View Full Version : c20xe to turbo
daleNOVAbrennan
09-10-12, 05:00 PM
Hi,planning on rebuilding my xe, and while doing so fit let pistons, exhaust cam, turbo+manifold,drill out oil return,fit oil feed, throttlebody, loom and ecu.
Is there anything im not thinking of, and dont want anyone saying just buy a let, im rebuilding this anyway, and not in any rush to get it built so dont mind waiting for a bargin, cheers Dale
chambers1984
09-10-12, 05:06 PM
thats about all you need mate you can use the xe cams/throttlebody to save money just a vacum hole in the side of a let throttlebody but can mod the xe one easy
daleNOVAbrennan
09-10-12, 05:18 PM
cheers, how do they mod the xe throttlebody ?, will i need fuel reg, rail, injectors, got cream injectors now
turbojolt
09-10-12, 05:19 PM
dosnt the let have extra sensors on the inlet/tophat, seems to remember reading that on a simlar thread to this one
daleNOVAbrennan
09-10-12, 05:23 PM
couldnt find much on search, thought best to ask before i get half way through an realise im buggerd because it wont work
turbojolt
09-10-12, 05:24 PM
dont think i read it on here, might have been migweb someone was banging on about extra sensors and diffrent looms, will have a look for you
daleNOVAbrennan
09-10-12, 05:25 PM
cheers
turbojolt
09-10-12, 05:38 PM
never mind me I'm a pleb, it was just on about running a vacuum from the inlet not on about sensors, i will go sit in the corner now.
daleNOVAbrennan
09-10-12, 05:40 PM
haha, so u can use the xe throttlebody ?
Fuel reg should be a 3 bar one, if your current XE runs creams it's only be a 2.5 bar
And yet a set of yellow injectors
Mind the Amal valve and ecu too,
daleNOVAbrennan
09-10-12, 06:26 PM
ye got a diagram for the pipework,amal.Will get some yellows and fuel reg aswell, what size should i drill out the return oil feed?tap size? what works best on the lets a recirc or dump valve? sorry for all the questions best to know everything before i buy anything, cheers
chambers1984
09-10-12, 06:29 PM
ye mate sorry you will need injectors. prob best to put a aftermarket fuel reg on aswell so you can set it to what you want. you can run it without an amal valve just fit a boost controler.
daleNOVAbrennan
09-10-12, 06:35 PM
sounds like a plan, just set it to a safe level then it cant overboost
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.