PDA

View Full Version : Oil catch tank and a few other problems


Vausey
08-09-12, 08:16 AM
Engine: 2ltr Redtop. (c20xe i think)

Hi how do in hose up a oil catch tank on
Standard tb.

Also where does the Little black plastic hose with the red l shapes end connect to.

A diagram of the breather pipes location would be spot on thanks rob
Iain
08-09-12, 10:09 AM
What engine?!
Vausey
08-09-12, 10:13 AM
sorry that would have helped its a c20xe
Iain
08-09-12, 10:18 AM
Take the thicker of the 2 on the back of the rocker cover to the catch tank and blank it off on the tb. Plastic pipe sounds like brake servo assist?
Vausey
08-09-12, 10:22 AM
no its much smaller than that id say its got a 2mm internal dai ( think its for fpr as i dont have one :s)

and ok sounds simples do i need to do anything with the smaller breather pipe?
Iain
08-09-12, 10:36 AM
I left mine attached to the tb.
Vausey
08-09-12, 10:37 AM
i have these 2 in my pic that dont connect to anything.

these are on the tb

http://i177.photobucket.com/albums/w221/djvausey/photo.jpg
Iain
08-09-12, 01:55 PM
Just had a look at mine for you. The left one is blanked off on mine, and the right one goes to the FPR on the fuel rail.
Vausey
08-09-12, 09:53 PM
Okcheers pal i dont have a fpr do u know what i can connect it to to blank it off or make it seem its on a fpr