PDA

View Full Version : C20let forged bottom end breaking .



stevec20let
14-02-13, 10:08 AM
Selling my complete bottom end which has had the following carried out.
Early xe block which had covered very low miles to begin with. All work has been carried out by steve Milton. The block has had under piston oil squirters fitted,been honed to the standard size of 86mm, decked, oil return fitted and fully cleaned. £200
Early type xe crank which has been fully cleaned and polished, again all standard size £70,posted Arp main studs fitted but then undone £70 Z20let oil pump with modified pickup pipe, £110 posted steel rods, 86mm Mahle pistons which have been machined for lower compression.SOLD
All gaskets and bearing have been bought from Autovaux
Oil pump seal,pickup pipe, rear main seal.
8valve sump gasket £15posted
Genuine vauxhall early waterpump. £30 posted
Also has a Dewismotorsport baffled sump to prevent oil surge at high speed corners £65 posted
Any question feel free to contact me on 07585700377 01276527039
http://i1008.photobucket.com/albums/af201/stevejordan/39112590-033E-4B94-9D7F-83FE8481A85A-8005-000008410EAAFACB_zpsc56d3b0a.jpg
http://i1008.photobucket.com/albums/af201/stevejordan/C81B0F28-B114-469F-A4A5-6C3322B3A7EE-390-000000BC21FD7FCE_zps5441288c.jpg
http://i1008.photobucket.com/albums/af201/stevejordan/D26C1DB6-B4C5-44F2-94D5-3DFECD1D9C20-8005-000008410840B93D_zps71c9b6cd.jpg

Steve.