View Full Version : Undersell removal
Does nitromourse remove underseal?
Want to give the floor a good check over but it's got a fair bit underseal on it
Novasport
25-06-12, 09:34 PM
If it's the original rubber type underseal then no. A heatgun or blow torch with a scraper may be in order. Grinder with a wire wheel will do it but makes a hell of a mess.
Nope its not original, I put it on
Wire cup on a grinder is what I usually use and as you say it is messy and I hate getting stabbed by flying wire lol
http://www.weldequip.com/cleaning-fleece-115mm.htm These rip through the rubbery stuff.
paul james
25-06-12, 09:41 PM
WD40 does a pretty good job of clearing that brush on underseal gunk (if thats what you mean), as does panel wipe which I use. Its always good to have a tin of panel wipe around, its so useful.
Yeah it's the brush on stuff that's on it
paul james
25-06-12, 10:53 PM
Yeah you don't want to be wire wheeling that horrible stuff! I slapped a whole tin of that underseal on my car, and regretted it when it came to actually working on the car, that gunk just gets everywhere because it never dries out.
kevos08
25-06-12, 10:53 PM
Petrol aswell . Triger spray bottle and spray it on just desolves it and comes of nicely aswell with a wee wipe. Handay like like panel wipe
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.