C20xe on r1 bike carbs!

[honie5]

Right chaps running a 1.6 cav dizzy and rotor arm but smashed the cap (this was a cap where the leads came out the side) and now been several time to allwoods with no luck getting the right cap I've now got an astra gte cap (terminals come straight out parallel to block) that has the metal in the bottom of each terminal (no pins) I tried frontera 2.2 leads but they were pin plugs not the push all the way in type if that makes sense! Can anyone help and point me in the right direction for the right leads as it's doing my nut in now!
Cheers dan

[Balley]

according to this dude you want rover 620 leads,

http://www.yorkshiredales.uk.net/forum/viewtopic.php?f=1&t=16985

[honie5]

Cheers dan will try those think I've had every lead off every car so far lol

[mk1nova_rich]

I take it Astra GTE leads are too short?

[Saloony]

8valve with the heat shields built into the head. Correct cable length and stem length to the plugs

[honie5]

Yer as I'm aware of as I can't seem to find any! Did the gte cap come with a pin type aswell as it might be easier that way as I've found a few leads that have the pin plugs!

[Saloony]

I have the ones for the non male ended dizzy cap.

[nova ian]

Are these any good to you?

Had them on my XE with bike carbs. Only thing with them is whoever had them made up numbered them the wrong way round! So lead number 1 actually says 4 on the lead!

http://img.photobucket.com/albums/v314/cruisindude/For%20Sale/Leads2.jpg

http://img.photobucket.com/albums/v314/cruisindude/For%20Sale/Leads1.jpg

and best pic I found with them on the car

http://img.photobucket.com/albums/v314/cruisindude/nova/IMG_0844.jpg

If so £25 posted