Aftermarket ECU wiring

[stt]

What grommets do people use when fitting their looms through the bulkhead?

i've found This (http://polevolt.co.uk/acatalog/Grommets.html) but its not really big enough as i dont think that the ecu plug - or alternatively all the other plugs will pass through the 29mm gap?

[Dave A]

Get yourself down to B&Q in the electrical section they do bulkhead glands. These bolt through and have a rubber ring inside that seals onto the wiring, perfect for this job.

[Southie]

Try giving these guys a call CLICKYME (http://www.grommets.co.uk/sleeved-grommets/)

Edit: just noticed they've a £30 minimum order, you could try saying you've got a big order to come there way if the quality is good enough and your wanting a sample of there products lol

[meritlover]

have a walk around the scrappies and look at other grommets/bungs for the same puropse. You can use the OE grommet if you pass the wires through it first and make up the connectors last then the engine plugs will pull through into the car (if) you ever need to remove it. Usually there is little reason to remove the loom once its in and working.

[MARTIN KELSON]

You can get these from Demon Tweeks
http://www.demon-tweeks.co.uk/motorsport/hose-fitting-accessories/seals-it-firewall-grommet-seals

Various sizes & splits of the loom is already in situ.

Quite pricey though!!