PDA

View Full Version : Wiring issue *help required*



ash.blue
16-10-12, 09:50 PM
I have a loose wire amongst a shambles of what can only be described as "a jumble of colour" .. And car wont start now ..
The wire in question is golden (looks like speaker cable) .. It goes into the big gromet so must be original wire (ive been told it would not of been put in by vauxhall) but that info shows otherwise. Behind glovebox its crimpped to a single black, this black goes up behind the centre piece of dash behind the heater directors and clock. Behind here that single black is crimpped onto 4 wires ..
*Red/black
*black
*2x slightly thicker blacks

I have a toggle switch (nt best I know) for ignition as key got snapped in door by previous owner. The gold wire carries 12v when switch is flipped .. But im getting no power to the coil. The goldish wire was attached to another colour wire (i assume) but what I dnt know ..

If anyone has any ideas on this, the help is appreciated.
Pics wud help nd if u cud tell me how to upload from mobile that would be awesome :)
Cheers ash