lock/unlock output wire connections

[nova_pipi]

hi all I'm wondering where can I connect the lock and unlock output wires in fitting an alarm to a corsa b along with central door locking wires please? I already have central locking if this makes a difference.
thanks
Phil

[meritlover]

i cant remember if the Corsa B is + unlock +lock.

ie you ground each wire to earth to make it do each function.

have a look at your wiring diagram. If it is how i remember, then its easy.

[nova_pipi]

I was trying to have a look at the wiring diagram but I couldn't get my head around what to do :s I've done a bit of research and it seems you have to earth the lock/unlock on the solenoids, thanks

[Brasso93]

Im also having the same problem ive wired my alarm into the right cables just behind the drivers kick panel and ran both lock and unlock into the earth for the alarm system but when I press the lock or unlock on the fob it just clicks and the control box and nothing at the doors :/ anyone help ??

[meritlover]

what have you checked so far?

[Brasso93]

I have diagrams for positive trigger, negative trigger and postive/negative with actuators followed then all and no luck have also tried earthing both lock and unlock