PDA

View Full Version : Should i admit defeat?



Anonymous
13-08-00, 12:08 PM
I have been battling with my new number paltes for the past two weeks, when i get some free time. The back one fine! But the front just always seems to fall off.

The problem is that i dont want to screw it on, cos water will get into the number plate and make it look dodgy. Friends say use wax, but it still got in on another mates number plate. So is there anything that i can do to make it stick and "STAY ON!"

I have tried some famy stick tape that specicially made for number plates.

Tried sealent

Should i admit defeat and drill and screw them on, or has anybody got any ideas?

Cheers people.


Davo

Anonymous
13-08-00, 12:10 PM
by wax wax i mean drilling the holes and coating the hole with wax

Anonymous
13-08-00, 01:19 PM
Can't you seal the hole with some glue or something?

Anonymous
13-08-00, 03:14 PM
Coating the holes with clear lacquer is the !!!!!

Anonymous
14-08-00, 08:46 AM
Don't drill'um, have a look in a hardware place like B&Q and ask what they think will do th job.

Anonymous
14-08-00, 06:28 PM
when u used the sealent did u scuff up the 2 surfaces to be glued? coz if u didnt it wont stick

Anonymous
16-08-00, 01:05 PM
Yo, yeah, clear or white silicone sealer used in kithans and the likes works treats with any sorta whole or gap, and its the most water proof thing known to man. Drill it, paint the screw heads whatever colour is surrounding em, and then just use a bit of clear silicone sealer for it. Its brill stuff.

cheers