PDA

View Full Version : Nova bits & pieces for restro projects



Mike
15-07-12, 10:43 AM
Just found a box of little bits & pieces (all genuine may I add) that would be sweet for a restro project. ALL are used condition. £POA. Be dirt cheap anyway as its all just tat to me lol

Nova:

E16SE FPR
E16SE Idle valve, or could be coasting valve?
Central locking motor with bracket (pass side)
14NV genuine Bosch GM 7 pin ignition amp with alloy bracket. Inc amp, bracket, 7 pin with short length of wires & also the two pin plug that goes into the dizzy with length of wire.
E16SE Throttle cable L bracket that goes on throttle body x2
E16SE AFM pipe (two small cracks in it, could be super glued?)
Assorted pack of GM interior trim plastic rivets (1 a pillar, could of rear interior trim ones in dark grey, most are front door card black ones)
Steering wheel mount springs x2
x2 sets of front wing bolts (one white, one rusty chromed)
Front door lock black plastic circle trim things that go round N/S & O/S front door locks.
Front door lock clips that hold then into the door skins
Door lock cut out for weld in replacement on broken into door skins.
Front wing indicators pair off.
Headlight indicator attachment springs (pair off)
Box of assorted GM hose clips, fuel line clips etc (20 or so in different sizes from tiny to AFM hose size)
Sidelight bulb holders pair
Front indicator bulb holders pair

Corsa:

Wiper stalk
Single wiper conversion scuttle panel hole blank plate

Astra Mk1:

Old skool style tear dropped wiper stalk

Misc:

Set of used Bosch super fours done about 1k miles
10 pack of neporene lined P clips

paul james
15-07-12, 11:08 AM
"Bonnet stay location clip that goes in the bonnet"

I could do with one of these for my Nova, PM sent :)

Novasport
15-07-12, 11:52 AM
Can you PM me price posted on this please Mike...


14NV genuine Bosch GM 7 pin ignition amp with alloy bracket. Inc amp, bracket, 7 pin with short length of wires & also the two pin plug that goes into the dizzy with length of wire.


Thanks
Rich

reecegsi
15-07-12, 11:56 AM
Pic of corsa scuttle panel

Mike
15-07-12, 12:44 PM
Pic of corsa scuttle panel

Its not the complete scuttle panel, its the oval shaped blanking plate used when youve got a single wiper conversion to fill in the hole where the drivers side wiper would be.

Mike
15-07-12, 12:59 PM
Curtoise, this. Think its a coasting valve actually.

http://i80.photobucket.com/albums/j181/mikenova/e16se-1.jpg

Rich, heres the SR bits I got, will PM details now.

http://i80.photobucket.com/albums/j181/mikenova/14nv.jpg

Liam
15-07-12, 01:28 PM
Do you know if the single wiper blank plug would fit a Nova?

Mike
15-07-12, 01:40 PM
Do you know if the single wiper blank plug would fit a Nova?

Pass. Its an oval shaped piece of plastic. Cant remember what shape the holes are on Nova's.

Curtoise
16-07-12, 07:10 PM
mike thats the supplementary air valve! i need one is it operational do you know? you can check by applying 12v across the two pins and looking into the hole and making sure it closes slowly.

Mike
16-07-12, 07:40 PM
mike thats the supplementary air valve! i need one is it operational do you know? you can check by applying 12v across the two pins and looking into the hole and making sure it closes slowly.

I knew that lol lol

Ill check later and get back to you if its working or not :)

nova_sr_boi1991
16-07-12, 08:16 PM
how much for throttle cable and bracket posted?

Mike
16-07-12, 08:20 PM
how much for throttle cable and bracket posted?

I dont have a trottle cable for sale. Only the L brackets.

Mike
08-08-12, 06:58 PM
Up, before it all goes in the bin lol