View Full Version : Oil catch tank and a few other problems
Engine: 2ltr Redtop. (c20xe i think)
Hi how do in hose up a oil catch tank on
Standard tb.
Also where does the Little black plastic hose with the red l shapes end connect to.
A diagram of the breather pipes location would be spot on thanks rob
sorry that would have helped its a c20xe
Take the thicker of the 2 on the back of the rocker cover to the catch tank and blank it off on the tb. Plastic pipe sounds like brake servo assist?
no its much smaller than that id say its got a 2mm internal dai ( think its for fpr as i dont have one :s)
and ok sounds simples do i need to do anything with the smaller breather pipe?
I left mine attached to the tb.
i have these 2 in my pic that dont connect to anything.
these are on the tb
http://i177.photobucket.com/albums/w221/djvausey/photo.jpg
Just had a look at mine for you. The left one is blanked off on mine, and the right one goes to the FPR on the fuel rail.
Okcheers pal i dont have a fpr do u know what i can connect it to to blank it off or make it seem its on a fpr
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.