View Full Version : SBD Underdriver alternator help
Gareth_C
19-05-12, 08:07 PM
Hi all im just trying to get my head round this contraption. Here is the SBD wiring diagram
http://www.sbdev.co.uk/Info_sheets/Alternators/ALT-SM2%20wiring%20instructions.gif
for the two spade pins does that mean there needs to be an ign live on the vertical pin and the dash charging light wire(blue/white strip) need to be on the horizontal?
Cheers Gareth
nevidred
19-05-12, 08:48 PM
Thats how the diagram shows it fella
Dan Stanley
19-05-12, 08:51 PM
But surely the vertical pin must be connected to an earth somewhere? If the ignition light is supposed to work? The horizontal pin is shown as a (ignition) switched live
Gareth_C
20-05-12, 08:52 PM
I'll try hooking an ign live to the motor
the vertical one is obviously the trigger connection for the alt light, so the blue/white should go there, and the ign+ve to the other one, and the bolted terminal has the big red lead to the back of the starter, which in turn goes to the battery.
please don't tell me you bought this kit complete from them?? its a kubota tractor alternator, and can be got cheap
Gareth_C
20-05-12, 11:04 PM
No mate I bought it from a guy off vauxsport everything was brend new I think I paid about £60 posted for the kit
phew, thank god for that.
I've got a similar alt. I think i joined the 2 smaller wires together, which means i don't have a battery light, which doesn't bother me as i've got a volt gauge, but it charges fine..
http://i5.photobucket.com/albums/y191/mrmazz/Nova/DSC_0118Small.jpg
http://i5.photobucket.com/albums/y191/mrmazz/Nova/DSC_0120Small.jpg
http://i5.photobucket.com/albums/y191/mrmazz/Nova/DSC_0256Medium.jpg
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.