Clutch cable

[Bainy_Boy_Sri]

Can you use standard cable on redtop nova or do you need to use a different one? Thanks russell

[mk1nova_rich]

Standard one...but before fitting the cable insert a bar into the cable hole in the bulkhead and bend it down towards the gearbox to give extra clearance otherwise the cable rubs on the inlet manifold and eventually snaps

[Bainy_Boy_Sri]

Cheers mate av got a standard one on it the now but pedal sitting high and cant seem to get gears

[Bainy_Boy_Sri]

Cheers mate av got a standard one on it the now but pedal sitting high and cant seem to get gears

[mk1nova_rich]

Adjust the plastic bit on the end of the cable to adjust the pedal height.

As for the gears...what linkage is on the car?

[Bainy_Boy_Sri]

I done that but it didnt make a difference, its a standard linkage i replaced the old one because it was worn.

[Bainy_Boy_Sri]

Found out what was up with it pressure plate has collapsed

[bazil]

Hope you get it sorted soon chief :)

[Bainy_Boy_Sri]

Hopefully clutch kit comes 2moro, cheers for the other nite mate

[bazil]

No worries mate, hope you make crail

[Benn]

Did you turn the white plastic bit in the linkage?

[bazil]

He did mate, He took the inspection cover off and he saw the pressure plate was gubbed,