PDA

View Full Version : Breaking Corsa B track car with C20xe



benton101
13-06-13, 02:42 PM
C20xe engine and running gear no wirring loom, 10mm performance leads, fully rebuilt bottom end and has only been run in on standard intake manifold, cavi shafts and hubs machined to fit with new bearings, short shifter on f20 gearbox (good condition, no knocks or crunches. estimated 200bhp (maybe more) £500, can inlcude mocal oil cooler with pipe work and thermostat'd sandwhich plate for extra £120

Hyabusa throttle bodies 48mm tapered to 45mm with dta ecu and brand new dta wiring loom to fit straight onto and c20xe and fuel regulator £1200. these are currently running on the engine so everthing there to get them going, would make a deal if someone wanted both engine and throttle bodies
i have pictures of the engine in situ if required, excellant condition and runs amazing.

piper camshafts (cant remember the number but can get more details when im home next week) £150

BTB 4 branch manifold and 3" scorpian exhaust (cat back) with home made decat pipe, fully heat wrapped to the back box £300

8 gallon lightweight fuel tank (aluminium) with uprated high pressure fuel pump with lots of hoses and fittings as not fitted but everything ther to fit it £200

koni dampening adjustable shocks all round, not height adjustable with 60mm lowering springs, £200

all prices negotiable and will discount any multi buys, all parts are still on car and im currently away with work but i will answer any questions and queries http://www.corsasport.co.uk/board/images/smile/smile.gif

will post certain things at buyers expense

Will F
13-06-13, 09:44 PM
Pics of exhaust please!

benton101
14-06-13, 08:28 AM
iv been sent away with work mate i should be back next week so il get them then. i have pictures of the Wrapped BTB manifold on my phone. PM me your email adress mate and i will send it through to you

Will F
14-06-13, 09:18 AM
Pm sent

8valve-craig
14-06-13, 09:32 AM
Interested in the fuel setup pending pics and spec.

benton101
14-06-13, 04:57 PM
Interested in the fuel setup pending pics and spec.

as in the fuel tank mate?

benton101
16-06-13, 10:43 AM
TTT all prices are negotiable

8valve-craig
16-06-13, 11:34 AM
as in the fuel tank mate?

8 gallon lightweight fuel tank (aluminium) with uprated high pressure fuel
pump with lots of hoses and fittings as not fitted but everything ther to fit it
£200

benton101
16-06-13, 02:52 PM
iv got a couple guys after it but as said above im away with work (home on thursday) and il get all the pictures then for everyone :)