View Full Version : fitting a weber 32/34 to 1.3 sr HELP
i have fitted the carb but would like to know what to do with the fuel return pipe, and should the advance and retard be blocked off or not?
conza123
18-05-12, 01:53 PM
did you buy yours as a new kit or just bought a weber and adaptor plate
conza123
18-05-12, 03:11 PM
ill scan my instructions i got from fast road cars when i get home if that helps
mk1nova_rich
18-05-12, 03:47 PM
the Weber doesnt have a fuel return so blank the return off at the tank somehow.
Can't quite remember the layout of the Weber carb but I'm pretty sure you need the dizzy advance vacuum line...T it off the brake servo pipe if you can't figure any other way of doing it
ill scan my instructions i got from fast road cars when i get home if that helps
That would be good thanks and cheers Nova rich
leggattr
18-05-12, 05:49 PM
I've put mine in today on my 1.3. I've used the vapour separator from the 2e3 carb rather than t the return as it will do the same thing. connect the vacuum to the back of the carb. Just make sure you get the correct jets for it. It took a while to keep it going and adjusting the mixture/ throttle etc. I bought mine awhile back and rebuild it so I needed to see if it all worked before I sell my 2e3 and manifold.
waggygsi
19-05-12, 12:50 AM
ive got a weber of a mk2 xflow engine think its a 32 36 or something . looks like its jst had the inlet bodged up to fit the weber
conza123
19-05-12, 04:51 PM
hello mate here they are-
http://i1062.photobucket.com/albums/t485/conza93/File1.jpg
and the instructions:- https://rapidshare.com/files/4277849369/File_1.pdf
leggattr
20-05-12, 12:32 PM
I never fit a gasket between the inlet and adapter plate as I read on hear it doesn't need it! Is it the same one that came off the 2e3?
Jon_nova1
20-05-12, 01:03 PM
You definately need the vac line connected for advance, otherwise you'll get no torque
well you could not have it connected but your drives will be very longlol
boffer8
21-06-13, 11:44 PM
hello mate here they are-
http://i1062.photobucket.com/albums/t485/conza93/File1.jpg
and the instructions:- https://rapidshare.com/files/4277849369/File_1.pdf
I know this is dragging this up a bit, but that's the search function for you ;-) but does anyone have these instructions as this link no longer works :-(
conza123
22-06-13, 08:48 AM
I know this is dragging this up a bit, but that's the search function for you ;-) but does anyone have these instructions as this link no longer works :-(
Ill have to find them again or the file on my computer for you
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.