PDA

View Full Version : Nova GTE 2.0 16V



zeifer33
28-11-12, 01:16 PM
Hi, I come back with another project. Now with a big block nova. The current progress of the car its over here:

http://www.comunidadcorsa.es/modules.php?name=Forums&file=viewtopic&t=23539

But i go explain all the project for you.(Sorry its a spanish Forum, but you can see the pics:d)

http://s3.subirimagenes.com:81/fotos/previo/thump_760429620120317153250.jpg (http://www.subirimagenes.com/fotos-20120317153250-7604296.html)
http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_7604305img20120328wa0000.jpg (http://www.subirimagenes.com/fondosycapturas-img20120328wa0000-7604305.html)

The assembly of the car is very bad and the idea for these year its try we can do with the actual potential of the car, never we have an XE nova to ride or see or something similar. So, To begin we will see that this car is made.:thumb:

NOV4_SPORT
28-11-12, 04:39 PM
Looks very cool mate, I will be looking forward to your progress

Iain

zeifer33
29-11-12, 09:14 AM
Thx, slow progress but always a little bit, jajaja

zeifer33
29-11-12, 01:19 PM
Ok, the first thing to do its check the engine and car loom. The conexions are scary and a few things dont work well.

All the innecesary wires are out of the car.

http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_7615469img20120328wa0002.jpg (http://www.subirimagenes.com/fondosycapturas-img20120328wa0002-7615469.html)

And a important thing, change the ECU for a new place into the car.

http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_7615471img20120328wa0005.jpg (http://www.subirimagenes.com/fondosycapturas-img20120328wa0005-7615471.html)
http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_7615473img20120328wa0006.jpg (http://www.subirimagenes.com/fondosycapturas-img20120328wa0006-7615473.html)

http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_7615475img20120328wa0011.jpg (http://www.subirimagenes.com/fondosycapturas-img20120328wa0011-7615475.html)

I dont have the previous pic, but into the stereo place we have 3 gauges(water temp, Amp and oil presure) I think that the standar dash its perfect and its better remove these clocks.

http://s2.subirimagenes.com/fondosycapturas/previo/thump_7629920img20120417wa0001.jpg (http://www.subirimagenes.com/fondosycapturas-img20120417wa0001-7629920.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_7629925img20120417wa0000.jpg (http://www.subirimagenes.com/fondosycapturas-img20120417wa0000-7629925.html)

And well, al for the moment.Thanks for watching :d

zeifer33
04-12-12, 10:35 AM
For the moment, its a standard XE with ecopipe and exhaust system.

http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_7646050img20120424wa0005.jpg (http://www.subirimagenes.com/fondosycapturas-img20120424wa0005-7646050.html)

http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_7646055img20120424wa0004.jpg (http://www.subirimagenes.com/fondosycapturas-img20120424wa0004-7646055.html) :wink:

A few extinguiser tubes are broken.

http://s2.subirimagenes.com/fondosycapturas/previo/thump_7652277img20120425wa0003.jpg (http://www.subirimagenes.com/fondosycapturas-img20120425wa0003-7652277.html)

http://s3.subirimagenes.com:81/fotos/previo/thump_7652300img20120425wa0004.jpg (http://www.subirimagenes.com/fotos-img20120425wa0004-7652300.html)


For the first race in my life we go with the car near as stock, we can try how we can do with these car.:d

zeifer33
07-12-12, 01:37 PM
The engine loom its nearly to ready, and the ecopipe adaptator its done.

http://img407.imageshack.us/img407/2977/img20120428wa0000.jpg (http://imageshack.us/photo/my-images/407/img20120428wa0000.jpg/)


http://img96.imageshack.us/img96/2748/20120427190404.jpg (http://imageshack.us/photo/my-images/96/20120427190404.jpg/)

http://img88.imageshack.us/img88/3613/20120427190425.jpg (http://imageshack.us/photo/my-images/88/20120427190425.jpg/)

http://img254.imageshack.us/img254/9355/20120430233628.jpg (http://imageshack.us/photo/my-images/254/20120430233628.jpg/)

http://img4.imageshack.us/img4/4188/20120430233348.jpg (http://imageshack.us/photo/my-images/4/20120430233348.jpg/)

http://img513.imageshack.us/img513/113/20120430233327.jpg (http://imageshack.us/photo/my-images/513/20120430233327.jpg/)

http://img3.imageshack.us/img3/2300/20120430233427.jpg (http://imageshack.us/photo/my-images/3/20120430233427.jpg/)

http://img443.imageshack.us/img443/251/20120430233513o.jpg (http://imageshack.us/photo/my-images/443/20120430233513o.jpg/)
http://img337.imageshack.us/img337/1226/20120427194700.jpg (http://imageshack.us/photo/my-images/337/20120427194700.jpg/)

http://img189.imageshack.us/img189/5950/20120427194715.jpg (http://imageshack.us/photo/my-images/189/20120427194715.jpg/)

To finish, the interior its ready now to race.

http://img443.imageshack.us/img443/5337/20120430233544.jpg (http://imageshack.us/photo/my-images/443/20120430233544.jpg/)

http://img337.imageshack.us/img337/6692/20120430233611.jpg (http://imageshack.us/photo/my-images/337/20120430233611.jpg/)

zeifer33
10-12-12, 02:27 PM
Well, all ok for the first event to the car. Its necessary make several changes into the car, but the results are fantastics. We finish 24 of 46, and we star into the last position.

http://img692.imageshack.us/img692/7687/img061fl.jpg (http://imageshack.us/photo/my-images/692/img061fl.jpg/)
http://img819.imageshack.us/img819/1570/img063xr.jpg (http://imageshack.us/photo/my-images/819/img063xr.jpg/)
http://img205.imageshack.us/img205/9773/img4019g.jpg (http://imageshack.us/photo/my-images/205/img4019g.jpg/)
http://img225.imageshack.us/img225/4596/img4578y.jpg (http://imageshack.us/photo/my-images/225/img4578y.jpg/)
http://img337.imageshack.us/img337/996/img6765on.jpg (http://imageshack.us/photo/my-images/337/img6765on.jpg/)
http://img812.imageshack.us/img812/3772/img4428o.jpg (http://imageshack.us/photo/my-images/812/img4428o.jpg/)
http://img641.imageshack.us/img641/6726/vsubidasantamariadeoia2.jpg (http://imageshack.us/photo/my-images/641/vsubidasantamariadeoia2.jpg/)

A little vid. You can see more into my Youtube chanel.

http://youtu.be/c6TFcg9QNMU

Graeme
10-12-12, 03:05 PM
Link doesn't work for me mate

simonm
10-12-12, 03:10 PM
Pics look good looks like a good track/road there

Benn
10-12-12, 05:27 PM
Full on drift pic. Nice op lock...

http://img641.imageshack.us/img641/6726/vsubidasantamariadeoia2.jpg

zeifer33
10-12-12, 06:23 PM
Thx guys, try with these.

http://m.youtube.com/watch?v=FxAkvdA_2Lk

andyredtop83
10-12-12, 07:29 PM
Good work mate, keep it up, i know the GTE was called the GSi in europe but it still looks weird to me seeing a GSi badge on a GTE grill lol

zeifer33
10-12-12, 08:17 PM
Good work mate, keep it up, i know the GTE was called the GSi in europe but it still looks weird to me seeing a GSi badge on a GTE grill lol

Jajajaja more or less, its a hybrid.jajajaja

zeifer33
12-12-12, 08:13 AM
Well, its time to prepare the next event. I bought a few thing to modifie the car, the firts thing tis improve the handling, quit the spacers, reduce the weight, and a few more things

http://s2.subirimagenes.com/otros/previo/thump_772661120120527133200.jpg (http://www.subirimagenes.com/otros-20120527133200-7726611.html)

http://s2.subirimagenes.com/fotos/previo/thump_772662629052010100.jpg (http://www.subirimagenes.com/fotos-29052010100-7726626.html)

http://s3.subirimagenes.com:81/fotos/previo/thump_772662829052010095.jpg (http://www.subirimagenes.com/fotos-29052010095-7726628.html)

http://s3.subirimagenes.com:81/fotos/previo/thump_772663029052010094.jpg (http://www.subirimagenes.com/fotos-29052010094-7726630.html)

zeifer33
15-12-12, 10:18 AM
Ok, no much changes into the car these days, we only change the suspension, wheels and the strut brace.

http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_7866697img163.jpg (http://www.subirimagenes.com/fondosycapturas-img163-7866697.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_7866702img162.jpg (http://www.subirimagenes.com/fondosycapturas-img162-7866702.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_7866704img164.jpg (http://www.subirimagenes.com/fondosycapturas-img164-7866704.html)

http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_7866706img165.jpg (http://www.subirimagenes.com/fondosycapturas-img165-7866706.html)

http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_7761004img129.jpg (http://www.subirimagenes.com/fondosycapturas-img129-7761004.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_7761010img127.jpg (http://www.subirimagenes.com/fondosycapturas-img127-7761010.html)

http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_7761012img130.jpg (http://www.subirimagenes.com/fondosycapturas-img130-7761012.html)

And its all for now.
http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_7792493img140.jpg (http://www.subirimagenes.com/fondosycapturas-img140-7792493.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_7792502img147.jpg (http://www.subirimagenes.com/fondosycapturas-img147-7792502.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_7792504img142.jpg (http://www.subirimagenes.com/fondosycapturas-img142-7792504.html)

http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_7792506img143.jpg (http://www.subirimagenes.com/fondosycapturas-img143-7792506.html)

http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_7792509img145.jpg (http://www.subirimagenes.com/fondosycapturas-img145-7792509.html)

masseyk@deeside.ac.uk
15-12-12, 10:37 AM
Looks really good with the colour scheme and the stickers, keep the pictures coming.

Keith

zeifer33
17-12-12, 09:04 AM
Thx mate, the second event of the season is comming. new updates and problems and pics. jajajaja

zeifer33
26-12-12, 08:23 AM
Well, to update the car. We star to save some weight, and made the car a race car.


http://s2.subirimagenes.com/fotos/previo/thump_8056691img324.jpg (http://www.subirimagenes.com/fotos-img324-8056691.html)
http://imageshack.us/a/img29/604/img323g.jpg (http://imageshack.us/photo/my-images/29/img323g.jpg/)
http://s2.subirimagenes.com/fotos/previo/thump_8056698img325.jpg (http://www.subirimagenes.com/fotos-img325-8056698.html)
http://imageshack.us/a/img51/118/img326b.jpg (http://imageshack.us/photo/my-images/51/img326b.jpg/)
http://imageshack.us/a/img24/852/img327fy.jpg (http://imageshack.us/photo/my-images/24/img327fy.jpg/)

I bought a few things to improve the car, for example, after bought them, we discover that the previous owner use a modifie exhaust manyfold to chop the standard XE manifold with a standard 16SE exhaust. Now we go replace the manifold for another a few better with a full custom exhaust system.


http://s2.subirimagenes.com/fotos/previo/thump_8076881img347.jpg (http://www.subirimagenes.com/fotos-img347-8076881.html)
http://s2.subirimagenes.com/fotos/previo/thump_8076894img345.jpg (http://www.subirimagenes.com/fotos-img345-8076894.html)
http://s2.subirimagenes.com/fotos/previo/thump_8076903img343.jpg (http://www.subirimagenes.com/fotos-img343-8076903.html)

And a two birthday present more.:thumb:

NOV4_SPORT
26-12-12, 09:40 AM
The nova is looking good David I really like the progress you are making with the car

Iain

Benn
26-12-12, 08:43 PM
Is that mounted to the seats mounts?

http://imageshack.us/a/img51/118/img326b.jpg

zeifer33
27-12-12, 08:34 AM
Thanks guys, we go start to repair the TPS, replace the rear strut brace, made a better spacers, choose the correct position for the octane swicht, reduce weight, made the seat mounts support, made a set of policarb windows, put the internal gearknob, and a few more things to prepare the car for the second events in these season.

To start, here is the policarb.

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8204744img20120411wa0000.jpg (http://www.subirimagenes.com/fondosycapturas-img20120411wa0000-8204744.html)

zeifer33
28-12-12, 01:53 PM
well, to start all no needed out.


http://s2.subirimagenes.com/fondosycapturas/previo/thump_8089270img20121027wa0004.jpg (http://www.subirimagenes.com/fondosycapturas-img20121027wa0004-8089270.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8089274img20121027wa0009.jpg (http://www.subirimagenes.com/fondosycapturas-img20121027wa0009-8089274.html)


http://s2.subirimagenes.com/fondosycapturas/previo/thump_8089281img20121027wa0016.jpg (http://www.subirimagenes.com/fondosycapturas-img20121027wa0016-8089281.html)

And we try firts with the rear window, the most symple i think. The result its very nice.
http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_8089278img20121027wa0017.jpg (http://www.subirimagenes.com/fondosycapturas-img20121027wa0017-8089278.html)

The standard gearstick its out, and all ready to put the cavalier ones.
http://s2.subirimagenes.com/fotos/previo/thump_8101016img367.jpg (http://www.subirimagenes.com/fotos-img367-8101016.html)

At the moment, thats its all:thumb:

zeifer33
02-01-13, 01:36 PM
The first windows are ready into the car, now its turn for the really important.


http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_8089262img20121027wa0008.jpg (http://www.subirimagenes.com/fondosycapturas-img20121027wa0008-8089262.html)

http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_8089268img20121027wa0007.jpg (http://www.subirimagenes.com/fondosycapturas-img20121027wa0007-8089268.html)

zeifer33
10-01-13, 10:43 AM
http://s2.subirimagenes.com/fotos/previo/thump_8100994img359.jpg (http://www.subirimagenes.com/fotos-img359-8100994.html)
http://s3.subirimagenes.com:81/fotos/previo/thump_8100998img363.jpg (http://www.subirimagenes.com/fotos-img363-8100998.html)
http://s2.subirimagenes.com/fotos/previo/thump_8101002img364.jpg (http://www.subirimagenes.com/fotos-img364-8101002.html)
New TPS swicht now fitted
http://s3.subirimagenes.com:81/fotos/previo/thump_8101005img365.jpg (http://www.subirimagenes.com/fotos-img365-8101005.html)
Internal gearstick ready
http://s2.subirimagenes.com/fotos/previo/thump_8101016img367.jpg (http://www.subirimagenes.com/fotos-img367-8101016.html)


http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_8116561img20121109wa0008.jpg (http://www.subirimagenes.com/fondosycapturas-img20121109wa0008-8116561.html)
http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_8116564img20121109wa0010.jpg (http://www.subirimagenes.com/fondosycapturas-img20121109wa0010-8116564.html)


http://s3.subirimagenes.com:81/fotos/previo/thump_8101020img369.jpg (http://www.subirimagenes.com/fotos-img369-8101020.html)
http://s3.subirimagenes.com:81/fotos/previo/thump_8101023img370.jpg (http://www.subirimagenes.com/fotos-img370-8101023.html)

[/URL]
A few holes for the cooling system.
[URL="http://www.subirimagenes.com/fotos-img372-8101039.html"]http://s3.subirimagenes.com:81/fotos/previo/thump_8101039img372.jpg (http://www.subirimagenes.com/fotos-img371-8101029.html)
The rear strut brace its now refitted into a better place.
http://s2.subirimagenes.com/fotos/previo/thump_8101042img368.jpg (http://www.subirimagenes.com/fotos-img368-8101042.html)

http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_8116569img20121109wa0009.jpg (http://www.subirimagenes.com/fondosycapturas-img20121109wa0009-8116569.html)
And the last window its fitted into her place.
http://s2.subirimagenes.com/fotos/previo/thump_8101043img362.jpg (http://www.subirimagenes.com/fotos-img362-8101043.html)
http://s3.subirimagenes.com:81/fotos/previo/thump_8101051img361.jpg (http://www.subirimagenes.com/fotos-img361-8101051.html)

OK, all for now:thumb:

zeifer33
23-01-13, 01:34 PM
Well, all ready to go at the exhaust garage for make a decent exhaust system. At the moment we running the car with a standard exhaust manifold with a chopped nova 1.6 union and a standard nova 1.6 system.lol


http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_8116567img20121110wa0000.jpg (http://www.subirimagenes.com/fondosycapturas-img20121110wa0000-8116567.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8116568img20121110wa0011.jpg (http://www.subirimagenes.com/fondosycapturas-img20121110wa0011-8116568.html)
http://s3.subirimagenes.com:81/fotos/previo/thump_8116570img395.jpg (http://www.subirimagenes.com/fotos-img395-8116570.html)
http://s3.subirimagenes.com:81/fotos/previo/thump_8116574img20121110wa0007.jpg (http://www.subirimagenes.com/fotos-img20121110wa0007-8116574.html)
http://s3.subirimagenes.com:81/fotos/previo/thump_8116576img390.jpg (http://www.subirimagenes.com/fotos-img390-8116576.html)

All for now, the last things are ready to go at the second event.:thumb:

zeifer33
31-01-13, 12:21 PM
The interior its ready,

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8133992img20121113wa0007.jpg (http://www.subirimagenes.com/fondosycapturas-img20121113wa0007-8133992.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8133994img20121113wa0008.jpg (http://www.subirimagenes.com/fondosycapturas-img20121113wa0008-8133994.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8133996img20121113wa0009.jpg (http://www.subirimagenes.com/fondosycapturas-img20121113wa0009-8133996.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8133998img20121113wa0003.jpg (http://www.subirimagenes.com/fondosycapturas-img20121113wa0003-8133998.html)
http://s3.subirimagenes.com:81/fondosycapturas/previo/thump_8134000img20121114wa0001.jpg (http://www.subirimagenes.com/fondosycapturas-img20121114wa0001-8134000.html)
New Sponsor´s logo.
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8134002img20121116wa0006.jpg (http://www.subirimagenes.com/fondosycapturas-img20121116wa0006-8134002.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8134003img20121116wa0002.jpg (http://www.subirimagenes.com/fondosycapturas-img20121116wa0002-8134003.html)
We made a policarb panel for the doors.
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8134004img20121119wa0006.jpg (http://www.subirimagenes.com/fondosycapturas-img20121119wa0006-8134004.html)

Oil cath tank.
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8138211img20121120wa0000.jpg (http://www.subirimagenes.com/fondosycapturas-img20121120wa0000-8138211.html)
http://s2.subirimagenes.com/fotos/previo/thump_8138212img20121120wa0001.jpg (http://www.subirimagenes.com/fotos-img20121120wa0001-8138212.html)
http://s2.subirimagenes.com/fotos/previo/thump_8138213img20121120wa0003.jpg (http://www.subirimagenes.com/fotos-img20121120wa0003-8138213.html)

And ready to start!!!
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8138885img20121122wa0005.jpg (http://www.subirimagenes.com/fondosycapturas-img20121122wa0005-8138885.html)

little vid to exhaust sound.

https://www.youtube.com/watch?v=dUyah_otPBI&feature=youtube_gdata_player

zeifer33
07-02-13, 01:54 PM
Well, second event with the car finished without problmes. 1º in my class and 8º overall, not bad for the second race with the car. For you a few pics and a little onboard(not the best)


http://www.youtube.com/watch?v=npDlLQBZDk0&feature=plcp

http://img826.imageshack.us/img826/7858/img8093p.jpg (http://imageshack.us/photo/my-images/826/img8093p.jpg/)
http://img526.imageshack.us/img526/318/img0308dw.jpg (http://imageshack.us/photo/my-images/526/img0308dw.jpg/)
http://img707.imageshack.us/img707/3812/img0406rg.jpg (http://imageshack.us/photo/my-images/707/img0406rg.jpg/)
http://img21.imageshack.us/img21/7217/img8295o.jpg (http://imageshack.us/photo/my-images/21/img8295o.jpg/)
http://img502.imageshack.us/img502/7264/img0523iq.jpg (http://imageshack.us/photo/my-images/502/img0523iq.jpg/)
http://img39.imageshack.us/img39/4573/img419a.jpg (http://imageshack.us/photo/my-images/39/img419a.jpg/)

Benn
07-02-13, 05:54 PM
Love that!^ Looks great out there. You dont hold back either, great video.

nova_niek
07-02-13, 08:16 PM
Braaaaap braaaaaaaaaaap :thumb::thumb::thumb:

nova_niek
07-02-13, 08:19 PM
The current progress of the car its over here:
http://www.comunidadcorsa.es/modules.php?name=Forums&file=viewtopic&t=23539

But i go explain all the project for you.(Sorry its a spanish Forum, but you can see the pics:d)


Sorry Zeifer, can't view the pics - need to log in. :confused:

zeifer33
08-02-13, 09:19 AM
Love that!^ Looks great out there. You dont hold back either, great video.

thx men, im trying to continue:thumb:

zeifer33
08-02-13, 09:26 AM
Sorry Zeifer, can't view the pics - need to log in. :confused:

ehhhhh, mmmmm. I dont know, i always enter with accountlol

But don’t worry, the thread it’s as the same level right now, the only change what happened these days it’s we striped the engine out to prepare the chassis for the 2013 season. We star at June in the 3º event.

I have a few more pics that i upload as soon as possible, not much time to work into the car at these moment.:thumb:

zeifer33
08-02-13, 11:07 AM
More info and vids in my youtube channel.

http://m.youtube.com/user/zeifer33

turbojolt
08-02-13, 11:29 AM
how did you flair out your rear arches?

zeifer33
08-02-13, 04:47 PM
how did you flair out your rear arches?

mmm, a well done job of the previus owner. For these season I try to repair these, jejejeje.

turbojolt
08-02-13, 04:58 PM
I like it mate, the car looks really purposeful and makes me want a gte kit on mine

zeifer33
11-02-13, 01:19 PM
Yes, i love the GTE style, well, i star to strip the car and i hope that these weekend the engine stay out.

I send the shocks to repair, one its totaly destroyed and its necessary replace all the parts.

We lost the damper adjustement into the repair but they are news again, i need to search a new suspension kit, ok these is the car right now, waiting for me. lol

http://s2.subirimagenes.com/fotos/previo/thump_8250634img497.jpg (http://www.subirimagenes.com/fotos-img497-8250634.html)
http://s2.subirimagenes.com/fotos/previo/thump_8250633img496.jpg (http://www.subirimagenes.com/fotos-img496-8250633.html)

zeifer33
18-02-13, 11:51 AM
Ok, little update the car is ready to go my mate´s home and star to work.

http://s2.subirimagenes.com/fotos/previo/thump_8306417img555.jpg (http://www.subirimagenes.com/fotos-img555-8306417.html)

zeifer33
22-02-13, 09:52 AM
New house for the nova waiting for the welder machine and proper workers, lol

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8314926img20130221wa0003.jpg (http://www.subirimagenes.com/fondosycapturas-img20130221wa0003-8314926.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8314934img20130221wa0009.jpg (http://www.subirimagenes.com/fondosycapturas-img20130221wa0009-8314934.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8314938img20130221wa0010.jpg (http://www.subirimagenes.com/fondosycapturas-img20130221wa0010-8314938.html)

We will begin shortly:thumb:

zeifer33
25-02-13, 02:32 PM
well, not much to update.

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8320727img20130223wa0001.jpg (http://www.subirimagenes.com/fondosycapturas-img20130223wa0001-8320727.html)

These stell plate displacing the steering rack, we dont know why but she´s into the car, the rest of the bulkhead insulator its out now, and a good cleaning to discover the shell under all the grease.lol

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8320731img20130223wa0000.jpg (http://www.subirimagenes.com/fondosycapturas-img20130223wa0000-8320731.html)


http://s2.subirimagenes.com/fondosycapturas/previo/thump_8320732img20130223wa0004.jpg (http://www.subirimagenes.com/fondosycapturas-img20130223wa0004-8320732.html)


http://s2.subirimagenes.com/fondosycapturas/previo/thump_8320734img20130223wa0003.jpg (http://www.subirimagenes.com/fondosycapturas-img20130223wa0003-8320734.html)

zeifer33
05-03-13, 04:46 PM
hi guys, last progress on the car.

http://s2.subirimagenes.com/fotos/previo/thump_8335352img621.jpg (http://www.subirimagenes.com/fotos-img621-8335352.html)
http://s2.subirimagenes.com/fotos/previo/thump_8335356img622.jpg (http://www.subirimagenes.com/fotos-img622-8335356.html)
http://s2.subirimagenes.com/fotos/previo/thump_8335357img623.jpg (http://www.subirimagenes.com/fotos-img623-8335357.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8335438img20130304wa0021.jpg (http://www.subirimagenes.com/fondosycapturas-img20130304wa0021-8335438.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8337808img20130304wa0030.jpg (http://www.subirimagenes.com/fondosycapturas-img20130304wa0030-8337808.html)

New engine mounts reinforcement, jajajaaj
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8337814img20130304wa0033.jpg (http://www.subirimagenes.com/fondosycapturas-img20130304wa0033-8337814.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8337816img20130304wa0035.jpg (http://www.subirimagenes.com/fondosycapturas-img20130304wa0035-8337816.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8337820img20130304wa0036.jpg (http://www.subirimagenes.com/fondosycapturas-img20130304wa0036-8337820.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8337823img20130304wa0037.jpg (http://www.subirimagenes.com/fondosycapturas-img20130304wa0037-8337823.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8337838img20130304wa0038.jpg (http://www.subirimagenes.com/fondosycapturas-img20130304wa0038-8337838.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8337840img20130304wa0043.jpg (http://www.subirimagenes.com/fondosycapturas-img20130304wa0043-8337840.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8337847img20130304wa0044.jpg (http://www.subirimagenes.com/fondosycapturas-img20130304wa0044-8337847.html)

zeifer33
07-03-13, 09:48 AM
Last update,
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8341921img20130304wa0042.jpg (http://www.subirimagenes.com/fondosycapturas-img20130304wa0042-8341921.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8341926img20130305wa0000.jpg (http://www.subirimagenes.com/fondosycapturas-img20130305wa0000-8341926.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8341929img20130305wa0003.jpg (http://www.subirimagenes.com/fondosycapturas-img20130305wa0003-8341929.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8341930img20130305wa0006.jpg (http://www.subirimagenes.com/fondosycapturas-img20130305wa0006-8341930.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8341934img20130305wa0012.jpg (http://www.subirimagenes.com/fondosycapturas-img20130305wa0012-8341934.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8341935img20130306wa0008.jpg (http://www.subirimagenes.com/fondosycapturas-img20130306wa0008-8341935.html)
http://s2.subirimagenes.com/fotos/previo/thump_8341938img20130306wa0011.jpg (http://www.subirimagenes.com/fotos-img20130306wa0011-8341938.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8341942img20130306wa0012.jpg (http://www.subirimagenes.com/fondosycapturas-img20130306wa0012-8341942.html)
All for now.

zeifer33
13-03-13, 10:43 AM
More changes on the car,

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8351074img20130308wa0014.jpg (http://www.subirimagenes.com/fondosycapturas-img20130308wa0014-8351074.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8351077img20130308wa0022.jpg (http://www.subirimagenes.com/fondosycapturas-img20130308wa0022-8351077.html)
http://s2.subirimagenes.com/fotos/previo/thump_8351082img20130311wa0014.jpg (http://www.subirimagenes.com/fotos-img20130311wa0014-8351082.html)

Not definitly, but they have more posibilities.ejejeje And more bits for the nova.

http://s2.subirimagenes.com/fotos/previo/thump_8353179img20130312wa0001.jpg (http://www.subirimagenes.com/fotos-img20130312wa0001-8353179.html)
http://s2.subirimagenes.com/fotos/previo/thump_8353182img20130312wa0007.jpg (http://www.subirimagenes.com/fotos-img20130312wa0007-8353182.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8353186img20130312wa0008.jpg (http://www.subirimagenes.com/fondosycapturas-img20130312wa0008-8353186.html)

The blue one its supply by OMP, the others are made by us.


http://s2.subirimagenes.com/fondosycapturas/previo/thump_8353188img20130312wa0010.jpg (http://www.subirimagenes.com/fondosycapturas-img20130312wa0010-8353188.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8353191img20130312wa0004.jpg (http://www.subirimagenes.com/fondosycapturas-img20130312wa0004-8353191.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8353192img20130312wa0005.jpg (http://www.subirimagenes.com/fondosycapturas-img20130312wa0005-8353192.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8353194img20130312wa0006.jpg (http://www.subirimagenes.com/fondosycapturas-img20130312wa0006-8353194.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8353195img20130312wa0012.jpg (http://www.subirimagenes.com/fondosycapturas-img20130312wa0012-8353195.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8353196img20130312wa0011.jpg (http://www.subirimagenes.com/fondosycapturas-img20130312wa0011-8353196.html)

Tomorrow we start welding the turrets, and interior rollcage reinforcements.:d

Benn
13-03-13, 01:33 PM
Liking what your doing with the cage.

zeifer33
14-03-13, 10:19 AM
Thx, really apreciated. The interior pieces are ready to weldn

http://s2.subirimagenes.com/fotos/previo/thump_8355075img20130313wa0010.jpg (http://www.subirimagenes.com/fotos-img20130313wa0010-8355075.html)

http://s2.subirimagenes.com/fotos/previo/thump_8355077img20130313wa0009.jpg (http://www.subirimagenes.com/fotos-img20130313wa0009-8355077.html)

zeifer33
15-03-13, 10:22 AM
More changes,jejenejej
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8356781img20130314wa0009.jpg (http://www.subirimagenes.com/fondosycapturas-img20130314wa0009-8356781.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8356786img20130314wa0010.jpg (http://www.subirimagenes.com/fondosycapturas-img20130314wa0010-8356786.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8356787img20130314wa0011.jpg (http://www.subirimagenes.com/fondosycapturas-img20130314wa0011-8356787.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8356790img20130314wa0012.jpg (http://www.subirimagenes.com/fondosycapturas-img20130314wa0012-8356790.html)

zeifer33
01-04-13, 03:56 PM
Hi, not much time to spend on the car. But a few changes what happend on these days.

http://s2.subirimagenes.com/fotos/previo/thump_8361928img20130316wa0003.jpg (http://www.subirimagenes.com/fotos-img20130316wa0003-8361928.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8361935img20130316wa0004.jpg (http://www.subirimagenes.com/fondosycapturas-img20130316wa0004-8361935.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8361937img20130316wa0006.jpg (http://www.subirimagenes.com/fondosycapturas-img20130316wa0006-8361937.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8361939img20130316wa0007.jpg (http://www.subirimagenes.com/fondosycapturas-img20130316wa0007-8361939.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8365916img20130318wa0001.jpg (http://www.subirimagenes.com/fondosycapturas-img20130318wa0001-8365916.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8365921img20130318wa0002.jpg (http://www.subirimagenes.com/fondosycapturas-img20130318wa0002-8365921.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8365923img20130318wa0003.jpg (http://www.subirimagenes.com/fondosycapturas-img20130318wa0003-8365923.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8365924img20130318wa0004.jpg (http://www.subirimagenes.com/fondosycapturas-img20130318wa0004-8365924.html)

http://s2.subirimagenes.com/fotos/previo/thump_8386079img20130328wa0002.jpg (http://www.subirimagenes.com/fotos-img20130328wa0002-8386079.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8386080img20130328wa0006.jpg (http://www.subirimagenes.com/fondosycapturas-img20130328wa0006-8386080.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8386081img20130328wa0007.jpg (http://www.subirimagenes.com/fondosycapturas-img20130328wa0007-8386081.html)

Ok, all for now. In the next days the car was painted, and we star the assembly process and the mechanical part.:thumb:

zeifer33
07-04-13, 03:38 PM
http://imageshack.us/a/img683/5025/img20130329wa0017.th.jpg (http://imageshack.us/photo/my-images/683/img20130329wa0017.jpg/)

http://imageshack.us/a/img585/6484/img20130403wa0018.th.jpg (http://imageshack.us/photo/my-images/585/img20130403wa0018.jpg/)

http://imageshack.us/a/img607/7463/img20130403wa0019.th.jpg (http://imageshack.us/photo/my-images/607/img20130403wa0019.jpg/)

http://imageshack.us/a/img32/3821/img20130404wa0003.th.jpg (http://imageshack.us/photo/my-images/32/img20130404wa0003.jpg/)

http://imageshack.us/a/img820/9135/img20130404wa0002.th.jpg (http://imageshack.us/photo/my-images/820/img20130404wa0002.jpg/)

http://imageshack.us/a/img248/9906/img20130405wa0005.th.jpg (http://imageshack.us/photo/my-images/248/img20130405wa0005.jpg/)

therealnovaboy
07-04-13, 06:00 PM
looks like a good quality build.

It must be great not having to cut half the car to bits to fix all the rust before you actually start modding it.

Are there a lot of novas still in spain?

zeifer33
08-04-13, 07:55 AM
Yeah, much nova's and good proyects. Not as UK projects but good enought.:thumb:

zeifer33
09-04-13, 10:22 AM
https://imageshack.us/scaled/large/51/img20130406wa0008.jpg (http://imageshack.us/photos/my-images/51/img20130406wa0008.jpg/)Uploaded with ImageShack.us (http://imageshack.us)
https://imageshack.us/scaled/large/855/img20130406wa0007j.jpg (http://imageshack.us/photos/my-images/855/img20130406wa0007j.jpg/)Uploaded with ImageShack.us (http://imageshack.us)
https://imageshack.us/scaled/large/51/img20130406wa0006w.jpg (http://imageshack.us/photos/my-images/51/img20130406wa0006w.jpg/)Uploaded with ImageShack.us (http://imageshack.us)
https://imageshack.us/scaled/large/692/img20130406wa0003.jpg (http://imageshack.us/photos/my-images/692/img20130406wa0003.jpg/)Uploaded with ImageShack.us (http://imageshack.us)

BRoadGhost
09-04-13, 02:32 PM
Hey this looks to be the start of something interesting :)

zeifer33
10-04-13, 03:25 PM
Yes, i hope that go on good direction.

zeifer33
11-04-13, 12:45 PM
https://imageshack.us/scaled/large/21/img20130406wa0000.jpg (http://imageshack.us/photos/my-images/21/img20130406wa0000.jpg/)
https://imageshack.us/scaled/large/69/img20130406wa0001m.jpg (http://imageshack.us/photos/my-images/69/img20130406wa0001m.jpg/)

Well, here it is wait for the engine....

zeifer33
16-04-13, 10:13 AM
For give a better apearance for the car we repaired the wings.
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8389831img20130409wa0010.jpg (http://www.subirimagenes.com/fondosycapturas-img20130409wa0010-8389831.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8389832img20130409wa0011.jpg (http://www.subirimagenes.com/fondosycapturas-img20130409wa0011-8389832.html)

NOV4_SPORT
18-04-13, 10:25 AM
Looking really good mate, keep up the good progress
Iain

zeifer33
07-05-13, 10:22 AM
Not much time to spend on the car, but nova is near to finish.
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8423214img20130406wa0014.jpg (http://www.subirimagenes.com/fondosycapturas-img20130406wa0014-8423214.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8423215img20130406wa0016.jpg (http://www.subirimagenes.com/fondosycapturas-img20130406wa0016-8423215.html)
http://s2.subirimagenes.com/fotos/previo/thump_8423217img20130411wa0006.jpg (http://www.subirimagenes.com/fotos-img20130411wa0006-8423217.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8423218img20130419wa0015.jpg (http://www.subirimagenes.com/fondosycapturas-img20130419wa0015-8423218.html)
http://s2.subirimagenes.com/otros/previo/thump_8423219img20130427wa0001.jpg (http://www.subirimagenes.com/otros-img20130427wa0001-8423219.html)

Its all for now.

zeifer33
07-05-13, 10:23 AM
Looking really good mate, keep up the good progress
Iain

Thnks, im trying do my best.

oVerboost
07-05-13, 12:32 PM
Zeifer, what part of Galicia are you? My dad is from there and I have a lot of family still out there, small world! lol

zeifer33
07-05-13, 02:28 PM
Zeifer, what part of Galicia are you? My dad is from there and I have a lot of family still out there, small world! lol

Wow, really small world!im from Nigran near Vigo, but i live at Ferrol right now.

oVerboost
07-05-13, 05:48 PM
My dad and his side of the family are from/in Lugo... :)

zeifer33
08-05-13, 07:57 AM
My dad and his side of the family are from/in Lugo... :)

Nice, if you come here on holydays call me, ok.

zeifer33
21-05-13, 09:34 AM
Well, time for a little update.
Tank and fuel lines are in now,
http://s2.subirimagenes.com/fotos/previo/thump_8447895img20130429wa0000.jpg (http://www.subirimagenes.com/fotos-img20130429wa0000-8447895.html)
We repair the broken handbrake line, previous owner dont make the proper asembly,
http://s2.subirimagenes.com/fotos/previo/thump_8447900img20130501wa0000.jpg (http://www.subirimagenes.com/fotos-img20130501wa0000-8447900.html)
When we put the dashboard, we broke the windowscreen, and 3 windowscreens laterlol the job its finish
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8447899img20130429wa0004.jpg (http://www.subirimagenes.com/fondosycapturas-img20130429wa0004-8447899.html)
New interior fuelines(yes i know that aeroquip lines are better option, but are really expensive and hard to find right here.
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8447904img20130430wa0008.jpg (http://www.subirimagenes.com/fondosycapturas-img20130430wa0008-8447904.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8447910img20130430wa0009.jpg (http://www.subirimagenes.com/fondosycapturas-img20130430wa0009-8447910.html)
Dashboard, near to finish...
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8447914img20130430wa0007.jpg (http://www.subirimagenes.com/fondosycapturas-img20130430wa0007-8447914.html)
And for last, my OEM pedals are ready, i race the two previous events with Sparco pedals were really big and uncomfortable.
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8447919img20130502wa0004.jpg (http://www.subirimagenes.com/fondosycapturas-img20130502wa0004-8447919.html)

Ok, as soon as posible last changes.

zeifer33
22-05-13, 12:32 PM
More changes, we made a battary support.
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8450050img20130502wa0005.jpg (http://www.subirimagenes.com/fondosycapturas-img20130502wa0005-8450050.html)
And put into his site.
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8450054img20130502wa0007.jpg (http://www.subirimagenes.com/fondosycapturas-img20130502wa0007-8450054.html)
A temporal solution for the wing, with red vinyl.
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8450057img20130502wa0008.jpg (http://www.subirimagenes.com/fondosycapturas-img20130502wa0008-8450057.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8450059img20130502wa0009.jpg (http://www.subirimagenes.com/fondosycapturas-img20130502wa0009-8450059.html)
And the back of the car ready,
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8450062img20130502wa0010.jpg (http://www.subirimagenes.com/fondosycapturas-img20130502wa0010-8450062.html)

Next day, more changes.:thumb:

zeifer33
24-05-13, 08:47 AM
Ok, last changes in the car. The engine back inside after 2 monthslol

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8453965img20130505wa0019.jpg (http://www.subirimagenes.com/fondosycapturas-img20130505wa0019-8453965.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8453967img20130505wa0020.jpg (http://www.subirimagenes.com/fondosycapturas-img20130505wa0020-8453967.html)
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8453969img20130505wa0021.jpg (http://www.subirimagenes.com/fondosycapturas-img20130505wa0021-8453969.html)

We stopped at the best part, i hope that we can put in the next post a vid of the engine running but less more work on it and i dont have much time to spend:d

Benn
24-05-13, 06:35 PM
Looking good.

zeifer33
27-05-13, 11:20 AM
Looking good.

jejeje, thx. I'm trying.

zeifer33
26-06-13, 05:59 PM
Well, not much to say about the car. No time and money for really updates, but, the wiring loom its near finish and the front wings are ready to fit...


http://s2.subirimagenes.com/fondosycapturas/previo/thump_8510525img20130622wa0006.jpg (http://www.subirimagenes.com/fondosycapturas-img20130622wa0006-8510525.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8510528img20130625wa0002.jpg (http://www.subirimagenes.com/fondosycapturas-img20130625wa0002-8510528.html)

http://s2.subirimagenes.com/fotos/previo/thump_8510530img20130625wa0003.jpg (http://www.subirimagenes.com/fotos-img20130625wa0003-8510530.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8510532img20130625wa0004.jpg (http://www.subirimagenes.com/fondosycapturas-img20130625wa0004-8510532.html)

zeifer33
04-07-13, 05:42 PM
Not big changes on the project, the guiltly has been my other nova.

http://s2.subirimagenes.com/fotos/previo/thump_8522648img20130625wa0005.jpg (http://www.subirimagenes.com/fotos-img20130625wa0005-8522648.html)

http://s2.subirimagenes.com/fotos/previo/thump_8522649img20130625wa0006.jpg (http://www.subirimagenes.com/fotos-img20130625wa0006-8522649.html)

http://s2.subirimagenes.com/fotos/previo/thump_8522655img20130625wa0007.jpg (http://www.subirimagenes.com/fotos-img20130625wa0007-8522655.html)

http://s2.subirimagenes.com/fotos/previo/thump_8522661cam00142.jpg (http://www.subirimagenes.com/fotos-cam00142-8522661.html)

zeifer33
24-07-13, 08:34 PM
Hi, a few changes on the nova was happend these days. The engine its running again, the electrical and cooling system are near to finish and its time to take a new suspension and brake parts. A few pics talk better than me.

http://s2.subirimagenes.com/fotos/previo/thump_8551416img20130625wa0009.jpg (http://www.subirimagenes.com/fotos-img20130625wa0009-8551416.html)

http://s2.subirimagenes.com/fotos/previo/thump_8551430img20130625wa0011.jpg (http://www.subirimagenes.com/fotos-img20130625wa0011-8551430.html)

http://s2.subirimagenes.com/fotos/previo/thump_8551431img20130625wa0013.jpg (http://www.subirimagenes.com/fotos-img20130625wa0013-8551431.html)

And a few vids of the engine start after 6 month stopped.

http://www.youtube.com/watch?v=eHpknlI3T-M&feature=c4-overview&list=UUjv3hlyfUzGEfFBdOz5u7qQ

http://www.youtube.com/watch?v=voWPYTUHzbQ&feature=c4-overview&list=UUjv3hlyfUzGEfFBdOz5u7qQ

nova_niek
25-07-13, 09:05 PM
Lots of work! You don't hang about. Like it a lot!

zeifer33
26-07-13, 09:40 AM
Lots of work! You don't hang about. Like it a lot!

Thanks, we try do the best.

zeifer33
26-07-13, 09:53 PM
Well, while we wait for the new suspension, here we have the new calipers. We need clean and prepare to install, I believe that with 280 mm disc have enough for now.

http://s2.subirimagenes.com/fotos/previo/thump_8554290img20130625wa0014.jpg (http://www.subirimagenes.com/fotos-img20130625wa0014-8554290.html)

zeifer33
30-10-13, 02:23 PM
Well, a few things was change in these days. Brake system was stopped because i have a problem with the calipers, the suspension its provisionaly in the car waiting for new springs, interior its nearly to finish and for now its all...

http://s2.subirimagenes.com/fotos/previo/thump_8677867cam00376.jpg (http://www.subirimagenes.com/fotos-cam00376-8677867.html)



http://s2.subirimagenes.com/fotos/previo/thump_8677872cam00486.jpg (http://www.subirimagenes.com/fotos-cam00486-8677872.html)

http://s2.subirimagenes.com/fotos/previo/thump_8677873cam00487.jpg (http://www.subirimagenes.com/fotos-cam00487-8677873.html)

http://s2.subirimagenes.com/fotos/previo/thump_8677874cam00507.jpg (http://www.subirimagenes.com/fotos-cam00507-8677874.html)

http://s2.subirimagenes.com/fotos/previo/thump_8677875cam00509.jpg (http://www.subirimagenes.com/fotos-cam00509-8677875.html)

http://s2.subirimagenes.com/fotos/previo/thump_8677876cam00422.jpg (http://www.subirimagenes.com/fotos-cam00422-8677876.html)

http://s2.subirimagenes.com/fotos/previo/thump_8677877cam00426.jpg (http://www.subirimagenes.com/fotos-cam00426-8677877.html)
http://s2.subirimagenes.com/fotos/previo/thump_8677879cam00536.jpg (http://www.subirimagenes.com/fotos-cam00536-8677879.html)

http://s2.subirimagenes.com/fotos/previo/thump_8677880cam00533.jpg (http://www.subirimagenes.com/fotos-cam00533-8677880.html)

http://s2.subirimagenes.com/fotos/previo/thump_8677881cam00532.jpg (http://www.subirimagenes.com/fotos-cam00532-8677881.html)

http://s2.subirimagenes.com/fotos/previo/thump_8677882cam00410.jpg (http://www.subirimagenes.com/fotos-cam00410-8677882.html)

zeifer33
30-10-13, 02:37 PM
http://s2.subirimagenes.com/otros/previo/thump_8677900dsc0102.jpg (http://www.subirimagenes.com/otros-dsc0102-8677900.html)

http://s2.subirimagenes.com/fotos/previo/thump_8677901cam00328.jpg (http://www.subirimagenes.com/fotos-cam00328-8677901.html)

http://s2.subirimagenes.com/fotos/previo/thump_8677902cam00423.jpg (http://www.subirimagenes.com/fotos-cam00423-8677902.html)

http://s2.subirimagenes.com/fotos/previo/thump_8677904cam00424.jpg (http://www.subirimagenes.com/fotos-cam00424-8677904.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8677905img20130826wa0005.jpg (http://www.subirimagenes.com/fondosycapturas-img20130826wa0005-8677905.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8677906img20130826wa0007.jpg (http://www.subirimagenes.com/fondosycapturas-img20130826wa0007-8677906.html)

zeifer33
13-11-13, 09:01 AM
Hi, more parts have been arrived these days. New springs, Faulkners 323 lbs and "C" spanner
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8694869img20130625wa0045.jpg (http://www.subirimagenes.com/fondosycapturas-img20130625wa0045-8694869.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8694870img20130625wa0048.jpg (http://www.subirimagenes.com/fondosycapturas-img20130625wa0048-8694870.html)

New slimline fans, 10" to cover all the radiator. I have a few problems with temp, I hepo resolve with these change.
http://s2.subirimagenes.com/fondosycapturas/previo/thump_8694872img20130625wa0049.jpg (http://www.subirimagenes.com/fondosycapturas-img20130625wa0049-8694872.html)

And new brake calipers, thanks to Simon for sending them to me.
http://s2.subirimagenes.com/fotos/previo/thump_8694874img20130625wa0053.jpg (http://www.subirimagenes.com/fotos-img20130625wa0053-8694874.html)

Finally, im refurbish two of my old R888.
http://s2.subirimagenes.com/fotos/previo/thump_8694875img20130625wa0050.jpg (http://www.subirimagenes.com/fotos-img20130625wa0050-8694875.html)

Thats all, i need some time to put all into the nova again.

Benn
13-11-13, 06:04 PM
Nice collecting of parts...

marcgte
13-11-13, 06:35 PM
Some money spent there on them parts,nice collection as we'll

zeifer33
13-11-13, 11:00 PM
True, the cost starts to be considerable. Now we have to start converting all these pieces in a car.

zeifer33
14-11-13, 10:09 PM
Today we spent most of the day cleaning wheels, a working quite necessary ...lol


http://s2.subirimagenes.com/fotos/previo/thump_8697055img20131114112010.jpg (http://www.subirimagenes.com/fotos-img20131114112010-8697055.html)

http://s2.subirimagenes.com/fotos/previo/thump_8697082img20131114124431.jpg (http://www.subirimagenes.com/fotos-img20131114124431-8697082.html)

http://s2.subirimagenes.com/fotos/previo/thump_8697084img20131114124443.jpg (http://www.subirimagenes.com/fotos-img20131114124443-8697084.html)

http://s2.subirimagenes.com/fotos/previo/thump_8697089img20131114124456.jpg (http://www.subirimagenes.com/fotos-img20131114124456-8697089.html)

Front axle nearly finished...
http://s2.subirimagenes.com/fotos/previo/thump_8697067img20131114204216.jpg (http://www.subirimagenes.com/fotos-img20131114204216-8697067.html)

And we put a few parts inside.
http://s2.subirimagenes.com/fotos/previo/thump_8697090img20131114205408.jpg (http://www.subirimagenes.com/fotos-img20131114205408-8697090.html)

http://s2.subirimagenes.com/fotos/previo/thump_8697093img20131114205657.jpg (http://www.subirimagenes.com/fotos-img20131114205657-8697093.html)

http://s2.subirimagenes.com/fotos/previo/thump_8697095img20131114205908.jpg (http://www.subirimagenes.com/fotos-img20131114205908-8697095.html)

http://s2.subirimagenes.com/fotos/previo/thump_8697100img20131114205513.jpg (http://www.subirimagenes.com/fotos-img20131114205513-8697100.html)

well, i hope finish soon. :d

zeifer33
18-11-13, 11:00 PM
The nova is almost on the road again, the year is ending and the car needs to be finished for the 2014 season.




http://s2.subirimagenes.com/fotos/previo/thump_8702422img20130625wa0075.jpg (http://www.subirimagenes.com/fotos-img20130625wa0075-8702422.html)

http://s2.subirimagenes.com/fotos/previo/thump_8702430img20130625wa0076.jpg (http://www.subirimagenes.com/fotos-img20130625wa0076-8702430.html)

http://s2.subirimagenes.com/fotos/previo/thump_8702434img20130625wa0077.jpg (http://www.subirimagenes.com/fotos-img20130625wa0077-8702434.html)

http://s2.subirimagenes.com/fotos/previo/thump_8702394img20131118142936.jpg (http://www.subirimagenes.com/fotos-img20131118142936-8702394.html)

http://s2.subirimagenes.com/fotos/previo/thump_8702396img20131118203818.jpg (http://www.subirimagenes.com/fotos-img20131118203818-8702396.html)

http://s2.subirimagenes.com/fotos/previo/thump_8702402img20131118204143.jpg (http://www.subirimagenes.com/fotos-img20131118204143-8702402.html)

http://s2.subirimagenes.com/fotos/previo/thump_8702404img20131118204204.jpg (http://www.subirimagenes.com/fotos-img20131118204204-8702404.html)

http://s2.subirimagenes.com/fotos/previo/thump_8702410img20131118204216.jpg (http://www.subirimagenes.com/fotos-img20131118204216-8702410.html)

Well, time for the finishing touches and test it as soon as possible.

zeifer33
20-11-13, 10:08 PM
To save some weight on the front axle, we made a policarbonate plates.
http://s2.subirimagenes.com/fotos/previo/thump_8705002img20130625wa0089.jpg (http://www.subirimagenes.com/fotos-img20130625wa0089-8705002.html)

http://s2.subirimagenes.com/fotos/previo/thump_8705004img20130625wa0090.jpg (http://www.subirimagenes.com/fotos-img20130625wa0090-8705004.html)

http://s2.subirimagenes.com/fotos/previo/thump_8705010img20130625wa0093.jpg (http://www.subirimagenes.com/fotos-img20130625wa0093-8705010.html)

Time to put some decals on the dash.
http://s2.subirimagenes.com/fotos/previo/thump_8705013img20130625wa0094.jpg (http://www.subirimagenes.com/fotos-img20130625wa0094-8705013.html)

zeifer33
30-11-13, 06:10 PM
These week im very bussy with the car, i need finish quickly.
http://s2.subirimagenes.com/fotos/previo/thump_8717757img20131123140205.jpg (http://www.subirimagenes.com/fotos-img20131123140205-8717757.html)

http://s2.subirimagenes.com/fotos/previo/thump_8717759img20131123140407.jpg (http://www.subirimagenes.com/fotos-img20131123140407-8717759.html)

http://s2.subirimagenes.com/fotos/previo/thump_8717761img20131126184311.jpg (http://www.subirimagenes.com/fotos-img20131126184311-8717761.html)

http://s2.subirimagenes.com/fotos/previo/thump_8717760img20131126185839.jpg (http://www.subirimagenes.com/fotos-img20131126185839-8717760.html)

http://s2.subirimagenes.com/fotos/previo/thump_8717762img20131126185903.jpg (http://www.subirimagenes.com/fotos-img20131126185903-8717762.html)

http://s2.subirimagenes.com/fotos/previo/thump_8717763img20131126172749.jpg (http://www.subirimagenes.com/fotos-img20131126172749-8717763.html)

http://s2.subirimagenes.com/fotos/previo/thump_8717766img20131126172801.jpg (http://www.subirimagenes.com/fotos-img20131126172801-8717766.html)

http://s2.subirimagenes.com/fotos/previo/thump_8717769img20131126180343.jpg (http://www.subirimagenes.com/fotos-img20131126180343-8717769.html)

http://s2.subirimagenes.com/fotos/previo/thump_8717771img20131127205637.jpg (http://www.subirimagenes.com/fotos-img20131127205637-8717771.html)

all for now.

zeifer33
05-12-13, 09:21 AM
Well, these days we change the exhaust manifold 4-1 by a standard 4-2-1. And obviously we have problems with the front ARB clearance, we decide to make the spacers into a piece of Nylon as you can watch into the technical forum.

http://s2.subirimagenes.com/fotos/previo/thump_8723836img20131203203613.jpg (http://www.subirimagenes.com/fotos-img20131203203613-8723836.html)

Looking into the Opel EPC, i found 3 type of front ARB(18-20-22mm). The program not say nothing about models use each bar, but looking into my storage, i found a kit of 21 mm tie arms and 22 mm ARB.

http://s2.subirimagenes.com/fotos/previo/thump_8723835img20131203205330.jpg (http://www.subirimagenes.com/fotos-img20131203205330-8723835.html)

Someone knows some other piece that can be used?

Benn
05-12-13, 12:49 PM
GSI/GTE/derv ones use the largest ARBs.

zeifer33
08-12-13, 12:25 PM
GSI/GTE/derv ones use the largest ARBs.

Perfect, thanks.

zeifer33
11-12-13, 10:29 PM
Not much work these days, single wiper motor is finished, the problems with the front ARB solved and the new 22mm ARB is on the car.

http://s2.subirimagenes.com/fotos/previo/thump_8732496img20130625wa0113.jpg (http://www.subirimagenes.com/fotos-img20130625wa0113-8732496.html)

http://s2.subirimagenes.com/fotos/previo/thump_8732502img20130625wa0108.jpg (http://www.subirimagenes.com/fotos-img20130625wa0108-8732502.html)

http://s2.subirimagenes.com/fotos/previo/thump_8732504img20130625wa0109.jpg (http://www.subirimagenes.com/fotos-img20130625wa0109-8732504.html)

http://s2.subirimagenes.com/fotos/previo/thump_8732507img20130625wa0107.jpg (http://www.subirimagenes.com/fotos-img20130625wa0107-8732507.html)

http://s2.subirimagenes.com/fotos/previo/thump_8732510img20130625wa0110.jpg (http://www.subirimagenes.com/fotos-img20130625wa0110-8732510.html)

http://s2.subirimagenes.com/fotos/previo/thump_8732511img20130625wa0112.jpg (http://www.subirimagenes.com/fotos-img20130625wa0112-8732511.html)

Iain
12-12-13, 12:57 PM
I like the nylon ARB blocks, nice DIY solution

zeifer33
12-12-13, 03:39 PM
I like the nylon ARB blocks, nice DIY solution

We must replace the old manifold because in the las event i cut too much in a fast harpin and hit the exhaust. The old manifold dont touch with ARB and we dont need the spacers, but the reparations arent cheap and we decide install the standard manilfold. The most cheap and quickly solution is use a Nylon piece that we have in the garage, ajjaajja

zeifer33
30-01-14, 05:21 PM
6 km of test finish without much problems. I dont like the sense of the steering, at low speed seems as if floating.

http://s2.subirimagenes.com/fotos/previo/thump_8794471img20140129170229.jpg (http://www.subirimagenes.com/fotos-img20140129170229-8794471.html)

http://s2.subirimagenes.com/fotos/previo/thump_8794488img20140129170240.jpg (http://www.subirimagenes.com/fotos-img20140129170240-8794488.html)

In overall, im very happy with the car balance. But needs more km,hahaha

zeifer33
02-02-14, 05:23 PM
Here is an other project for the team, its for road use with 1.6 OHC engine, webber 40 IDF, Kent cam, custom full exhaust and a few gr4 rear axle modifications. Now i have a problem, the master brake servo is KO by rust, the project is nearly finish and with this reparation is ready to start up and test.

http://s2.subirimagenes.com/fotos/previo/thump_8798128img20140201141648.jpg (http://www.subirimagenes.com/fotos-img20140201141648-8798128.html)

http://s2.subirimagenes.com/fondosycapturas/previo/thump_8798131img20140201141712.jpg (http://www.subirimagenes.com/fondosycapturas-img20140201141712-8798131.html)

And another one of the nova.

http://s2.subirimagenes.com/fotos/previo/thump_8798134img20140130202114.jpg (http://www.subirimagenes.com/fotos-img20140130202114-8798134.html)

http://s2.subirimagenes.com/fotos/previo/thump_8798135img20140130202000.jpg (http://www.subirimagenes.com/fotos-img20140130202000-8798135.html)

zeifer33
02-04-14, 02:50 PM
Last bits for the nova, and quick pic of the last ride.

http://i935.photobucket.com/albums/ad195/zeifer33/Mobile%20Uploads/IMG-20140327-WA0002_zps8b0caeca.jpg (http://s935.photobucket.com/user/zeifer33/media/Mobile%20Uploads/IMG-20140327-WA0002_zps8b0caeca.jpg.html)

http://i935.photobucket.com/albums/ad195/zeifer33/Mobile%20Uploads/IMG-20140327-WA0001_zps9009b2f2.jpg (http://s935.photobucket.com/user/zeifer33/media/Mobile%20Uploads/IMG-20140327-WA0001_zps9009b2f2.jpg.html)

http://i935.photobucket.com/albums/ad195/zeifer33/Mobile%20Uploads/IMG_20140316_124122_zps370ac077.jpg (http://s935.photobucket.com/user/zeifer33/media/Mobile%20Uploads/IMG_20140316_124122_zps370ac077.jpg.html)

http://i935.photobucket.com/albums/ad195/zeifer33/Mobile%20Uploads/IMG_20140316_124133_zps387074bc.jpg (http://s935.photobucket.com/user/zeifer33/media/Mobile%20Uploads/IMG_20140316_124133_zps387074bc.jpg.html)

nova_niek
02-04-14, 06:30 PM
Nice work! Hope the 2014 seasons goes well for you!

zeifer33
05-04-14, 03:38 PM
Thanks, im waiting for the solid steering rack mounts to put all new parts and test the car on the circuit. Any idea who are the best?

zeifer33
15-05-14, 02:27 PM
More and last updates.
http://i935.photobucket.com/albums/ad195/zeifer33/IMG-20140423-WA0000_zpsg31o3hxk.jpg (http://s935.photobucket.com/user/zeifer33/media/IMG-20140423-WA0000_zpsg31o3hxk.jpg.html)


http://i935.photobucket.com/albums/ad195/zeifer33/IMG-20140422-WA0000_zpshxvhwijn.jpg (http://s935.photobucket.com/user/zeifer33/media/IMG-20140422-WA0000_zpshxvhwijn.jpg.html)

zeifer33
15-05-14, 02:34 PM
To install the top mounts i need to make two spacers.
http://i935.photobucket.com/albums/ad195/zeifer33/IMG_20140430_192916_zpsvqtd2qfh.jpg (http://s935.photobucket.com/user/zeifer33/media/IMG_20140430_192916_zpsvqtd2qfh.jpg.html)

http://i935.photobucket.com/albums/ad195/zeifer33/IMG_20140430_192933_zpsn4x7cvdc.jpg (http://s935.photobucket.com/user/zeifer33/media/IMG_20140430_192933_zpsn4x7cvdc.jpg.html)

http://i935.photobucket.com/albums/ad195/zeifer33/IMG_20140503_105221_zpswuvku3f2.jpg (http://s935.photobucket.com/user/zeifer33/media/IMG_20140503_105221_zpswuvku3f2.jpg.html)

http://i935.photobucket.com/albums/ad195/zeifer33/IMG_20140503_105239_zpszi30n8vw.jpg (http://s935.photobucket.com/user/zeifer33/media/IMG_20140503_105239_zpszi30n8vw.jpg.html)

Now i need to cut the turret for adjust the camber, any advice?

http://i935.photobucket.com/albums/ad195/zeifer33/IMG-20140503-WA0028_zpsliqkvawi.jpg (http://s935.photobucket.com/user/zeifer33/media/IMG-20140503-WA0028_zpsliqkvawi.jpg.html)
http://i935.photobucket.com/albums/ad195/zeifer33/IMG-20140503-WA0034_zpskgsflqmg.jpg (http://s935.photobucket.com/user/zeifer33/media/IMG-20140503-WA0034_zpskgsflqmg.jpg.html)
http://i935.photobucket.com/albums/ad195/zeifer33/IMG-20140503-WA0033_zpsrzl2kbyl.jpg (http://s935.photobucket.com/user/zeifer33/media/IMG-20140503-WA0033_zpsrzl2kbyl.jpg.html)

dgbnova#1
15-05-14, 03:10 PM
Use a Big hole saw the size you want

bolt a 3 mm plate via the 2 8mm holes in the strut top mark and drill the centre or the centre you want and drill away the plate is just a guide I've tryed similar with thinner plate and got bad results but bonus is bolt it on other top and it's pre set for the same

you can use thick ply if you wanted

zeifer33
15-05-14, 10:32 PM
Use a Big hole saw the size you want

bolt a 3 mm plate via the 2 8mm holes in the strut top mark and drill the centre or the centre you want and drill away the plate is just a guide I've tryed similar with thinner plate and got bad results but bonus is bolt it on other top and it's pre set for the same

you can use thick ply if you wanted

Thx Dave i think the same.

zeifer33
28-06-14, 12:00 PM
Not much changes into the car atm, alignement ready, small test completed and other small problems ready. We are waiting for Sponsors to do the rest of the season and maybe take money for the 2015 season.

http://i935.photobucket.com/albums/ad195/zeifer33/IMG-20130625-WA0124_zps4691dadd.jpg (http://s935.photobucket.com/user/zeifer33/media/IMG-20130625-WA0124_zps4691dadd.jpg.html)

http://i935.photobucket.com/albums/ad195/zeifer33/IMG-20130625-WA0125_zps4dd52017.jpg (http://s935.photobucket.com/user/zeifer33/media/IMG-20130625-WA0125_zps4dd52017.jpg.html)

Here we are into a small vid at the II Piñeiro Motorsport festival.

http://www.youtube.com/watch?v=aJWFl2BvvCo#action=share

zeifer33
22-07-14, 09:32 AM
hi,

This weekend, we go to a near circuit, "Vasco Sameiro" in Portugal to do test with the nova. All goes fabulous, the car balance is perfect and no major tuning must do it but its necessary to find a problem with the ignition system that produces problems with full and middle accelerations and change oil sump and pump gaskets "again".



https://www.youtube.com/watch?v=BDKc0g1omns

zeifer33
22-07-14, 09:32 AM
https://www.youtube.com/watch?v=pI-NUezV4n4


https://www.youtube.com/watch?v=Zv883eSIoIM


https://www.youtube.com/watch?v=Lo9BtDErUQ0


https://www.youtube.com/watch?v=oV_DtCQHw9Y


https://www.youtube.com/watch?v=ZHNXKIbizdc


https://www.youtube.com/watch?v=AGVOIYbUJ8I

Southie
22-07-14, 09:48 AM
Merged your videos ;)

zeifer33
22-07-14, 01:39 PM
Merged your videos ;)





I have not much experience editing videos. I´m sorry:(

therealnovaboy
22-07-14, 02:29 PM
I was looking at these track rod ends and was wondering if you could fit them on the underside of the hub rather than the top to keep the angle of the rack more horizontal with lowered susspension.

did you have to drill out the taper to make the hole in the hub parallel since you have done away with the track rod taper? i was thinking the bolt that goes through the ball joint and hub would want to move about in the taper all the time.

cars looking good. :thumb:

Southie
22-07-14, 02:38 PM
I have not much experience editing videos. I´m sorry:(
I mean I've put them together in one post rather than being in separate ones... I don't mean join them together lol

zeifer33
23-07-14, 02:29 PM
I mean I've put them together in one post rather than being in separate ones... I don't mean join them together lol

ohh!!:tard: sorry i dont understand you, when I pasted the links, forum does not allow me to put more than one video per post, may be for my account? Could some moderator order it? I think that would be better.

zeifer33
23-07-14, 02:37 PM
I was looking at these track rod ends and was wondering if you could fit them on the underside of the hub rather than the top to keep the angle of the rack more horizontal with lowered susspension.

did you have to drill out the taper to make the hole in the hub parallel since you have done away with the track rod taper? i was thinking the bolt that goes through the ball joint and hub would want to move about in the taper all the time.

cars looking good. :thumb:

I'm not trying to fit them on the lower arms, but the size of the rod are similar. To put the rods, you need to drill the hole to pass the screw.

therealnovaboy
23-07-14, 08:33 PM
ok thanks. Id idnt mean at the bottom ball joint I meant where you have them but upsidedown. its hard to explain since i can only say "hello" in spanish.

edit, found this:http://i1211.photobucket.com/albums/cc430/mitchdub/29A25F0E-0568-404A-81F0-5310D6859AB8-329-0000002782A9C99F_zps1c99b756.jpg

zeifer33
23-07-14, 09:04 PM
ok thanks. Id idnt mean at the bottom ball joint I meant where you have them but upsidedown. its hard to explain since i can only say "hello" in spanish.

Ohhh, ok ok. yes i know that you mean. I try to do the same, but i dont like the position of the steering arms. I think that they must go upper.

zeifer33
25-07-14, 02:47 PM
A quick onboard of 1 session. Sorry for the poor cam setup:(


https://www.youtube.com/watch?v=2GlunlPYWDg

zeifer33
26-07-14, 01:59 PM
Few pics of the last test.
http://i935.photobucket.com/albums/ad195/zeifer33/Test%20Braga%202014/IMG_7192_zps97ce6113.jpg (http://s935.photobucket.com/user/zeifer33/media/Test%20Braga%202014/IMG_7192_zps97ce6113.jpg.html)
http://i935.photobucket.com/albums/ad195/zeifer33/Test%20Braga%202014/IMG_7538_zpsf0b8a6e9.jpg (http://s935.photobucket.com/user/zeifer33/media/Test%20Braga%202014/IMG_7538_zpsf0b8a6e9.jpg.html)
http://i935.photobucket.com/albums/ad195/zeifer33/Test%20Braga%202014/IMG_7554_zps4b2df2dc.jpg (http://s935.photobucket.com/user/zeifer33/media/Test%20Braga%202014/IMG_7554_zps4b2df2dc.jpg.html)
http://i935.photobucket.com/albums/ad195/zeifer33/Test%20Braga%202014/IMG_7618_zps150519e8.jpg (http://s935.photobucket.com/user/zeifer33/media/Test%20Braga%202014/IMG_7618_zps150519e8.jpg.html)
http://i935.photobucket.com/albums/ad195/zeifer33/Test%20Braga%202014/IMG_7629_zps54ea1526.jpg (http://s935.photobucket.com/user/zeifer33/media/Test%20Braga%202014/IMG_7629_zps54ea1526.jpg.html)
http://i935.photobucket.com/albums/ad195/zeifer33/Test%20Braga%202014/IMG_7677_zpsd17ebc9c.jpg (http://s935.photobucket.com/user/zeifer33/media/Test%20Braga%202014/IMG_7677_zpsd17ebc9c.jpg.html)
http://i935.photobucket.com/albums/ad195/zeifer33/Test%20Braga%202014/IMG-20140721-WA0023_zps6cec0e54.jpg (http://s935.photobucket.com/user/zeifer33/media/Test%20Braga%202014/IMG-20140721-WA0023_zps6cec0e54.jpg.html)
http://i935.photobucket.com/albums/ad195/zeifer33/Test%20Braga%202014/IMG-20140721-WA0025_zps45d04d5a.jpg (http://s935.photobucket.com/user/zeifer33/media/Test%20Braga%202014/IMG-20140721-WA0025_zps45d04d5a.jpg.html)
http://i935.photobucket.com/albums/ad195/zeifer33/Test%20Braga%202014/IMG-20140721-WA0026_zps639de313.jpg (http://s935.photobucket.com/user/zeifer33/media/Test%20Braga%202014/IMG-20140721-WA0026_zps639de313.jpg.html)
http://i935.photobucket.com/albums/ad195/zeifer33/Test%20Braga%202014/IMG-20140721-WA0029_zps383697cd.jpg (http://s935.photobucket.com/user/zeifer33/media/Test%20Braga%202014/IMG-20140721-WA0029_zps383697cd.jpg.html)

nova_niek
28-07-14, 11:39 AM
A damp track always makes for interesting driving :thumb:

zeifer33
28-07-14, 12:14 PM
A damp track always makes for interesting driving :thumb:

Yeah, in the two next sessions the track surface was dry quickly and the grip of the R888 and slicks was necessary. But unfortunately we only have old wheels to waste on test.

zeifer33
30-09-14, 11:54 AM
Well, bad news unfortunately. I have an accident last weekend during a hill climb race, the car have several damages that put the project on hazard. So, we are searching another car to replace these, ready to race or for spares to repair the current car. Many options pass for my mind right now, rebuilt the 2.0L nova with the problems to do rally at my local championship or try to built a 1.6L and we have options to do rally and hill climb races.

http://i935.photobucket.com/albums/ad195/zeifer33/IMG-20130625-WA0151_zps8290bcfc.jpg (http://s935.photobucket.com/user/zeifer33/media/IMG-20130625-WA0151_zps8290bcfc.jpg.html)

dgbnova#1
30-09-14, 12:05 PM
Mate that's devastating after all the work I hope all was ok with you what a shame total loss on that one

Iain
30-09-14, 01:48 PM
Testament to the rollcage and fitting, glad you're safely on here showing us the pics. Looks nasty but I'm sure it'll lead to bigger and better things :)

zeifer33
30-09-14, 04:27 PM
Thanks guys, fortunatly i spend many hours on the chassis work, I have a broken bone on my right foot. Any idea where i can found parts to do a good 1.6 8V engine?

dgbnova#1
30-09-14, 04:46 PM
You just missed a cracking setup I did also bit pissed about it but something will come up

mr sri
30-09-14, 06:28 PM
Jeezo that's been a big off but as said previously shows that the roll cage does it job as it could have been a sh17 load worse :-(

zeifer33
01-10-14, 08:02 AM
I think too into buy a complet road car to use the parts for rebuilt my car... but i have the problem of MSA regulations.

zeifer33
03-10-14, 08:49 AM
Well, new chassis was arrived yesterday. Now time to order the ideas and start to disarm the cars...

http://i935.photobucket.com/albums/ad195/zeifer33/Corsa%20Rebuilt/0001_zps0bd44a29.jpg (http://s935.photobucket.com/user/zeifer33/media/0001_zps0bd44a29.jpg.html)

nova_niek
06-10-14, 08:19 AM
Holy crap! :eek: :eek: :eek:

http://i935.photobucket.com/albums/ad195/zeifer33/Corsa%20Restoration/IMG-20130625-WA0151_zps8290bcfc.jpg (http://s935.photobucket.com/user/zeifer33/media/Corsa%20Restoration/IMG-20130625-WA0151_zps8290bcfc.jpg.html)

As said by the other guys on here, it's a testament to having a proper rollcage. Good luck with your foot mate. Take your time and you'll find a suitable car to work on. With your skills and experience, you will turn it into a monster. :thumb:

zeifer33
06-10-14, 09:10 AM
you're being very kind, I thank you very much. I know that I´m lucky. well, i show you a few details before the accident to show the short by intense return of the nova.

http://i935.photobucket.com/albums/ad195/zeifer33/Corsa%20Restoration/IMG_20140920_102524_zpsc8e53ad9.jpg (http://s935.photobucket.com/user/zeifer33/media/Corsa%20Restoration/IMG_20140920_102524_zpsc8e53ad9.jpg.html)

http://i935.photobucket.com/albums/ad195/zeifer33/Corsa%20Restoration/IMG_20140920_165418_zpscf5cb54d.jpg (http://s935.photobucket.com/user/zeifer33/media/Corsa%20Restoration/IMG_20140920_165418_zpscf5cb54d.jpg.html)

http://i935.photobucket.com/albums/ad195/zeifer33/Corsa%20Restoration/IMG_20140920_165421_zps9d4302a6.jpg (http://s935.photobucket.com/user/zeifer33/media/Corsa%20Restoration/IMG_20140920_165421_zps9d4302a6.jpg.html)


https://www.youtube.com/watch?v=raiiXkYfKCA

Thanks again for all:thumb:

zeifer33
06-10-14, 09:11 AM
https://www.youtube.com/watch?v=tLhv4M1Y3Bw

zeifer33
06-10-14, 09:11 AM
https://www.youtube.com/watch?v=BoxdDpqoDCw

zeifer33
06-10-14, 09:40 AM
For bravest, the videos of the accident. +1K Plays !!!





https://www.youtube.com/watch?v=Cq_vUAuqsiA

https://www.youtube.com/watch?v=xeS2El5hGZ4

jimbob-mcgrew
06-10-14, 10:34 AM
wow, you endo'd it !

looks like there wasnt a whole lot you could do about that one.

how far down that hill did you roll ? .. you went right out of sight

any injuries ? or you ok

zeifer33
06-10-14, 05:24 PM
wow, you endo'd it !

looks like there wasnt a whole lot you could do about that one.

how far down that hill did you roll ? .. you went right out of sight

any injuries ? or you ok

not much to do when it happens.. I fall down around 4 m and hit with a stone. Not spectators damaged and not big personal damage.

nova_niek
13-10-14, 07:48 AM
Daaaaaaaaamn!!! :eek: :eek: :eek: :eek:

zeifer33
13-10-14, 08:31 AM
Yes, the accident is a bit spectacular as you can see at the videos. I cant do nothing for the moment on the car, i have the new chassis at the garage to start to strip down the old car and rebuild the project, but i don't decide yet what engine y use for it...

http://i935.photobucket.com/albums/ad195/zeifer33/Corsa%20Restoration/IMG-20140921-WA0006_zps6441e84a.jpg (http://s935.photobucket.com/user/zeifer33/media/Corsa%20Restoration/IMG-20140921-WA0006_zps6441e84a.jpg.html)

nova_niek
20-10-14, 09:51 AM
Boys and girls, this is not the way to park your Nova. :eek:

BRoadGhost
20-10-14, 08:30 PM
Hmm is that the same accident or have you had another one? :0

Benn
20-10-14, 08:38 PM
Christ!

Glad you've walked away ok. Gutted about the car tho.

mr sri
20-10-14, 09:39 PM
When you watch the video you certainly were shifting on roll cage = lifesaver

dgbnova#1
21-10-14, 12:06 AM
Spectacular footage mate glad your ok after that just met up with a track driver had an off in BMW m3 e36 120+ mph into a wall at spa snapped 2 vertebra full track race spec car

zeifer33
21-10-14, 09:12 AM
Hmm is that the same accident or have you had another one? :0

that's the unique important accident for the moment. I roll another nova at autograss a few times but nothing serious....hahahahaa

zeifer33
21-10-14, 09:17 AM
Spectacular footage mate glad your ok after that just met up with a track driver had an off in BMW m3 e36 120+ mph into a wall at spa snapped 2 vertebra full track race spec car

I'm surprised how end the interior of the car, if you see all points of the roll cage, they don't move nothing. I know i´am very lucky. thanks guys

cuatrolatas
24-10-14, 05:04 PM
What terrorific views, the pics and even more the videos!!

Nice to see the black diamond will be back on the road, no one better than you to make it possible.

Southie
24-10-14, 11:58 PM
What scared me is your crash... what scares me more is you want another Nova "Corsa A" after that.

Balls of steel is all I can say, or as in Yorkshire " Bloody hell lad your one lucky basta*rd"

zeifer33
27-10-14, 12:59 PM
What terrorific views, the pics and even more the videos!!

Nice to see the black diamond will be back on the road, no one better than you to make it possible.

hey dude, you really going to make me blush !!lol

zeifer33
27-10-14, 01:02 PM
What scared me is your crash... what scares me more is you want another Nova "Corsa A" after that.

Balls of steel is all I can say, or as in Yorkshire " Bloody hell lad your one lucky basta*rd"

lollol, maybe the crash make me foo. Maybe the crash make me fool. But, i love motorsport and i never can stop while I can.:thumb: