external wastegate

[mcgee.m]

hi all can eneyone help me I'm runing a external wastegate but not sure how to run the boost hoses and can i still run this on the standard let loom

[Jon_nova1]

yes and the vacuum that went to the original actuator, feed that to the wastegate

[mcgee.m]

I have two outlets on the waste gate

[Jon_nova1]

Yes you only use one, connect the inlet closest to the port holes, when positive pressure is put down the vacuum it will open the wastegate, the other is used if you have a boost controller

[mcgee.m]

Ok so from the amel valve wot vac hose goes to the wastgate as one goes to recirculation valve and one to actuator

[mcgee.m]

Sorry didn't won't to ask that do I just cap off the recirculation valve