x16xe immob and vss

[Curtoise]

Right I bought an engine advertised as a c16xe. Fitted it and it turns out its a x16xe (brilliant)
So on the loom I have no spare plugs or wires for the immob stuff. Or for the vss ?! My ecu plugs are red and white...

Also I have heard that if the ecu is super chipped it removed immob? But it probably isn't even super chipped.

Thanks for any help

[chrisd1986]

from what ive heard you cant removed the immob from the ecu but here is how to wire in the vss and transponder pic up into the loom
http://i1202.photobucket.com/albums/bb368/chris_d_1986/untitled_zps06bc294e.jpg
also if you havnt got the chip or ring and it wont start you have to buy them and a new ecu aswell

[johnd]

it the 9 pin plug that you use to wire in the vvs and immobliser. you can remove/buypass the immobliser in the ecu as I have mine done

[Curtoise]

do you send it off for it to be removed? and thankyou so its in that 9 pin plug.