Gauging interest, breaking c20let corsa

[zx7r]

hi. over the next few weeks am going to start breaking my corsa as its time to say goodbye to her. some parts like pistons and crank will not be available just yet as its going to take me longer to break it down.

i do work shifts and long hours so please be patient, if i dont answer any questions straight away.

list will be updated when i get the chance as more parts are added.

payment via cash on pickup or paypal but you must pay there % fees or send as gift.
thanks for looking.
http://i276.photobucket.com/albums/kk29/fezzo2003/IMG_20120726_171556.jpg
new engine mount £17 posted
http://i276.photobucket.com/albums/kk29/fezzo2003/IMG_20120726_172006.jpg
new brake *fluid braided pipes (remote reservoir to mater cylinder) £15 posted
http://i276.photobucket.com/albums/kk29/fezzo2003/IMG_20120726_164415.jpg
f28 gearbox selector £15 posted
http://i276.photobucket.com/albums/kk29/fezzo2003/IMG_20120726_172055.jpg
corsa/tigra front tie bar poly bushes. bought new afew years ago and never fitted £27 posted



http://i276.photobucket.com/albums/kk29/fezzo2003/IMG_20120623_134230.jpg
corsa xe/let drive shafts and cv joints, NS outer cv boot has a small split so will need replacing £80


http://i276.photobucket.com/albums/kk29/fezzo2003/IMG_20120609_145944.jpg
http://i276.photobucket.com/albums/kk29/fezzo2003/IMG_20120609_150011.jpg
corsa gsi front bumper, modded for intercooler. needs repairing and painting £30





2x push type spal fans £30
http://i276.photobucket.com/albums/kk29/fezzo2003/IMG_20120604_142806.jpg
http://i276.photobucket.com/albums/kk29/fezzo2003/IMG_20120604_142709.jpg
10'' spal fan. 2 out of the 4 brackets are broke

11'' spal fan. 2 out of the 4 brackets are broken and the wiring could do with a tidy up

eds intercooler. 2'' inlet/outlets. core size is 60cm x 12 1/2. there are some holes in the outer skin for where brackets have been mounted in the past put the core is not damaged £50

Alternator £20
starter £15
top hat £10
inlet manifold £20
throttle body £20
knock-icv loom £15
turbo oil feed £20
muilt v alloy bottom pulley £30
rear engine water pipe £10




arp main stud kit £30
xe/let head with xe inlet cam £80
cosmetic 1.9mm head gasket £
type 2 engine mount kit with f28 mount and spacer and power steering pump £
later xe/let cambelt backing plate £

dizzy with Bosch cap £30
f28 gearbox. crunchers in 2nd and 3rd gear £100

coil £25
lambda sensor £20
cool running thermostat and housing and cool running fan switch £50
2'' boost pipes £35
square type bottom crank pulley £15
corsa b A post gauge pod £13 posted
288mm spigot rings £10 posted
autogauge boost gauge £12 posted
tie bar lowering kit for f28 gearbox £50
oil cooler kit £50


i do have more corsa parts so just ask if i havent listed anything you may need

[Edited on 11-07-2012 by zx7r]

[boomtings1]

Hi i would be interested in the rear GAZ coilovers if you want top split them.
Kyle

[zx7r]

Hi i would be interested in the rear GAZ coilovers if you want top split them.
Kyle

sorry mate but would prefer to sell as a full set

[paul080803]

What coilovers are they, and what colour are the pulleys? Are they round tooth?

[zx7r]

What coilovers are they, and what colour are the pulleys? Are they round tooth?
here's the coilovers that are up for sale, the front springs are a big poundage for the c20let engine, 275lb i think.
http://www.corbymotorsport.com/corsa-b-9300-gaz-coilover-conversion-kit-p-58.html

http://i276.photobucket.com/albums/kk29/fezzo2003/PICT1691.jpg
square tooth

[Plug]

Is the turbo a k16?

What condition is it in? Any smoke?

Price posted?

[zx7r]

Is the turbo a k16?

What condition is it in? Any smoke?

Price posted?
yes mate kkk16, been on my car 3-4 years, boost good and no smoke. £110 posted

[zx7r]

some photos added

[DuBsZ]

how much for engine, ecu loom ect? not after the gearbox..

[zx7r]

engine is being broken up. you can have ecu and loom for £160

[zx7r]

updated

[zx7r]

some items going on ebay

[zx7r]

up

[zx7r]

updated

[zx7r]

offers

[novalew]

have you got a set of clocks mate?

[Plug]

Is the alternator single v?

[zx7r]

have you got a set of clocks mate?

yes I have but there not standard corsa ones. there calibra turbo 160mph clocks with white dials

[zx7r]

Is the alternator single v?

yes single v

[Plug]

May have the altenator off you buddy on a price posted,

Joe

[novalew]

yes I have but there not standard corsa ones. there calibra turbo 160mph clocks with white dials


how much would you be looking for them with plugs and a bit of loom? are they electic speedo pick up or cable

[zx7r]

just uses the standard loom. the clocks aren't a standard fit, there is a bit of a gap and you will have to do abit of cutting to the clock surround if you want to make it look snug, i dint bother and lived with it

[novalew]

its to go in my nova so not sure if the plugs are the same? i know its not direct fit, but that will be cool

[zx7r]

I'll do the clock and the plug for £32 posted. I'll send you some photos later

[novalew]

cool cheers pal

[chip]

interested in the leads mate, how much posted to shropshire? cheers

[chip]

pm'd

[zx7r]

sorry chip, just sold them

[zx7r]

fao chip. gasket is used, been on the car 15000/20000 miles and is 1.9mm thick

[zx7r]

updated

[novalew]

still got the f28?

[zx7r]

yes mate. did you get the clocks ok?

[novalew]

yeah , just posted a pic in styling, stuggling to hide the gap but i'll get there, interested in the f28 just weighing up rebuild costs

[zx7r]

up

[zx7r]

up