electric windows

[paddy quinn]

can some 1 show me a how to guide for fitting the motors to standard mk2 doors as these were ones with crappy window winders

[Benn]

They bolt/rivet in the same place dude.

[swedge]

yeah they fit int he same mounting positions as the old manual winder, i used rivets on mine

[paddy quinn]

winders had 3 holes the motors i have got 4 hole

[swedge]

hmm you sure? i didnt notice anything like that on mine

[paddy quinn]

a few pics would help as ive never done leccy convertion before

[brainsnova]

Check if yours doors and shell have holes to feed the wires through too while your at it. They are centre punched ready to drill

[paddy quinn]

pics would be better as i dont realy know what to look for but theres two punch parts near the top of the door

[NoVaBoOt26]

Hi mate, ill take some pictures for you tomorrow mate :thumb:

[paddy quinn]

thanks pal

[NoVaBoOt26]

thanks pal

No worries fella

[Mazz]

Wiring is easy to, iirc one earth by the centre console and and plug into the fuse box!

[paddy quinn]

wired them before just never fitted motors mazz

[novasrikev]

the doors already have the 4 holes fella

[paddy quinn]

figured it out today just need to holesaw the parts for the wires does any one know any other wiring gromets i can use cant find any nova ones

[Benn]

Any gromits will do.

[brainsnova]

I used a 20mm hole saw as its a popular grommet size

[cossienova]

Am about to do the same too mine. A guide with some pictures would be good on here if someone could do it.

[AndrewJenkins]

ill try and see if i have all my pics still from when i did mine if so ill write up a how to tonight

[cossienova]

Had a look at mine today. How does the motor arm mate up with the window? The window base looks different on windy windows to the nylon clip on the end of the electric motor arm?

[brainsnova]

Had a look at mine today. How does the motor arm mate up with the window? The window base looks different on windy windows to the nylon clip on the end of the electric motor arm?

The nylon clip that is on the EW motor will slot into the metal channel on the glass

[cossienova]

Great thanks! Will have another go tomorrow