The bottom end has been balanced and has ARP Rod bolts. The pistons are pocketed to take the larger valves this engine has.
It has also been ported and polished, has an AST 2 cam in it (only a mild road cam but pulls really well), it is also running uprated valve springs.
The engine has the rocker cover with oil breather on it (which has been painted blue)

The engine runs on twin 40s (rebuilt August) and has an irmscher inlet manifold. The engine also has custom made exhaust manifold which has been heat wrapped (built 2011).

The car has been rolling roaded and run in, so will just need to be put in and turned on.

The engine will come with inlet manifold, twin 40 carbs, exhaust manifold, Omex rev limiter. Can also supply coil to the engine.

Engine has claimed two third in class awards, hasnt been revved over 7000 and has the oil changed every 50 miles!

£875 ono, engine rebuild alone came to just over a grand!! Can be heard running if required - upto the next few days until we start to take things out of the car!!


Next up is a Quaife F13 straight cut, close ratio gear box. All working perfectly ok. Has covered less than 1000 miles.
Will also supply GSI shafts for the complete kit. The shafts have been refurbished in 2011 and covered around 200 miles.

I would be looking for £1100 ono.

Will accept sensible offers on these items but nothing stupid. Still in car so will can be heard working. Again only selling as upgrade, currently in talks to purchase new engine and gearbox

E-mail: liambutler_uk@yahoo.co.uk
Phone: 07921 707628

Aid/Cesaro
25-06-13, 10:49 PM
How much for Atb if you can split?

Peredur
25-06-13, 11:20 PM
How much for cluster and CWP if you split?

Liam_Nova
26-06-13, 06:53 PM
Bump

Liam_Nova
27-06-13, 09:37 AM
Diff spoken for if anyone interested in gearbox

SimonTW
27-06-13, 10:02 AM
What power did the engine make on the rolling road? Do you have receipts for all the work? Also can you drop me a couple of pics via pm or post on here. Cheers.

Liam_Nova
27-06-13, 07:38 PM
http://postimg.org/image/3kys22nwh/The engine made 100 BHP at the wheels on the rollers.
I am sure we have reciepts for the work done, the Cam cam with the car and the valve springs and carbs and manifolds came off our previous engine

http://postimg.org/image/3kys22nwh/http://s16.postimg.org/3kys22nwh/551895_454494907917114_619672049_n.jpg (http://postimg.org/image/3kys22nwh/)

Liam_Nova
28-06-13, 10:48 PM
Bump again!!
We are about to put our deposit down on our new engine and box combo, so these are definetly for sale and can be with you within the next week or so.

Anyone interested in the box or engine please contact me. You wont find a cheaper F13 box, it has been reliable for us and we are only upgrading as we need a F20 to go with our new engine.

Liam_Nova
30-06-13, 11:33 PM
Bump

Liam_Nova
01-07-13, 10:03 AM
Please see updated prices on items

Also for anybody interested in the engine, we do have a build receipt for the work we had done!

Liam_Nova
03-07-13, 09:40 PM
Bump

zeifer33
04-07-13, 07:25 AM
You have a email:thumb:

Liam_Nova
04-07-13, 08:07 PM
Hi all.
Will take. Sensible offers on engine.

Liam_Nova
06-07-13, 04:22 PM
Will take £800 on the engine and will include the paddle clutch as well as everything else!
Also £1000 for the gearbox, casing and shafts!

Liam_Nova
08-07-13, 07:42 PM
Now on ebay

Liam_Nova
13-07-13, 07:51 PM
Now on ebay with pictures:

Engine: http://www.ebay.co.uk/itm/271236014107?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

Gearbox: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=271236012910

Working on getting everything out of the car now