View Full Version : nova mk1 LET
lots of free time atm so stripped bits off engine got them painted and back on also swapped chrome work off the redtop and put it onto turbo, fitted painted rocker cover and belt cover all ready for it going in.
also ive got a flat flywheel to fit along with a new clucth, so will get that fitted probs start of next week then i need a gearbox will either be f20 or f18 see what comes up first really.
pik of engine now....
http://i305.photobucket.com/albums/nn232/seth171708/181117_3973394166233_655757988_n.jpg
well got most of the engine built up just to see if everything is there for the big day and it looks like it is, been getting my head around the wiring and with the engine coming out of a corsa it has made it a bit harder as its al ready been cut and an ignition live fitted to the loom, i think ive just about got every wire i need to join but i doubt i can keep the plug and play i had with the redtop, but anyways got the engine almost ready, put a flat type flywheel and new clucth on it as there meant to be better, which is understandable as its just a touch lighter haha. only the brake servo left to come out of the engine bay as well as rack but that will have to stay in until its towed to the paint shop. ive been trying to hide wires as well as i want noithing in the engine bay so all light loom has been ran down the passengerside wing and engine harness is now coming thro behind the engine instead of near the battery plus it keeps all my connecters in the car so stops them from getting wet
http://i305.photobucket.com/albums/nn232/seth171708/302402_3985489028597_1383518087_n.jpg
http://i305.photobucket.com/albums/nn232/seth171708/427116_3985487908569_836967126_n.jpg
http://i305.photobucket.com/albums/nn232/seth171708/314060_3985490428632_183664882_n.jpg
http://i305.photobucket.com/albums/nn232/seth171708/205344_3985492428682_1552003588_n.jpg
http://i305.photobucket.com/albums/nn232/seth171708/553445_3985491708664_1722415374_n.jpg
going to get a f20 gearbox later on today so get that cleaned up and painted then that just leaves more work on the car
Nova-nation
31-07-12, 10:37 AM
Good project! Love the look of your nova! Good luck
novalovingned
31-07-12, 01:16 PM
Love the interior and brown rocker cover :)
Nova-nation
31-07-12, 01:38 PM
Just seen the wheels you've got, of you wanna make a lot of money there is about 5 people on here looking for them, they are irmscher wheels, very rare and worth a lot!
Southie
31-07-12, 02:16 PM
Nice cheap paint job ;) Looks to be a good one though.
Your car would have originally looked like this btw.
http://i438.photobucket.com/albums/qq105/simon1867/HPIM0744.jpg
http://i438.photobucket.com/albums/qq105/simon1867/HPIM0745.jpg
NOV4_SPORT
31-07-12, 02:26 PM
That's looks really smart I this a lot, all the best with the project
Iain
ooo i doubt i will sell trhe wheels, and i love that cut off of the original club, i had been told it should have white bumpers and might get theses ones done, the car did have the black bits on thepillars when i first got it i presumed theyd been added by someone, really happy to see what it should be in its standard guise, and ive never seen this interior before, hope its one of the only ones left!!
also i now only need a single v pulley and i can put engine in!!
alexmyers000
01-08-12, 06:06 PM
nice project mate i can get your twin v machined if you want?
Really like the banded? Astra wheels... Nice project.
nice project mate i can get your twin v machined if you want?
thanks mate, if you were closer to me it myt have been worth it, ill just keep a look out for one up my way!
going on holiday for 2 weeks today so progress has halted....
engine bay has been stripped all the way back and paint taken off so when i get back welding and engine bay paint will be happeneing then to put engine in
cant wait
The f18 won't last that long I wouldn't have thought,
Although my mate got a v6 on an f18 and that's been fine,
I blew an f20 on a phase 1 let in about a week of driving :(
Went for an f28 in the end cause I got a bargain
NOV4_SPORT
21-08-12, 03:10 PM
Good stuff mate, quite like the red parts against the white of the body keep up the good work
scorge01
24-08-12, 10:00 PM
Looking good mate also liking the red running gear wish I had mines done red now :(
Cars still in the paint shop. Hopefully have her back soon changed a few things like omp racing steering wheel and fitted rev counter cloks shudnt b too long I hope
What do people think if I get my new wheels painted white like the car, can't decide myself but really think it will make the car look very clean
What do people think if I get my new wheels painted white like the car, can't decide myself but really think it will make the car look very clean
Your car dude but personally i like the wheels as they are, think they look good against the white
Had my wheels painted white inside and out think they look really nice hope they suit the car. Here's a couple of picks
http://i305.photobucket.com/albums/nn232/seth171708/55A6EF84-EA2E-4663-9E6B-BCA3BDA66F79-344-00000095F8BF3308.jpg
http://i305.photobucket.com/albums/nn232/seth171708/01AC5A97-C0CE-4B94-AA16-0668886DD2A3-344-0000009605CF5AE8.jpg
Been trying to put a digi dash in the car and was told it wouldn't fit in the mk1 dash so this is my effort and it looks decent tbh quite pleased with it took a bit of cutting and modifying of the heaters but I'm sure it wil all work once in the car, also got the engine on the hoist to get sump off and clean out oil feed and return just to be on the safe side, car shud be bk by next weekend so should get engine in next week can't wait.
http://i305.photobucket.com/albums/nn232/seth171708/D64A76D0-31B3-4AE4-B8D0-9F626E2C6487-760-000000E1AEF1F66F_zps9764798b.jpg
http://i305.photobucket.com/albums/nn232/seth171708/AD4B2D03-37AB-4D63-A13E-6EA9EE498733-760-000000E1A6A6656D_zps92d17048.jpg
http://i305.photobucket.com/albums/nn232/seth171708/5C0783CD-AA00-4F96-98FB-AD370272AD7A-760-000000E19EE91A67_zpsb8993c37.jpg
I'll have a spare dash as well if any one needs one so may sell it at the right price
Wey engines in and dash is out, started early on sat morning I've also extended all my lights loom to under the wing and u can notice there's no grommets in the top of the firewall and all starter wires are hidden and I've also ran the engine loom into a lower hole in the firewall so it's out of sight still a long way from being finished but happy with progress so far. Few pictures
http://i305.photobucket.com/albums/nn232/seth171708/BBEECDBB-55F1-4473-BD36-31DCA959A88D-1666-000001246F455557.jpg
http://i305.photobucket.com/albums/nn232/seth171708/78BCEF7A-4C0D-4FCA-9245-7C304F5266AA-1666-000001247548EECF.jpg
http://i305.photobucket.com/albums/nn232/seth171708/DF6721A2-F6F3-48F6-88AB-3231AC96F2F1-1666-000001248E2F1A9D.jpg
http://i305.photobucket.com/albums/nn232/seth171708/11826AE8-037D-4DC1-8D33-83F4698D6874-1666-0000012468AEDF0A.jpg
http://i305.photobucket.com/albums/nn232/seth171708/75293FA7-F82E-432C-9DCB-6323DEC956E8-1666-0000012461A937DF.jpg
http://i305.photobucket.com/albums/nn232/seth171708/27368B67-4E2D-4BE7-B3A5-4E4AF5113C17-1666-00000124971EAAB1.jpg
http://i305.photobucket.com/albums/nn232/seth171708/77A24F87-E814-4D7B-B2DD-3B05BA37F754-1666-0000012444F3FCFC.jpg
http://i305.photobucket.com/albums/nn232/seth171708/B7715571-C8D4-4D0A-AD2C-72463CE82153-1666-000001244CBF646E.jpg
Looks great dude, where did you run the engine loom thru then? Is that the ic in place? Does the rad still fit in? Bay is nice and tidy.
Thanks mate and its going thro the blank next to the brake pedal, and other wires for the battery are going thro holes in under the blower motor cover so should be pretty well hidden
And no mte still need to sort intercooler and rad out I'm going to have a bit mess about tomorrow to see what I can do
Progress looks great. Just read the whole project, some top work in here.
Thanks mate I'm trying to make it a special one
Looking good mate busy doing the same with mine but without the LET! Will be interesting to follow this wip! :thumb:
Thanks mate and its going thro the blank next to the brake pedal, and other wires for the battery are going thro holes in under the blower motor cover so should be pretty well hidden
Ah nice. Good work.
Thanks again lads, Novas are still pretty new to me so trying to make it a bit different to the rest , hopefully have it somewhere near running by next weekend, what do people think of a corsa c header tank? Or is there any other options for a small header tank? Cheers
Got it cranking today and chekd lights were working after extending the loom, also wired the digi dash in and it all seems to be working
BENDOGGER
02-10-12, 06:27 AM
Be good to see how you mount the cooler as i run the same bumper in my mk1 and dont wanna cut the front panel but i do wanna change from charge cooler to a intercooler get so up close pics if you can will give me some ideas cheers mate
If you want a front mounted ic, cutting the front panel is the only way really.
what do people think of a corsa c header tank? Or is there any other options for a small header tank? Cheers
I use a Corsa C tank mounted up in the scuttle tray. Works perfect and has two inlets so its the perfect fit.
Thanks lads I'm going to try a different cooler as this ones too big I think, and yeah going to get a tank from the scrappy today just to see how it will fit
Very cool project, glad you left corsas behind for a nova!
One thing though, and maybe its just my eyes, but there's no mention of seam welding the front end or any kind of strengthening? Novas aren't as strong as corsas and really can't handle this sort of power for too long.
Thanks mate and its all been done whilst it was getting painted sorry I forgot to mention that, but yeah it's all seen welded and had a full new front panel before Christmas aswell so should be strong enough I think
Having trouble getting this intercooler and rad in they myt have to e touching which seems to be the only way, gt a few new bends to try and see if I can do anything with it. I suppose its not the end of the world if there touching just asking as its not touching the turbo, my lightened bottom pulley arrived today so ill get thy fitted at the weekend
BENDOGGER
04-10-12, 06:23 AM
Having trouble getting this intercooler and rad in they myt have to e touching which seems to be the only way, gt a few new bends to try and see if I can do anything with it. I suppose its not the end of the world if there touching just asking as its not touching the turbo, my lightened bottom pulley arrived today so ill get thy fitted at the weekend
Get some pics up mate be interested to see this
SimonTW
04-10-12, 09:08 AM
Really nice build. The wheels look ace! How much of a pain was the digi dash to fit on the Mk1?
Really nice build. The wheels look ace! How much of a pain was the digi dash to fit on the Mk1?
Cheers mate, and it was ok to be honest I had to blank one if the heater pipes off on the back of the dash and cut away quite a bit, I then had to fix the digi dash into the dash I've had it bin the car and it looks good, bit of patience and its a doddle
Get some pics up mate be interested to see this
I will get more picks at the weekend mate
Been buisy all day today aswell got all water pipes made up apart from top rad one, going to have to do a scrappy run and see what I can find, also got all vacuum pipes on and just generally finished stuff off, when I had the redtop in the brakes were poor to say the least so I've fitted some other 2 litre callipers and put my braided brake lines on , I bled the rears up aswell as I hadn't done that since fitting the back axle, here's some piks
http://i305.photobucket.com/albums/nn232/seth171708/8E5190B6-E7EB-4A57-8AF2-6DF85F8F6D05-7251-000006B7D83B995A.jpg
http://i305.photobucket.com/albums/nn232/seth171708/508BBCB9-9551-4558-A099-1DA1D7B20C03-7251-000006B7DE455D49.jpg
http://i305.photobucket.com/albums/nn232/seth171708/6A53AAE3-2E7C-4035-8E88-8711F1CEEC09-7251-000006B7C984D6EB.jpg
http://i305.photobucket.com/albums/nn232/seth171708/76EAB552-253F-4132-8C21-508A88F9E7AE-7251-000006B7E9E323FE.jpg
http://i305.photobucket.com/albums/nn232/seth171708/22C33907-7EB3-4D6F-85F3-F6AF91991A99-7251-000006B7C2657750.jpg
Quick one of the digi dash working aswell
I know you said the wires for the ecu went through the blank next to the brake pedal and the battery wires next to the blower motor is there any chance you could stick a couple of arrows on your pics or even take a pic of the wires so I can see exactly where your running them? also did you have any problems with clearance of the brake pedal? Looking sweet though see your getting there now! :)
Yeah getting there mate, it would be finished if I had more time and doing it all myself takes time but I'd rather it that way as I know it's all done right, and yeah mate I could post a picture but my wiring may be different to yours as mine had a redtop in before, and yeah plenty clearance from brake pedal mate I'm making sure everything is tucked away and held out the way of Any moving parts
BENDOGGER
06-10-12, 09:32 PM
whats details on the cooler mate which one have you use and have you got it in without cutting anything?
If so be nice for some details and close up pics can email them me if thats ok with you
http://i305.photobucket.com/albums/nn232/seth171708/508BBCB9-9551-4558-A099-1DA1D7B20C03-7251-000006B7DE455D49.jpg
Is it just me or does the engine look way too high on the offside there, i think you might have the bolts in the wrong hole in the mount there tbf, it should be more level to the slam panel should it not?
Ner engine sits sweet mate might look a bit cok off on there because I have that mount loose to get the crank pulley and alt belt on
And as for the rad and cooler I have just used the frontera cooler and gsi rad but cut all the mountings off both and I'm just going to have them held in place by the pipes connecting to it for now until I find another solution not the best I know but it means when the engine moves the rad does so its not hitting off each other not ideal but best I can come up with at the moment
Ahh furry muff mate, wasnt trying to cast dispersions on your build, was just wanting to point it out in case it was wrong so you could correct it :thumb:
None taken mate I should have said that I had also fitted that today haha but I've done loads today so really cudnt get it all in lol, thanks for looking
No worries mate, just wanted to make sure you didnt think i was just being a keyboard penis lol
Yeah getting there mate, it would be finished if I had more time and doing it all myself takes time but I'd rather it that way as I know it's all done right, and yeah mate I could post a picture but my wiring may be different to yours as mine had a redtop in before, and yeah plenty clearance from brake pedal mate I'm making sure everything is tucked away and held out the way of Any moving parts
Sweet cheers mate! It's a redtop I'm fitting now and still got the bay in the prep stages so would pay to get the things right now before i paint it! :)
Yeah mate ill get piks during the week for ya then
christurboo
11-10-12, 03:09 AM
looking good joe pal, unsure on wheels but its good to be diffrent and defo needs a 1 piece front bumper to finish it off.
and as scott would say its a SHED!!
Whys the bonnet up at the back, looks great apart from that.
I've raised the bonnet at the back and I like it lol
Had it running tonite! Buzzing but a lot to do on Saturday need to make a list!! But over the moon
I love everything bar the bonnet raised up and the orange indicators. Really simple and clean look. What size are the wheels? Impressed you've got the ic to fit in front of the rad like that. Rad not touch the turbo?
http://i305.photobucket.com/albums/nn232/seth171708/C93B2B4E-3D9B-4049-ADE7-8CDA4828E589-11834-00000AD69446FB67.jpg
Is the intercooler held in place with electrical tape?? Like the wheels :)
yellow_seh
11-10-12, 07:01 PM
It does indeed look like the inter cooler is taped to the rad :s and yes these wheel are awesome.
novadave24
11-10-12, 07:48 PM
that is nice mate :thumb:
I love the orange indicators mate i have clear ones but hate them in and I love the bonnet up makes it look a bit meaner and gives room for the vacuum off the dump valve and fpr, wheels are 15" mate 7j with Bridgestone 165 50 15 tyres
And I trimmed bits off the back of the bumper and grill so it all fits in mate bout half a cm off the turbo
Yeah rad was held to intercooler by electrical tape whilst I mocked it up!
Did you manage to get them pics up mate? mines prepped now and ready to paint! obiously I would like to get any holes for the wiring drilled before I do that! ;)
Which ones u wanting pal? I drilled 2 either side of the heater blower motor going into the car, then one just above the indicator on passenger side behind the wing so I could run lights loom out there and drilled a hole at the end of the slam panel so I could hide wires under the slam panel
Was after knowing how you got the wires from beside the heater motor into the engine bay ( wires from the battery to the starter and the main engine harness to the inside where the ecu is.)? Did you just drill straight through the firewall panel either side of the heater motor or did you have a better plan than that? lol
DAVIDKEDENS
15-10-12, 10:52 PM
Should get a video of it taken from inside, looks brilliant mate.
I've got an original swing front bumper in white if you're interested?
Yeah mate just drilled It out and got some grommets to fit, the wires run down then holes then into the engine bay through the hole where all wires run thro, the one which is a blank for the brake pedal
Well a was out in it Sunday night and it flies lol Propa fast little thing, it's surprising how much better it accelerates than a valver lol , really happy, stil lots to do but getting there, also my tax runs out at end of the month so doubt il renew, still there'll be lots of updates over winter
christurboo
19-10-12, 01:32 AM
see this on sunday at the vally why no grill?
spot on motor as always joe ;)
Grill wouldn't fit with cooler behind so sacked it off, but just bought a one piece front bumper for it, and cheers jed
cheers Joe :thumb: That's spot on should be able to crack on with mine now! ;)
christurboo
19-10-12, 06:47 PM
should look 100% better with one piece. thought about makeing the bumper a sport rep with the white flashes?
novalovingned
19-10-12, 07:23 PM
I totally forgot about this wip. Nice job mate. You also have very good taste on how a mk1 nova should look :) meet your novas older brother lol
http://i148.photobucket.com/albums/s3/novalovingned/nova-2.jpg
Thanks lads! And no to the sport rep, I'm not really into replicas lol I was thinking when I've had some fun in it and had it the way I wanted it for a while ill try and put it back to near original club spec with the white bumpers and everything but that's the long distance plan. Looks cool that ned u gt a wip?
novalovingned
22-10-12, 08:57 PM
Yeah it's called "the last chance mk1 project" stick it in the search I'm sure it comes up mate :)
Anyway, keep up the good work. Looking forward to seeing some more progress.
Off the road now as the tax has ran out but still loads to do for getting it ready for the shows next year, ill get photos up of everything I do, dash is currently bak out aswell as pedals and steering column all so I can tidy my wiring up more, trying to get some teardrops off a mate or even paint mint unsure what to do yet and then get digi dash back in and finish off under the bonnet, then hopefully get a few bits touched up off my painter after Christmas!!
When's and where is the first show of the year as I plan to rack the miles up in this
BENDOGGER
13-12-12, 09:20 PM
Looks sweet mate, would like some more info on how you mounted the cooler without it showing and cutting the front panel.
Looking good tho mate
Very impressive hiding the cooler that well. looks great.
The way I've hidden the cooler behind the bumper is with a one piece front bumper with the bumper bar taken out and trimmed the back of the grill and bumper so that the cooler sits in the back of the bumper and the bumper can go all the way on
Had a half a day on the nova again today. My mate turned up in his xe nova which is the engine out of mine. And I tried my digi dash in his car and it was all working so plugged it back in and got rev counter working in my car then I gave it a polish to keep it shiny. Some piks anyway
http://i305.photobucket.com/albums/nn232/seth171708/7270BDF4-A9A3-4BAF-BA39-09E26F7DD55E-692-0000004D093852FE.jpg
http://i305.photobucket.com/albums/nn232/seth171708/951D98C5-309D-4B44-A5F4-D496927405A8-692-0000004CFE3B70F1.jpg
http://i305.photobucket.com/albums/nn232/seth171708/B92BE1BB-858E-4F0F-8CB9-F738BE2DDE58-692-0000004CF6435477.jpg
Notice how my cars getting closer to the road
LEWI007
15-12-12, 07:40 PM
Is that david watsons nova ?
its got my old mk2 rear bumper on it lol
Yeah it's daveys! It's a sweet nova lyk
loving this and i usually hate bigblock stuff top work fella
Rick
Yeah it's daveys! It's a sweet nova lyk
loving this and i usually hate bigblock stuff top work fella
Rick
Thanks a lot mate! Appreciate it
Do you guys have any stands at shows this year? And what are the requirements for getting on them? Thinking of going to the fast show, Pvs, USC, and billing this year
The only requirement is the be a club member which is a tenner, then you'll get all the info for the shows. Obviously you still have to pay for show entry, but stand pass' are free. The club is normally at Billing and PVS, not sure on the other 2 though..
Yeah ill probs become a member, and yeah Thanks for the info mate
Few general pictures there aswell
Does the rev counter on the dash not work?
Yeah, u can see it grafting in one of the piks, when it had the redtop in I didn't use a digi dash I just left the standard clocks in so I bought that rev counter then and seen as I had it still I thought I might aswell fit it, seems a bit pointless I know but it was there doing nothing so might aswell fill a hole with it mate
I really like this. I like how you've hidden the wiring etc.
The interior is cool too, it's different. Keep up the good work and keep us updated
Thanks! Yeah I try to take piks but always forget during piks, the thing with this is I've done everything myself well apart from paint it.
Yeah mate, that's what's good about it. Another built not bought, in a way it's insperational. It will be good to see in the flesh next year.
Yeah can't wait to drive it mate makes it all worthwhile, and the fact it's built on a pretty decent budget aswel I don't think the car owes me 2 grand yet and that's inc the 500£ wheels
BENDOGGER
30-12-12, 05:27 PM
Alright looking good are you running an oil cooler with the engine or not if you are where have you mounted it
woodyjay
31-12-12, 12:18 AM
Fat mate
brainsnova
31-12-12, 12:49 AM
When I put a digi dash in my old mk1 I cut the shape of the speedo out the dash so the bottom sat behind the lip and fitted tight all round, I had to alter the heater duct to get the digi dash in place
Alright looking good are you running an oil cooler with the engine or not if you are where have you mounted it
No oil cooler mate, I've spoke to a few people and they say its not really needed with the setup I'm running
Yeah that's what I don't with a the heaters aswell I blanked one side off I need to fibreglass the gaps up on each Side of mine just to tidy the job up a bit
andyredtop83
01-01-13, 08:24 PM
I like the mk1 sleeper look with a let hiding under the bonnet, good work mate :thumb:
Thanks mate!!
Wel should get MOT on it this week, ordered some new number plates which came so I got them fitted. All lights are working. Also I've bought some irmscher softstars with 40 profile tyres in original silver so they should smarten it up a bit, the steelies are forsale aswell as a set of 5 cesaros if anyone is interested
Thanks joe
brainsnova
02-01-13, 02:07 AM
Yeah that's what I don't with a the heaters aswell I blanked one side off I need to fibreglass the gaps up on each Side of mine just to tidy the job up a bit
I done it with no filler ,fibreglass or paint but you have to be precise when cutting. If I still had it now I would flock the dash :thumb:
Yeah I didn't really have a precise cutting tool that I could use so that is how I'm going to have to do it, if I do it again il take more care, thanks buddy
Just bought some window surrounds and I'm I sure on weather to fit them or not what do people think? Also spoke to a painter about getting my bumpers untextured and painted either anthracite or a similar grey? I think it wil be good as it will tidy the bumpers up as there looking a bit old. Any ideas what I should do, thanks joe
brainsnova
02-01-13, 04:39 PM
Rover hurrricane grey is a nice bumper colour
There some some really nice greys that Nissan and Toyota do.
Yeah we've had a look at a few colours and I think it will be a good upgrade to the looks of the car
BENDOGGER
04-01-13, 05:04 PM
I like mate i really do. If you get shot of the softstars give me a shout
I will sell them mate would like about £240 for them
womble sri
04-01-13, 05:40 PM
I like the softstars but I did think the cesaros looked particularly good on this and I'm not normally a fan of them
womble sri
04-01-13, 05:45 PM
Think I have confused it with the older brother lol
Yeah I think you have mate, ive got some cesaros but they have never been fitted haha
Nice on the mot. Not sure if it's the pic or not, but the rear looks really high...
Yeah I'm happy haha, it's got Gaz coilovers all round mate so I've just wound them all up a bit so I can drive it properly rather than having to slow right down at every lump in the road haha will be back low for the shows
conza123
12-01-13, 11:33 PM
Just saw this on facebook hope your ok
http://sphotos-b.ak.fbcdn.net/hphotos-ak-snc7/480964_10152427266735788_1709849956_n.jpg
oh dear hope your ok pal?
christurboo
13-01-13, 12:12 AM
hes fine, punto pulled out on him i heard?
conza123
13-01-13, 12:15 AM
hes fine, punto pulled out on him i heard?
it did but hes fine
but the car if F***ED and he striping and scraping it acconding to his fb comments
novalovingned
13-01-13, 12:53 AM
That's a real shame :(
brainsnova
13-01-13, 01:43 AM
That's a real shame :cry:
its a sad day :-( another one gone glad the lads are ok though only been on the road a few weeks aswell
and i never got my shotgun ride :-(
kevster
13-01-13, 09:35 AM
Glad everyone's ok , gutted about the nova , hope he gets another .
Aye that's the crack lads, gutted lyk but best thing is no one was hurt!
kevster
13-01-13, 10:11 AM
Feel for you bud , know what it feels like!
Fuuuck, glad your ok man!
I would lose the rag if someone pulled out on me after all that hard work.
womble sri
13-01-13, 11:07 AM
This makes me wanna cry for you, don't lose hope bud!
Thanks lads appreciate all the worry, really gutted
Also insurance has let me keep the car so I can sell the bits of it of anyone is interested just comment in here il be keeping the engine tho
kevster
13-01-13, 05:44 PM
How much for drivers door , boot lid ?
kevster
13-01-13, 05:44 PM
Or even compleat shell .
bazzap8389
13-01-13, 05:50 PM
That's a shame, gutted for you pal
Won't sell shell it's being scrapped as beond repair and bootlid 40 and doors 30 each and wing 20 interior 200 all glass with reg carved in 50, rear window surrounds 20, white bonnet not in pik 15, all other bits aswell just ask
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.