PDA

View Full Version : MK2 Nova Hatch Project



nath2905
27-04-13, 07:09 PM
i always wanted a nova even before i brought my corsa, but at the time there was none about in my price range, then a few months back at work next door brought this one.. and i knew he would never do it as it would cost him to much so i end up with it,
it looks a bit rough but now its stripped it looks much better, i have a new drivers wing, lower door repair panel for one side the other shall have a repair panel made from sheet metal as i cant get the other side, i have a arch repair panel,
it also needed a screen which i have sourced too,
not sure how far i am going with it yet, or what colour, as if it goes back red its a night mare look after, so i have had a few idea off people like dark purple or brown,
as the photos show the floor is good, but i havent started bashing at it yet, the archs look ok two have had plates one is terrible but the other is not too bad, thats alls i can think of for now, ideas and thoughts welcome :)
and theres the corsa at the bottom :thumb:

http://imageshack.us/a/img706/3576/34202608.jpg
http://imageshack.us/a/img689/1506/37086385.jpg
http://imageshack.us/a/img703/7260/70264582.jpg
http://imageshack.us/a/img707/8754/74994726.jpg
http://imageshack.us/a/img547/6717/21986044.jpg
http://imageshack.us/a/img571/6963/54876143.jpg
http://imageshack.us/a/img211/5431/40644000.jpg
http://imageshack.us/a/img803/5330/65736546.jpg
http://imageshack.us/a/img705/3720/93877961.jpg
http://imageshack.us/a/img153/2747/36406929.jpg
http://imageshack.us/a/img809/4189/72183008.jpg

nath2905
27-04-13, 07:09 PM
http://imageshack.us/a/img35/659/86490068.jpg
http://imageshack.us/a/img823/4781/75438219.jpg
http://imageshack.us/a/img96/8908/72228448.jpg
http://imageshack.us/a/img59/7408/42184678.jpg

http://farm9.staticflickr.com/8079/8373821470_dda58d2b45_z.jpg

Tim Harpley
28-04-13, 09:34 PM
Nova looks fixable, love your corsa colour really suits it :cool:. Purple could look good, good luck with the build :thumb:.

nath2905
27-07-13, 05:25 PM
http://farm4.staticflickr.com/3797/9378848164_d1cb005b05.jpg
http://farm4.staticflickr.com/3766/9378846608_b048ccc3f8.jpg
http://farm6.staticflickr.com/5473/9376062773_38591f5222.jpg
http://farm4.staticflickr.com/3703/9376061387_406ceb8ea4.jpg
http://farm6.staticflickr.com/5544/9376060129_107898dc9d.jpg
http://farm3.staticflickr.com/2862/9376058783_78429d2606.jpg
http://farm6.staticflickr.com/5483/9378836326_89465a6d2f.jpg
http://farm4.staticflickr.com/3834/9376051899_020d74ee18.jpg
http://farm4.staticflickr.com/3834/9376051899_020d74ee18.jpg
http://farm4.staticflickr.com/3713/9378829268_d0a7e54ea4.jpg
http://farm4.staticflickr.com/3689/9376044859_1c62192154.jpg
http://farm8.staticflickr.com/7291/9376043287_22b5413482.jpg
http://farm6.staticflickr.com/5486/9376038887_a0d3681507.jpg
http://farm3.staticflickr.com/2887/9376037515_ab0fe97135.jpg


that is last weekends and todays work done on it, looks better in bits lol
a few more holes found, like in the front drivers arch that one is huge

nath2905
27-07-13, 05:25 PM
http://farm4.staticflickr.com/3789/9378819410_b433210c66.jpg
http://farm8.staticflickr.com/7388/9378816554_1bea775f26.jpg
http://farm6.staticflickr.com/5505/9378815318_b3bcf4af56.jpg
http://farm8.staticflickr.com/7406/9375990185_c90dfb3f85.jpg

nath2905
02-09-13, 07:39 PM
http://farm8.staticflickr.com/7357/9582387537_65a942d172.jpg
http://farm4.staticflickr.com/3733/9585184960_60a76069fa.jpg
http://farm4.staticflickr.com/3724/9585179060_b31ab5d624.jpg
http://farm8.staticflickr.com/7410/9585180916_725d2fc691.jpg

http://farm6.staticflickr.com/5515/9582425733_8ae95bb249.jpg
http://farm4.staticflickr.com/3804/9585218112_717db3b6d2.jpg
http://farm8.staticflickr.com/7442/9582427533_8c2ecb0f34.jpg

http://farm4.staticflickr.com/3826/9585220104_aedd0b91a0.jpg
http://farm3.staticflickr.com/2869/9585212472_5d0ec55800.jpg
http://farm8.staticflickr.com/7437/9582433155_39f9670774.jpg

http://farm8.staticflickr.com/7288/9585208504_4762a7bf5d.jpg
http://farm6.staticflickr.com/5538/9582383697_bba5006c19.jpg
http://farm8.staticflickr.com/7458/9582379469_88a4dd842c.jpg


how it sits today http://farm3.staticflickr.com/2851/9585174678_b94ae327ba.jpg

nath2905
06-11-13, 09:29 PM
PART 4
anything black is just to stop the rust ... as its damp in work shop http://farm3.staticflickr.com/2890/10446330133_e0a8a48c51.jpg
http://farm3.staticflickr.com/2868/10446357253_365e0dce96.jpg
http://farm4.staticflickr.com/3696/10446173236_7c0d0ccd30.jpg
http://farm4.staticflickr.com/3833/10446216025_10652d63fd.jpg
http://farm4.staticflickr.com/3775/10446219825_59bb1f0329.jpg
http://farm4.staticflickr.com/3748/10446195746_7be99569b3.jpg
http://farm8.staticflickr.com/7369/10446194304_f49ccebfdd.jpg
http://farm6.staticflickr.com/5545/10446237335_7f3d862bd0.jpg
http://farm6.staticflickr.com/5496/10446257855_9c3437e182.jpg
http://farm6.staticflickr.com/5546/10446266595_411d9dd3f4.jpg
http://farm6.staticflickr.com/5479/10446420983_b2a84a64bc.jpg
http://farm4.staticflickr.com/3667/10446424873_84928d7cf4.jpg
http://farm6.staticflickr.com/5481/10446250816_ae1cbb2411.jpg
:)

Iain
06-11-13, 11:29 PM
Surprised you're not putting the whole repair panel on with the nasties that usually hide behind the rear arches.

nova_niek
07-11-13, 11:51 AM
Wow! You don't hang about. Seeing a lot of improvement throughout the pics. Keep it up! :thumb:

nath2905
08-11-13, 09:10 AM
Cheers... and didn't put it all in as only the bottom corner was rotten the rest is solid

jafanan
08-11-13, 04:09 PM
good progress

keep it up!

Rickyb
09-11-13, 10:16 PM
Looking good reminds me so much of the start of my project. Keep at it bud

nath2905
10-11-13, 10:59 AM
cheers guys :)

nath2905
13-11-13, 07:11 PM
http://farm6.staticflickr.com/5545/10446150224_b1899a1084.jpg
http://farm3.staticflickr.com/2826/10446145826_b8e2199e7c.jpg
http://farm4.staticflickr.com/3827/10446321493_dd737bc040.jpg
http://farm6.staticflickr.com/5531/10446163736_2e726b13e8.jpg
http://farm4.staticflickr.com/3742/10446127794_708cfa67a7.jpg
http://farm8.staticflickr.com/7394/10446312443_4b6c13b4fa.jpg
http://farm8.staticflickr.com/7364/10805034923_1931e4e7ae.jpg
http://farm4.staticflickr.com/3751/10804773326_9b30435123.jpg
http://farm8.staticflickr.com/7460/10804911094_072b93d615.jpg
http://farm3.staticflickr.com/2882/10804766535_e43a95e05c.jpg
http://farm3.staticflickr.com/2888/10804749816_a2ee38a110.jpg
http://farm6.staticflickr.com/5547/10804990933_e725b5bbf5.jpg
http://farm4.staticflickr.com/3712/10804974653_47fbfe9161.jpg
http://farm4.staticflickr.com/3690/10804963103_6e5e21d99b.jpg
http://farm4.staticflickr.com/3805/10804710505_3cde27efe4.jpg


thats up to date... thats how it stands right now

Rickyb
18-11-13, 02:29 PM
Very muchos likes.

Richy12
18-11-13, 03:48 PM
1 thing is for sure, you dont hang about. great work

Benn
18-11-13, 04:21 PM
Gotta say, if your leaving it on the stands, id put them on the chassis rails. As they will bend the sill (looks like the front one is)
Looks like a nice bit a build going on... Shame you didn't leave the under side red...

nath2905
28-12-13, 06:01 PM
right people....things have changed for the worst... this has to go...it is now back on standard suspension and and wheels... the floor is painted along with the archs (purple)... pictures will be added if needed...it has all interior bits with it and looms etc... just no engine as i planned to change it to a bigger one... viewing is welcome... im in stoke on trent.... offers please i have a rough figure this owes me quiet a bit, i arnt expecting it all back just a bit of something