PDA

View Full Version : c20xe cream injectors on a c16xe ......



boyd_1989
28-07-12, 02:14 PM
Just wondering... My friend said he got told to put redtop cream injectos on his 16xe is this a good upgrade? Or will it not affect it? I may try it anyway but just thought I'd ask incase anyone has already tried... Thanks

burgo
28-07-12, 02:45 PM
Epic fail IMO. With how old they are there is no way they can be a better spray pattern so no "upgrade" there and as they are bigger will probably just over fuel it.

paddy235
28-07-12, 03:26 PM
terrible upgrade,made it worse on a mates 16xe

burgo
28-07-12, 04:10 PM
That's because this isn't forza, simply changing injectors very rarely gets an improvement, especially on a N/A

phazer
28-07-12, 05:35 PM
Total waste of time and effort. You'd have to back the fuel pressure off so much it'd be a right mess.

To put things into context. I'm running an X16XE on throttle bodies and my injectors at 150BHP are just starting to run out of duty cycle - unless you're massively modified there is no point, if you need to go beyond 150Bhp (genuine by the way not pub bhp ;) ) then there are better injectors than the old cream ones.

boyd_1989
28-07-12, 08:55 PM
Thanks for comments.... I just didn't know and heard that It could be better but as for your comments I think ill just leave them as they are. Thanks

scott.parker
30-07-12, 12:49 PM
Would it be worth going to let injectors if turboing a x16xe?

Southie
30-07-12, 02:41 PM
Would it be worth going to let injectors if turboing a x16xe?
Best asking Craig Green what he used Scott. ;)

Edd
30-07-12, 02:46 PM
Craig had standard injectors on both his e16se and c/x16xe turbo lumps

Dayle_
31-07-12, 07:11 PM
Phazer what have you got the final rev limit set at on your DTA? Just curious because of a message I got on ours. Any more revs than 6900rpm and it basically pops up a fail safe box.

It states the engine would require more fuel at WOT and 6900+ i.e injectors would not flow enough although we are only running standard C16XE injectors with velos torque tube.

phazer
01-08-12, 03:19 PM
I'm running 7700 soft cut with hard cut at 7800 or 7900. What colour are your injectors and what fuel pressure are you running?

boyd_1989
02-08-12, 11:47 AM
Hi all... I didn't fit them, but sold them to a friend with a x14xe so he fitted them, he said they made a differance.. But only from 6000rpm + and was really lumpy at idle. He was really happy though as he gets some good flames lol.

pie
02-08-12, 12:53 PM
lol pistons aint gona last long then f lol lol

phazer
02-08-12, 12:57 PM
mmmmm bore-wash tastic