View Full Version : daves nova gsi let project
So after near completion of my project i thought i would share it with you guys! i am new to png and unsure if this is the correct way to post a project but here goes lol
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash3/553346_10151493687140008_594640007_23652464_131582 0647_n.jpg
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash3/553346_10151493687095008_594640007_23652462_157208 3319_n.jpg
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash3/553346_10151493687175008_594640007_23652465_147506 9185_n.jpg
few snaps of the car before i ripped her appart haha lol
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc7/35767_132102833474074_100000230743317_269551_70376 95_n.jpg
hmm come on rust were are you hiding :wtf:
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/35767_132102820140742_100000230743317_269549_82645 50_n.jpg
seem welded the engine bay etc and covered welds with seem sealer
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/35767_132102826807408_100000230743317_269550_29412 8_n.jpg
decided to leave original brake pipes as they are in mint condition
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/35767_132102840140740_100000230743317_269552_31522 43_n.jpg
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/35767_132102846807406_100000230743317_269553_32474 56_n.jpg
so engine bay is finished for now, no doubt i will have to get the grinder out in the near future lol
I love the sealed welds. Looks really factory pal!
need to tackle wheel arches so after a few coats of stone chip there as good as new!!
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/35767_132105070140517_100000230743317_269568_60288 46_n.jpg
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc7/35767_132105613473796_100000230743317_269571_63500 91_n.jpg
well now its all covered in white stone chip it looks pants lol so back to the motor factors to purchase a few tins of black :thumb: that should sort the job just nicely lol
autoworksnovasport
10-04-12, 09:16 PM
how did you manage to post pics???
I love the sealed welds. Looks really factory pal!
thank you pal, didnt like to leave them bare as looks rough as a bagers **** haha
how did you manage to post pics???
copy and paste m8!! you the chap from park hall??
scorge01
10-04-12, 09:19 PM
Looks mint mate what's your plans wheel wise? Also engine spec etc? Guessing ur running a 5 speed box?
autoworksnovasport
10-04-12, 09:21 PM
copy and paste m8!! you the chap from park hall??
yes chap you been up before??
swifty on ha...
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash2/35767_132105643473793_100000230743317_269575_70634 82_n.jpg
had x2 new rear quater pannels fitted, was not best pleased when i found out they had cut my genuine quaters up to repair the arches grrrr:cry: so it was off with the pannels again and new ones fitted as i asked for in the first place.. any way 4 quaters later, one big hole in my pocket and there done :thumb:
sent all parts off for powder coat, well all parts that wouldnt melt on the oven lol..
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-prn1/558634_10151493594915008_594640007_23652103_129651 1881_n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/398930_10151493597885008_594640007_23652118_101502 3886_n.jpg
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-prn1/536508_10151493602770008_594640007_23652149_102433 2654_n.jpg
so after a few happy snaps with the camera i wasted no time in fitting them :d
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-prn1/532869_10151493632900008_594640007_23652253_731552 533_n.jpg
well theres always time for a smoke and a cuppa lol
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-prn1/523311_10151493626770008_594640007_23652237_517696 289_n.jpg
Looks mint mate what's your plans wheel wise? Also engine spec etc? Guessing ur running a 5 speed box?
thanks m8, no running f28 :s yes best break the grinder out and weld the new mount :D.. hmm soft stars 195 45 16 x4 stud..
c20let run it standard for now then fettle with it in the near future
She does look bloody good mate
yes chap you been up before??
no m8 but i rang u looking for a door but found one in the end thank god lol
autoworksnovasport
10-04-12, 09:34 PM
dont recognise you!
edit : probly because you rang :)
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash3/574930_10151493624410008_594640007_23652229_728446 868_n.jpg
sealed the rear
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash3/549046_10151493631890008_594640007_23652249_348676 664_n.jpg
last bit of prep work before primer :thumb:
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc7/399020_10151493645820008_594640007_23652293_129302 7181_n.jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash3/534646_10151493646750008_594640007_23652296_106587 1039_n.jpg
dont recognise you!
edit : probly because you rang :)
lmao haha
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/399115_10151493648575008_594640007_23652302_167819 2542_n.jpg
well shes all primed now, this should give me time on deciding on colour choice.. oh and a well earned brew :d
after a good think i have decided to keep it in the original colour with light grey trim...
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash3/561229_10151493627870008_594640007_23652241_183164 7613_n.jpg
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash3/575213_10151493628845008_594640007_23652242_735999 732_n.jpg
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash3/527294_10151493630135008_594640007_23652245_158393 9838_n.jpg
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash3/522299_10151493644115008_594640007_23652279_288152 180_n.jpg
few more parts painted..
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash3/544447_10151493641335008_594640007_23652275_172078 9976_n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/578867_10151493642565008_594640007_23652276_163649 1022_n.jpg
door handles are tempory as new carbon fibre ones are en route :)
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/579353_10151493653750008_594640007_23652319_143587 0689_n.jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-prn1/553289_10151493656300008_594640007_23652328_550948 281_n.jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash3/536427_10151493654915008_594640007_23652323_151554 6584_n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash3/581617_10151493668655008_594640007_23652386_146965 5383_n.jpg
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash3/559769_10151493673040008_594640007_23652408_302873 457_n.jpg
picked some new parts up ready for the engine, bored of peicing the car back together lol
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash3/535375_10151493615870008_594640007_23652196_985543 596_n.jpg
shiny shiny :p these may look to much but time will tell
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash3/579712_10151493618135008_594640007_23652205_640804 677_n.jpg
Looks nice
Not fitting a strengthning kit to the bay ? You'll probably need one with a LET
that is all for now... will up date soon
Looks nice
Not fitting a strengthning kit to the bay ? You'll probably need one with a LET
yes mate, have made my own plates for most of it, engine bay will be stripped down to bare metal again in places as need to fit f28 gbox mount n stuff
Doesnt look like you've notched the o/s chassis for the alternator either mate,
Doesnt look like you've notched the o/s chassis for the alternator either mate,
No need as a I have fitted dummy engine and there is plenty of room:)
any one on here have a spare set of interiour door handle surrounds? only need the n/s but will buy both, the ones i need are black but could be painted otherwise.. :)
autoworksnovasport
11-04-12, 10:11 AM
loads here
loads here
tidy how much and when could i pick them up? cheers phil top man :)
No need as a I have fitted dummy engine and there is plenty of room:)
Running solid mounts?
looks like a nice project
great work so far
stu
No need as a I have fitted dummy engine and there is plenty of room:)
Many members have found even with the leg modified or recessed you can still have problems. So If your going to add the F28 mount Id do it at the same time whilst you have an empty engine bay. Comprehensive stitching/plating would also be worth the effort to stop it pulling itself apart in the future also. ;)
Nick.
Tommy_nova
11-04-12, 09:32 PM
Dave you finaly signed up :)
good to see some pics up of my old gsi miss it man
your doing a cracking job fella
Tommy
scorge01
12-04-12, 01:31 AM
How long ago did u own this tommy?
thanks for the input guys will update tomoz, thanks tommy yeah thought i had better sighn up haha :)
bit of an update guys,
where's wally lol
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/579353_10151493653750008_594640007_23652319_143587 0689_n.jpg
what is it with these doors, took me a life time to get the buggers off grrrr:cry:
used corsa pins to re fit as they are sooooooo much better :thumb:
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash3/576212_10151493665985008_594640007_23652371_198007 6030_n.jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash3/579418_10151493667340008_594640007_23652380_205310 1353_n.jpg
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc7/35767_132103873473970_100000230743317_269558_93567 _n.jpg
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash2/35767_132106320140392_100000230743317_269584_26435 99_n.jpg
HELL braided hoses will be replacing these :)
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/299534_288790301138659_100000230743317_1085354_453 288414_n.jpg
no rot in here either he he lol
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc7/580676_10151493670860008_594640007_23652397_175346 383_n.jpg
big smiles as the car has been put back together with only a small selection of nuts and bolts left over lol
need to flat n polish now so on the blower to dan :thumb:
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/299163_292503244100698_100000230743317_1100261_191 5384089_n.jpg
i must say the paint work is like glass after a good polish... cheers dan :)
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/389130_292503354100687_100000230743317_1100266_212 665159_n.jpg
chuffed with the result, really am.. need to order wheels and tyres now!
That does look fantastic.
That does look fantastic.
thanks ben appreciate all positive input :)
so wheels arrived...
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/378743_308031499214539_100000230743317_1146413_169 9019955_n.jpg
so after picking them up from mothers, i had a quick scan threw the tyre stock at work and bought x4 pirelli p zero's.. the tyres were almost twice as much as the wheels but hey no point rolling on hedge finders lol
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/390601_308133595870996_100000230743317_1146689_608 334510_n.jpg
couldnt wait to finish work and fit them :thumb:
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/390491_308817652469257_100000230743317_1148502_102 8827782_n.jpg
yes before you say why am i using monster truck suspension lol the car is on stands lol
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/384582_308818122469210_100000230743317_1148504_201 6149168_n.jpg
Bed time :roll: so will update after work tomoz.. need to upload more pics which may seem simple but for a guy with little knowlage like my self its a hell of a task haha :tard:
Vlietje
16-04-12, 05:39 AM
Sweet!
MARTIN KELSON
16-04-12, 11:10 PM
Where in Shropshire you from Chip?
Where in Shropshire you from Chip?
I'm from oswestry martin. U?
staggy_gsi
17-04-12, 07:00 PM
I hate you....
if i didn't regret selling my white gsi before, i bloody do now!!
Looks stunning mate keep it up
MARTIN KELSON
17-04-12, 09:29 PM
I'm from oswestry martin. U?
Live in Telford but i do actually work in Oswestry. :)
Small world!
shed-on-wheels
17-04-12, 09:55 PM
fooking stunning man!
Live in Telford but i do actually work in Oswestry. :)
Small world!
Yeag it is ha:) were do u work in oswestry?
Yeag it is ha:) were do u work in oswestry?
vauxhall garage mate
will update tonight people!... been busy with the other halfs corsa :roll: fitting a c20xe on jenevy bod's, just waiting for engine to come back from engine centre so have time to update and play with mine :d
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/385371_301770186507337_100000230743317_1128249_152 5813933_n.jpg
decided against the soft stars and fitted these bad boys lol
installed sub today... need some tunes for the drive to santa pod hehe :)
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/308153_288790604471962_100000230743317_1085356_153 716376_n.jpg
please dont be offended by the 6x9s in the shelf as i have a mint uncut one :p
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/292008_288790751138614_100000230743317_1085357_970 373927_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/318325_288791074471915_100000230743317_1085358_567 475410_n.jpg
any way on to the engine.. anit got many snaps as my patients was wearing rather thin to say the least!
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/390422_293813687302987_1031620808_n.jpg
so its all in to a fashon :thumb: need some more samco as boost pipes are blue!
well its in and running but my got shes ugly lol!:wtf:
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/250405_219966441354379_100000230743317_842236_5263 507_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/313487_290601000957589_100000230743317_1091831_764 681354_n.jpg
these new H.I.Ds should be better than them candles in jam jars lol
well some bits for the engine turned up at mothers, hope they change the look of the engine bay...
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/430520_373888555962166_100000230743317_1353881_331 780561_n.jpg
thanks to the guys at TX auto sport :thumb:
also had trouble with radiator... used a 1.2 nova lux rad and cut the fan switch off to fit snug between the intercooler, it wasnt up to much and didnt want to chance bursting the bitch!! ive already had to take the cams out of the engine as the lifters were horrendously noisey grrr :cry: many spanners were bent and re shaped to get cambelt off haha lol..
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash2/64601_373893065961715_100000230743317_1353911_1658 618480_n.jpg
new radiator fitted, again supplied by TX! would recomend them for parts although the silicone aint up to standards tbh...
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/431647_374394215911600_100000230743317_1354716_329 372387_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/419526_374393992578289_100000230743317_1354712_118 828236_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/423083_374393272578361_100000230743317_1354707_237 1312_n.jpg
well i dont know what u guys think but im more than happy with the out come of it... :d
will up date in the nxt few days.. as im busy packing for ibiza baby hahaha :p
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/314467_288791397805216_100000230743317_1085360_203 7109290_n.jpg
the new project :thumb:
MARTIN KELSON
22-04-12, 09:47 PM
I recognise your other halfs Corsa from Oswestry.
scorge01
22-04-12, 11:25 PM
Looking really good mate nice work :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.