Cams info

[sr-rompa]

Hi I'm thinks of buying a set of can but not sure whats the best ones I have a 2.016v with power cap group n chipped ecu decent manifold any suggestions

[swedge]

depends what pistons your using as valve-piston contact is very easy as theres no much room to begin with, best thing to do is get aftermarket pistons or get your standard ones machined which is what im gonna do on myh build

[Stuart]

Hi I'm thinks of buying a set of can but not sure whats the best ones I have a 2.016v with power cap group n chipped ecu decent manifold any suggestions

So you want cams for your standard engine.... What Swedge said, but then also consider some actual engine mods.

[swedge]

And you'll need a pair of verniers to get them set up proper

[Stuart]

And some sort of replacement fuelling system (carbs or mappable management) to put cams that make a real difference in , even with pocketed pistons.

[GRUNT 16V]

best to stay as standard unless you want to spend alot of cash

[swedge]

Yeah as Stuart says if you want any cams worthwhile you'll need a mappable ecu or swap over to carbs as the standard ecu dosnt work will with decent cams