View Full Version : removing carbon door cards that have been tiger sealed
Hi how the best way to remove carbon door cadds that have been tiger sealed but dont want to damge the carbon door card
Long Stanley knife to cut the tiger seal
8valve-craig
25-02-13, 02:20 PM
Serrated long blade.
Smooth blades are no good for tiger-seal, you will end up trying to saw, then probably hurt yourself.
http://www.ebay.co.uk/itm/10-18MM-SERRATED-NON-SEGMENTED-BLADES-IN-PLASTIC-TUBE-NEW-/271095334526?pt=UK_Cars_Parts_Vehicles_Other_Vehic le_Parts_Accessories_ET&hash=item3f1e8a867e
8valve-craig
25-02-13, 02:21 PM
Or instead of ordering and waiting for them to arrive you could just use a steak knife.
Cheap serrated knife from Asda :)
meritlover
25-02-13, 04:29 PM
leave the door in the sea for a couple of years, the metal will corrode away leaving the carbon fibre panel. Then simply pick the sealer off the back.
brainsnova
25-02-13, 05:10 PM
I used a sharp wall paper scraper to get some heavily tigersealed transit sport rear arches off at the scrappies but it was all I had with me but it worked
maybe a heatgun to soften the tiger seal
as the cards are carbon i d use a hair dryer much safer if you can lift the card spray tar remover on the the tiger seal
8valve-craig
26-02-13, 12:33 AM
Serrated knife, sawing action, simple.
Heating it will no nothing.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.