PDA

View Full Version : inline fuel locations on carb models


conza123
26-07-12, 12:15 PM
as above show me your stuff
marc69
26-07-12, 12:25 PM
look through my threads on my track car, any internal pics. basically from above the tank through between the seats up to the hole for the heater hose.
conza123
26-07-12, 03:01 PM
look through my threads on my track car, any internal pics. basically from above the tank through between the seats up to the hole for the heater hose.

have u got link as cant find and any others
marc69
26-07-12, 06:51 PM
http://www.pngclub.com/forum/showthread.php?186559-bumper-bar-removal-and-perspex/page2

You should see pics of the interior there if I have managed to paste a link?
conza123
26-07-12, 07:53 PM
Thats not what im looking for as its for my sr and i dont know where to stick it so it aint in the way or rattles
mowgli
26-07-12, 08:43 PM
what are you on about, an inline fuel pump?? or fuel lines??

basically if you are still on carbs, the std mechanical one is fine.
conza123
27-07-12, 07:17 AM
what are you on about, an inline fuel pump?? or fuel lines??

basically if you are still on carbs, the std mechanical one is fine.

Sorry i missed out the work filter sorry
AndrewJenkins
27-07-12, 07:20 AM
i put my filter between the mechanical fuel pump and carb works a treat and easy to change
conza123
27-07-12, 09:29 AM
i put my filter between the mechanical fuel pump and carb works a treat and easy to change

have you got a picture
mowgli
27-07-12, 09:47 AM
i used to put them on the inlet pipe before the pump, that way, the pump doesn't suck too much nasty stuff in, no pics as i've been efi since 1994, i simply cut the rubber hose a couple of inches above the nylon pipe & jubilee clipped it in place
AndrewJenkins
27-07-12, 06:02 PM
like mowgli says just cut pipe and insert filter ill get a pic over the weekend if needed
marc69
27-07-12, 09:12 PM
I also just cut the inlet pipe that goes between the inner wing and pump. I fit the cheap clear flters so I can see when it needs changed.
conza123
27-07-12, 11:29 PM
Have you made a bracket for filter as minw rattels abiut abit
mowgli
28-07-12, 07:32 AM
mine were simply up in the air so they didn't hit anything.
AndrewJenkins
28-07-12, 09:08 AM
mine is held by the dip stick lol was going to make a bracket but that works lovely lol