Digi dash Speedo wrong speed

[paul burney]

I have two digi dashes one old style and a new style one but I only have the one transducer when I'm in first gear I'm doing 32mph at 3000 rpm I don't think this is wight do I have the right transducer or are my clocks wired wong?

Cheers

[brainsnova]

Try flicking the red switch On the very top off the dash between the front and back

[paul burney]

Do the older style clocks have a different transender to the new ones or do the both run of the same one.

[brainsnova]

There's 2 types ah and ak and I'm unsure which goes with which

[meritlover]

Maybe your diff or wheel size is wrong

[paul burney]

Can u make a ah fit a ak dash and vice versa

[meritlover]

Yes it will fit but won't show the correct speed.

[paul burney]

Can you get it to show the correct sped or do u need the correct transender ah/ak

[meritlover]

you can get it to show the correct speed by finding a suitably paired transducer and dash.

http://www.cavmk3oc.com/forum/download/file.php?id=3085&sid=eae3b2f9d68a1c49f6c0f31d6326365a&mode=view

[Spudly]

Have you tried flicking the red switch on the top, this is to allow the use of more than just one transducer, try that and test again before you start swapping them about!

[paul burney]

I will that will be my first check this week I hope that's it easy fix lol thanks for all the advise guys it's a big help

[brainsnova]

If it turns out the switch never worked then a guy on M.i.g made a box to change the pulses on the transducer

[MJS]

i had my digi dash reading 257mph when i was doing about 50
I believe the garage that done my conversion changed the transducer and then it was spot on
I've now in process of building another nova and hope my transducer matches my clocks.