View Full Version : Urgent help plz mounted my xe in and rear mount wont line up been told wrong mount
Been told front gearbox mount wrong took a 1.6 16v with a f15 out and replaced with a c20xe with f20 can anyone help i need a mount asap
Gearbox seems to be sitting to high and to over the anti rollbar
where in glasgow are ye mate? a saw yer old corsa about all the time so assume yer no far from me so i'll check if a have a spare mount n ask a few mates aswell. most of the local guys have a lot of parts kicking about n are a good help if you need anything, i've rarely had to travel for parts!
Brilliant mate am in coatbridge do u recon i have the wrong mount is there different ones for the front always done valver corsas totally different these novas so tight
This is the mount im using
http://i902.photobucket.com/albums/ac229/ryandocherty/D86325A5-FA24-4856-9CB8-E8D480EF53FE-57-00000008AF735B8B.jpg
http://i902.photobucket.com/albums/ac229/ryandocherty/079B529F-5951-4626-AF8E-4D3A39AA5DE0-57-00000008AA3DFC24.jpg
Isit right ?
Box fouling in 2 places antirollbar paet doesnt bother me it the chassis
http://i902.photobucket.com/albums/ac229/ryandocherty/8CE1935C-5415-4FAF-9F06-BF507DB7A2B6-57-0000000B9F61E0C2.jpg
chambers1984
08-10-12, 12:03 PM
you need to cut that bit of the box mate
Done it still the same were it meets the leg is that front mount defently right
http://i902.photobucket.com/albums/ac229/ryandocherty/D0B4E35D-144F-4DB6-85D6-14EB3594D817-154-00000023D0FCC9D9.jpg
paul080803
08-10-12, 01:38 PM
Use some ARB lowering blocks
Thats not the problem what so ever anti roll bar isnt the problem the gearbox needs to go toward the front of the car more to bolt the back mount on and it cant go anymore due to hitting the chassis leg mount
Thats as far forward it will go and the bolt is threw the bit behind the bolt hole and mounts hitting the builk head
http://i902.photobucket.com/albums/ac229/ryandocherty/E25BE2ED-2793-43F7-9550-CF47BBE4F848-252-000000333870036C.jpg
paul080803
08-10-12, 02:55 PM
You need a 3 hole mount for the stabiliser mount.
David Dixon sells them on here in the traders forum
chambers1984
08-10-12, 04:32 PM
it will fit mate get a little jack with some wood up against bulkhead and engine. and a bar in mount and play about moving it till bolt goes in. there not normaly that bad on std mounts. solid mounts are a bit of a pain
The mount still got another inch to go forward towards the front of the car but seems imposible
Due to this
http://i902.photobucket.com/albums/ac229/ryandocherty/D0B4E35D-144F-4DB6-85D6-14EB3594D817-154-00000023D0FCC9D9.jpg
http://i902.photobucket.com/albums/ac229/ryandocherty/9BAA850B-DC9C-4DF9-9766-142D5D51FEB8-480-0000005B6128754D.jpg
Its actually starting to bend the chassis mount forks its pressing that hard image if a do get the bolt in you couldnt drive it with the box pressed against the chassis
Do u get a pre and post front gearbox mount must be the wrong one ?
http://www.v-tuning.com/Kit_Parts_Seperately.htm
I had to slackn off the bolt goin threw the front mount because it would have cracked the nox it was pressin against it that much
chambers1984
08-10-12, 08:03 PM
is the rear mount defo a nova one. not a corsa one
I couldnt say 100% but its the one that came off the 1.6 that was fitted in previously
Whats the difference in the corsa/nova reat mount
chambers1984
09-10-12, 10:59 AM
the corsa mount is a little longer.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.