Jedro
14-10-12, 09:46 AM
still cant figure out why my V6 corsa drag car is over fueling
things we've tried:
X3 AFM's
X2 loom's
X2 coolant temp sensors
X2 crank sensor's
X2 cam sensor's
earths
timing checked
tested ECU on another car
compression test
3.0 bar reg
both blue and black (higher and lower flow) injectors
X2 lambda's
checked and checked over the wiring....
:wtf: still stumped
also, when ticking over it sounds ok but you can unplug things such as ICV and it doesn't change anything :wtf:
engine is a X25xe from a vec SRI but has ttv XE fly, C25XE ecu, inlet and loom and a set of G cams so C25xe
also running on corsa sport fuel pump
http://desmond.imageshack.us/Himg267/scaled.php?server=267&filename=photo0626.jpg&res=landing
any idea's please feel free to share as it was meant to be going to york for its first run today but its sat in bits now :(:(:(
things we've tried:
X3 AFM's
X2 loom's
X2 coolant temp sensors
X2 crank sensor's
X2 cam sensor's
earths
timing checked
tested ECU on another car
compression test
3.0 bar reg
both blue and black (higher and lower flow) injectors
X2 lambda's
checked and checked over the wiring....
:wtf: still stumped
also, when ticking over it sounds ok but you can unplug things such as ICV and it doesn't change anything :wtf:
engine is a X25xe from a vec SRI but has ttv XE fly, C25XE ecu, inlet and loom and a set of G cams so C25xe
also running on corsa sport fuel pump
http://desmond.imageshack.us/Himg267/scaled.php?server=267&filename=photo0626.jpg&res=landing
any idea's please feel free to share as it was meant to be going to york for its first run today but its sat in bits now :(:(:(