PDA

View Full Version : Twin 45 webers coil/dizzy help!!!



Jamie.bowen
07-11-12, 05:19 PM
Am trying to set up twin 45 webers on my XE nova... Have got the old type dizzy and coil... The problem I have got is no spark from the coil.. Any help?

Jamie.bowen
07-11-12, 05:35 PM
Also does anybody no what wires go where on the bottom of the coil module??

Jamie.bowen
08-11-12, 09:25 PM
Anyone???

mowgli
08-11-12, 09:26 PM
what is the coil/dizzy off??

Jamie.bowen
08-11-12, 09:32 PM
First of all it was a brand new kit which was bought of eBay, but also i now have the mk 2 cav dizzy/coil

Mincyballs
10-11-12, 07:49 PM
Can you give a little more info -- Have you plugged the module in to the dizzy plug (3pin iirc)? have you put the trigger wire to the coil which sould be on the negative side i think and put a constant live supply to the other side of the coil? then the green wire from the module should go to your rev counter? and i think you should be left with the module power supply cables then?

Check all that then check to see if the coil is getting the pulse by using a multi meter if not and all wiring is correct your prob looking at the hall effect trigger in the dizzy as its prob second hand it may have died

Hope thats some help