View Full Version : Gearbox - Speedo drive query
Markd89
15-07-12, 06:10 PM
I bought an f13 gearbox from a corsa sport, i fitted the cable into the slot and the speedo wasnt working, i left it for the night. i started again this morning to find a big hole in the bottem of the gearbox casing ( the plastic cog had shot through the metal )
So i thought ok that must be why, i got a new casing and cog and re-fitted it. but when i wipped the casing off i noticed that there was no mechanical cog for the plastic one to seat in, there was only one with a few squares in.
Is there a way round this or do i have to get another box ? i've never seen it before and i've done loads of gearboxes.
picture :
http://i1236.photobucket.com/albums/ff445/markvtr/nova%20x16xe/IMAG0897.jpg
obviously the plastic style cog wont run on that.
pottersrebel
15-07-12, 06:19 PM
There should be another plastic cog on that metal ring i think? Im not sure if u can just fit another plastic ring to the diff carrier but there`s no need to get another box you just need a new diff carrier. i have one in an f15 corsa sport gearbox if you cant get one locally. Pm if you ever need it and ill strip it out of the box
Markd89
15-07-12, 06:32 PM
ive checked a spare f13 box i had before and there is a massive difference in the 2, the spare f13 has metal splines which arent removable unless the gearbox is removed as far as i can see, i havent looked fully into it as i just thought id post on here for advice on whats easier
thats a later f15 isn't it?
Markd89
15-07-12, 07:11 PM
it could well be as there isnt any marking on it, although it looks identical to the spare f13 i had, suppose i couldnt really tell unless i look at the internals.
Would i have to change the drive gear over ? if so is this hard to do as i have a spare f10 box with the mechanical speedo on or would it be just as easier to get a new box
That looks like it might be a ring for a hall sensor, so it may be a box set up for an electronic sensor. I've never stripped one down so I'm not sure how easy they are to swap.
Markd89
15-07-12, 08:32 PM
Apparently they run off the abs system, according to google.
I think it will be easier to source another gearbox,
thanks for the input guys
that is for an electronic set up had it on my gear box. all i done was take out the diff and removed it and got a mechanical cog and put that on in it place
scott.parker
15-07-12, 10:43 PM
that is for an electronic set up had it on my gear box. all i done was take out the diff and removed it and got a mechanical cog and put that on in it place
Interesting, i might need to this on my F15 as the X16XE engine its attached to is in a W plate Corsa B..
Markd89
16-07-12, 10:03 AM
I didn't even know there was a difference to be honest, first time I've come.accross it
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.