FAO-Ste_Sa

[jim sri]

putting an LET into a nova, the sri engine loom has been separated from the main car loom already. what wires on a late cav turbo loom need connecting to what wires on the nova loom?(the cav is an m plate and the nova k plate)
cheers

[Lee H]

Am I allowed to answer :roll:

This is for GSi, SRi may be different.

I used the original Nova loom for the oil pressure sensor, alternator and starter motor. The black wire on the Nova multiplug (near bulkhead) needs connecting to the single black wire and plug on the turbo loom just after the injector rail. The red/blue needs connecting to the red/blue on the turbo loom (fuel pump), the green needs connecting to the green (rev counter), the brown/blue to brown/blue (ECU light) and blue connects to blue (temp guage) The red on the Nova multiplug is no longer used as the turbo loom connects directly to battery.

[Ste_Nova]

you will have to work it out for urself... there is no multi plug on the sri.... and i have no idea what you have done with the wires.... less colours are right... so just work it out

[Lee H]

No multiplug :o

I now see why people struggle a lot more with the wiring when converting Sri's.