fitting a weber 32/34 to 1.3 sr HELP

[nova89]

i have fitted the carb but would like to know what to do with the fuel return pipe, and should the advance and retard be blocked off or not?

[conza123]

did you buy yours as a new kit or just bought a weber and adaptor plate

[nova89]

weber and adapter plate

[conza123]

ill scan my instructions i got from fast road cars when i get home if that helps

[mk1nova_rich]

the Weber doesnt have a fuel return so blank the return off at the tank somehow.

Can't quite remember the layout of the Weber carb but I'm pretty sure you need the dizzy advance vacuum line...T it off the brake servo pipe if you can't figure any other way of doing it

[nova89]

ill scan my instructions i got from fast road cars when i get home if that helps

That would be good thanks and cheers Nova rich

[leggattr]

I've put mine in today on my 1.3. I've used the vapour separator from the 2e3 carb rather than t the return as it will do the same thing. connect the vacuum to the back of the carb. Just make sure you get the correct jets for it. It took a while to keep it going and adjusting the mixture/ throttle etc. I bought mine awhile back and rebuild it so I needed to see if it all worked before I sell my 2e3 and manifold.

[waggygsi]

ive got a weber of a mk2 xflow engine think its a 32 36 or something . looks like its jst had the inlet bodged up to fit the weber

[conza123]

hello mate here they are-

http://i1062.photobucket.com/albums/t485/conza93/File1.jpg

and the instructions:- https://rapidshare.com/files/4277849369/File_1.pdf

[leggattr]

I never fit a gasket between the inlet and adapter plate as I read on hear it doesn't need it! Is it the same one that came off the 2e3?

[Jon_nova1]

You definately need the vac line connected for advance, otherwise you'll get no torque

well you could not have it connected but your drives will be very longlol

[boffer8]

hello mate here they are-

http://i1062.photobucket.com/albums/t485/conza93/File1.jpg

and the instructions:- https://rapidshare.com/files/4277849369/File_1.pdf

I know this is dragging this up a bit, but that's the search function for you ;-) but does anyone have these instructions as this link no longer works :-(

[conza123]

I know this is dragging this up a bit, but that's the search function for you ;-) but does anyone have these instructions as this link no longer works :-(

Ill have to find them again or the file on my computer for you