View Full Version : ARP Con Rod Bolts
phunkynova
29-05-12, 04:57 PM
I've just got a set for my 1.4 NV engine is there any modification need doing to the con rods to fit these ? I have heard that you must do some work too them if so what and how ?
Thanks.
http://i995.photobucket.com/albums/af71/phunkferret/ARP%20bolts/ARPbolts001.jpg
Chamber the big end caps usually so the bolt heads sit right.
phunkynova
29-05-12, 05:35 PM
Sorry Adam, chamber the big end caps in which way ?
Royston
29-05-12, 05:45 PM
The bolt head to the threaded shank is radiused for strength, so needs a small champher for clearance normally so that it doesn't bind in the end cap
some bolts don't have the chamfer on them, my c20xe had none so they fitted in fine.
this might help
http://www.sbdev.co.uk/Info_sheets/ROD_BOLTS/rod_bolts1.gif
The bolt hole where the rod bolt goes through needs countersinking slightly, to allow the radius under the bolt head to sit correctly.
phunkynova
29-05-12, 06:26 PM
Thanks to you all that helps a lot :thumb:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.