PDA

View Full Version : ASTRA GTE 20XE engine / bits or 90% complete



Jedro
27-05-12, 01:40 PM
think iv given up on my XE build so its all up forsale

coscast head - has been skimmed and pressure tested by auto services at teeside. briefly chemically cleaned. comes with both cams and pullys, X2 sets of lifters soaking in fresh oil. all valves are still intact and fine. brand new head gasket. everything basically. iv got a packet of valve stem oil seals here too

£300 OVNO collected

early XE block - removed from a 1989 GTE back in 1996 (unknown but no doubt, low mileage) has had a rebore to .5mm and has been checked by auto servies at teeside again, pressure washed and painted with red engine lacquer. b.new core plugs, standard (lighter) crank was checked for balancing and is fitted with new main bearings and GM bolts. genuine ZLET oil pump and a FULL genuine bottom end gasket set fresh from autovaux. standard rods with used bearings and a used water pump aswell if you want them?

£180 ONO collected

engine stand - few paint/oil marks here and there but otherwise good condition

£35 collected?

sump and baffle - cleaned and fitted with 2.0l 8v rubber gasket

£25 collected?

starter motor - worked fine when removed from my mates nova XE

£25 collected?

also have dizzy, coil, covers, pick up/dipstick.... LOADS of bits...

COULD DO A DEAL ON THE WHOLE LOT!??


few pics from my thread

http://desmond.imageshack.us/Himg163/scaled.php?server=163&filename=photo0105sa.jpg&res=landing
http://desmond.imageshack.us/Himg204/scaled.php?server=204&filename=photo0104s.jpg&res=landing
http://desmond.imageshack.us/Himg16/scaled.php?server=16&filename=photo0101r.jpg&res=landing
http://desmond.imageshack.us/Himg687/scaled.php?server=687&filename=photo0103d.jpg&res=landing
http://desmond.imageshack.us/Himg713/scaled.php?server=713&filename=photo0088oi.jpg&res=landing
http://desmond.imageshack.us/Himg853/scaled.php?server=853&filename=photo0048x.jpg&res=landing
http://desmond.imageshack.us/Himg232/scaled.php?server=232&filename=photo0049r.jpg&res=landing
http://desmond.imageshack.us/Himg29/scaled.php?server=29&filename=photo0056x.jpg&res=landing
http://desmond.imageshack.us/Himg36/scaled.php?server=36&filename=photo0057l.jpg&res=landing

Jedro
27-05-12, 01:40 PM
http://desmond.imageshack.us/Himg696/scaled.php?server=696&filename=photo0010z.jpg&res=landing
http://desmond.imageshack.us/Himg823/scaled.php?server=823&filename=photo0011ie.jpg&res=landing
http://desmond.imageshack.us/Himg41/scaled.php?server=41&filename=photo0012ha.jpg&res=landing
http://desmond.imageshack.us/Himg405/scaled.php?server=405&filename=photo0013r.jpg&res=landing
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash3/576749_164621283664015_100003484331692_222779_3588 22658_n.jpg
http://desmond.imageshack.us/Himg813/scaled.php?server=813&filename=abcd0006u.jpg&res=landing
http://desmond.imageshack.us/Himg35/scaled.php?server=35&filename=abcd0005de.jpg&res=landing
http://desmond.imageshack.us/Himg23/scaled.php?server=23&filename=abcd0017k.jpg&res=landing
http://desmond.imageshack.us/Himg39/scaled.php?server=39&filename=abcd0015z.jpg&res=landing
http://desmond.imageshack.us/Himg831/scaled.php?server=831&filename=abcd0014p.jpg&res=landing
http://desmond.imageshack.us/Himg10/scaled.php?server=10&filename=abcd0011d.jpg&res=landing
http://desmond.imageshack.us/Himg571/scaled.php?server=571&filename=abcd0009z.jpg&res=landing
http://desmond.imageshack.us/Himg31/scaled.php?server=31&filename=abcd0007ou.jpg&res=landing
http://desmond.imageshack.us/Himg208/scaled.php?server=208&filename=abcd0019n.jpg&res=landing

This is not a discussion thread and sensible offers are more than welcome.

totally honest i cant be bothered for posting stuff out and im not in any rush to get rid of it all

could be an ideal engine for someone to finish off. just needs 86.5mm pistons and the auxiliaries etc..


OFFERS WELCOME ON THE LOT :thumbs:

any questions just ask

Jedro
27-05-12, 01:41 PM
Location durham

Jedro
29-05-12, 04:34 AM
£400 for the whole lot collected, no haggling, no time wasters, someones getting a bargain here!!

scoobyeater
29-05-12, 05:59 AM
location ?

Jedro
29-05-12, 06:58 AM
Location durham
.

Jedro
29-05-12, 07:12 PM
still here!! easy worth loads more broke for bits on ebay

£400 takes the whole lot, including the stand if you want it!!!

paul080803
29-05-12, 08:14 PM
Will you post?

Jedro
29-05-12, 11:20 PM
no sorry mate, collection only

paul080803
30-05-12, 12:11 AM
Ok dude, waaaay too far of me to collect.

Jedro
30-05-12, 10:26 AM
no problems

Jedro
30-05-12, 11:00 PM
final bump before i donate in bits to starving ethiopians via ebay