View Full Version : Splitter!!!
DUNOVA.
01-08-03, 10:46 AM
Ive posted on the other topic about splitters but just got ignored :cry: Anyway doe's a luguna splitter just go straight on or do you have to mess about with cutting and stuff.Cheers
?Marty?
01-08-03, 04:58 PM
You will have to modify the laguna splitter to fit.
Basically you will have to cut/remove little 'v' sections around the curves/corners of the splitter, so that it can be bent to follow the curves of the bumper.
Some people:
1- cut the splitter in half,
2- mark the center of their bumper,
3- cut little v's out of the splitters edges (top and bottom, so they can't be seeen),
4- then fit the splitter, starting FROM the center of the bumper(make sure the end of the splitter is inline with the center of the bumper), curving it round to follow the line,
5- trim the excess at the end.
Then use the second piece of the splitter, join it up with the other and repeat.
mine fitted straight round just had 2 trim the excess off at each end but it was a piece of piss 2 fit
DUNOVA.
02-08-03, 12:15 PM
what do you use to fix it on?how much can you pick them up for?
i used 6mm roofin nuts and bolts and mine cost me ?8 from scrap yard
DUNOVA.
02-08-03, 07:03 PM
cheers for the info
no worries mate if u cant find a laguna ive got a granada 1 4 sale email or pm me about it its a bit like the laguna but in 2 pieces
Nova-Boy
04-08-03, 08:36 PM
you can drill little holes and use self tappers which is easier.
Has anyone colour coded there splitter? What does it look like??
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.