View Full Version : C20XE parts wanted
paul080803
12-04-12, 11:14 PM
Guys looking for the following
- xe uprated cams, for standard pistons, dizzy
- vernier pulleys, early type belt
- arp rod bolts
- new water pump
- performance ignition leads
- headset, genuine or good quality
- sump gasket
Think that's it for now!
alexmyers000
13-04-12, 10:40 AM
ive got a brand new set of arp rod bolts in packaging £45 delivered ?
paul080803
13-04-12, 10:52 AM
ive got a brand new set of arp rod bolts in packaging £45 delivered ?
What is the ARP part number?
alexmyers000
13-04-12, 01:06 PM
its 109-6001
scott.parker
13-04-12, 01:44 PM
When you say head set, i assume your talking gaskets, as Ive got a full set, and a sump one sat in a box that i no longer require as Ive sold the track car, let me know if there what your after.
Scott
paul080803
13-04-12, 04:39 PM
Yes Scott that is what I am after! What make are they and how much posted? Sump as well
Ive got a late type water pump done about 1000 mile
paul080803
13-04-12, 05:28 PM
Ive got a late type water pump done about 1000 mile
Cheers but will put a new one on
scott.parker
13-04-12, 05:34 PM
Yes Scott that is what I am after! What make are they and how much posted? Sump as well
I got the Gaskets from a place called classic gaskets, I'll look and get them out later, i think i might have used the inlet, but defiantly used the exhaust one when i fitted a new manifold.
paul080803
16-04-12, 07:51 PM
I got the Gaskets from a place called classic gaskets, I'll look and get them out later, i think i might have used the inlet, but defiantly used the exhaust one when i fitted a new manifold.
Scott, any luck digging out those gaskets?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.