PDA

View Full Version : R1 carbs, wiring up dizzy help please



simbaroo86
17-06-13, 07:35 PM
Hi guys,

I have recently put a redtop in my beloved nova and have stuck a set R1 carbs on :d bit I am stuck on the wiring I've got to a point where I've wired up the coil that gets warm so I guess that means it's working but there are two wires on the dizzy which im unsure of I think I've got one right Black yellow but the other Green Blue I'm stuck it seems to be live but not sure if it should be please help I'm dying to get this car on road :confused:

skud52
18-06-13, 05:27 PM
If its getting warn then i'd say you have run an earth to it and shouldnt have, the coil should have power to it 1 side and rev counter the other. The module should have an earth to it, 3 wires to the hall sensor on the dizzy and a ignition i think, the other wire going to it is left from what i remember

skud52
18-06-13, 05:30 PM
clicky! (http://www.pngclub.com/forum/showthread.php?179237-C20XE-H-amp-H-igngition-wiring)

I asked the question when i was doing mine and found the reply post very helpful!